Pedrollo Dm10 1Hp Electric Pump User Manual

1. Gabatarwa

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo Dm10 1Hp Electric Pump. Please read this manual thoroughly before using the pump and retain it for future reference.

The Pedrollo Dm10 electric pump is designed for draining clear or slightly dirty water. It is suitable for domestic, civil, and professional applications, including dewatering flooded areas such as basements, garages, and for emptying swimming pools or bathtubs. This pump is also effective for the disposal of non-corrosive wastewater. Its reliability is a key feature, especially in fixed installations with automatic operation.

Key features include a flow rate of up to 300 liters/minute (18 m³/h), a head of up to 16 meters, and a 0.75 kW (1 HP) motor. It comes with a 5-meter cable and a Schuko plug.

2. Bayanin Tsaro

Always observe the following safety precautions to prevent personal injury and damage to the pump:

• Tsaron Wutar Lantarki: Tabbatar da cewa wutar lantarki ta yi daidai da ƙarfin famfontage (220-240V AC). Always connect the pump to a properly grounded outlet. Do not operate the pump with damaged cables or plugs. Never touch the pump or its electrical connections with wet hands.
• Ingancin Ruwa: This pump is designed for clear or slightly dirty water. Do not use it for flammable, corrosive, explosive, or chemically aggressive liquids.
• Nitsewa: The pump must be fully submerged during operation to ensure proper cooling. Operating the pump dry will cause severe damage.
• Yara da Dabbobi: Keep children and pets away from the pump and the area of operation.
• Kulawa: Always disconnect the pump from the power supply before performing any maintenance, cleaning, or inspection.
• Shigarwa: Ensure the pump is placed on a stable, level surface. Do not suspend the pump by its power cable.

3. Samfurin Ya Ƙareview

The Pedrollo Dm10 is a robust electric submersible pump designed for efficient water transfer and drainage. It features a durable construction and an integrated float switch for automatic operation.

Hoto na 1: Pedrollo Dm10 1Hp Electric Pump. This image shows the pump's silver body, blue base, orange handle, and power cable with a float switch, indicating its compact and functional design.

Mabuɗin Abubuwan:

• Jikin famfo: Houses the motor and impeller.
• Base/Inlet Grille: Allows water entry and filters out larger debris.
• Wurin fitarwa: Connects to the discharge hose.
• Shawagi kan ruwa: Yana kunna/kashe famfo ta atomatik bisa matakin ruwa.
• Na USB Power: Connects the pump to the electrical supply.
• Hannu: For easy transport and positioning.

4. Saita

1. Cire kaya: A cire famfon a hankali daga cikin marufinsa. A duba ko akwai wata alama ta lalacewa yayin jigilar kaya.
2. Wuri: Position the pump on a stable, flat surface in the area to be drained. Ensure the pump is fully submerged in water during operation. The float switch must have sufficient space to move freely to activate and deactivate the pump.
3. Haɗin Tushen Fitar Ruwa: Connect a suitable discharge hose to the pump's outlet. Ensure the connection is secure to prevent leaks. The hose should be routed to a safe drainage point, away from the area being dewatered.
4. Haɗin Wutar Lantarki: Connect the pump's 5-meter power cable with the Schuko plug to a grounded 220-240V AC electrical outlet. Ensure the outlet is protected by a Residual Current Device (RCD) for added safety.
5. Daidaita Canjin Tafiya: Adjust the position of the float switch cable to set the desired ON/OFF water levels. The pump will start when the float rises to a horizontal position and stop when it drops below a certain level.

5. Umarnin Aiki

Aiki ta atomatik:

The Pedrollo Dm10 pump is equipped with an integrated float switch for automatic operation. Once connected to power and submerged, the pump will automatically start when the water level rises and lifts the float switch. It will then pump water until the level drops sufficiently for the float switch to fall, turning the pump off.

• Ensure the float switch is free to move and not obstructed by walls or debris.
• Verify that the discharge hose is clear and properly routed.
• Plug the pump into a suitable electrical outlet. The pump will activate when the water level reaches the set 'ON' point of the float switch.
• The pump will stop automatically when the water level drops to the set 'OFF' point.

Manual Operation (if applicable):

While primarily designed for automatic use, some models may allow for manual override by securing the float switch in an 'ON' position. However, this requires constant supervision to prevent dry running and pump damage. Always refer to specific model instructions for manual operation.

6. Kulawa

Regular maintenance ensures the longevity and optimal performance of your pump. Always disconnect the pump from the power supply before any maintenance.

• Cleaning the Inlet Grille: Periodically inspect and clean the inlet grille at the base of the pump to remove any debris (leaves, small stones, etc.) that may obstruct water flow.
• Duban Impeller: If the pump's performance decreases, the impeller might be clogged. Disconnect power, remove the base plate (if accessible), and carefully clear any obstructions from the impeller.
• Duban Kebul da Filogi: Regularly check the power cable and plug for any signs of damage, cuts, or fraying. Replace immediately if damage is found.
• Ajiya: If the pump will not be used for an extended period, clean it thoroughly, drain all water, and store it in a dry, frost-free location.

7. Shirya matsala

Kafin tuntuɓar tallafin fasaha, sakeview Abubuwan gama gari da mafita masu zuwa:

If problems persist after following these steps, please contact qualified service personnel.

8. Ƙayyadaddun bayanai

9. Garanti da Tallafawa

Specific warranty details are typically provided at the point of purchase or within separate documentation accompanying the product. Please refer to your purchase receipt or contact the retailer for warranty information.

For technical support, spare parts, or service inquiries, please contact your authorized Pedrollo dealer or the customer service department of your retailer. When contacting support, please have your pump's model number (Dm 10 5MT) and purchase date available.