Jagorar Mai Amfani da Ƙofar VoIP GSM ta Yestar NeoGate TG800 8-Channel

1. Gabatarwa

This manual provides detailed instructions for the installation, configuration, and operation of the Yeastar NeoGate TG800 8-Channel VoIP GSM Gateway. The TG800 is designed to bridge GSM networks with IP-based systems, enabling cost-effective communication solutions for homes and small offices.

Hoto na 1: Gaba view of the Yeastar NeoGate TG800, showing the eight GSM antennas, Ethernet ports, and status indicator lights.

2. Saita

Abubuwan Kunshin 2.1

Tabbatar cewa duk abubuwa suna nan a cikin kunshin:

• Yeastar NeoGate TG800 Unit
• Adaftar Wuta
• Ethernet Cable
• GSM Antennas (8 units)
• Jagorar Shigarwa Mai sauri

2.2 Shigarwa na Jiki

1. Haɗa Eriya: Screw the eight GSM antennas onto the corresponding connectors on the rear panel of the TG800.
2. Saka Katunan SIM: Locate the SIM card slots on the front panel. Insert up to eight standard SIM cards into the slots, ensuring correct orientation.
3. Haɗa Cable Network: Connect one end of the Ethernet cable to the LAN port on the TG800 and the other end to your network router or switch.
4. Haɗa Ikon: Connect the power adapter to the TG800's power input and then plug it into an electrical outlet. The device will power on automatically.

2.3 Tsarin Cibiyar Sadarwa ta Farko

By default, the TG800 obtains an IP address via DHCP. To access the web dubawa:

1. Identify the IP address assigned to the TG800 using your router's DHCP client list or a network scanning tool.
2. Bude a web browser and enter the IP address of the TG800.
3. Shiga ta amfani da tsoho sunan mai amfani da kalmar sirri (koma zuwa ga Saurin Shiga Jagora don tsoho takardun shaidarka).
4. Configure network settings (Static IP, DHCP Client, VLAN) as required for your network environment.

3. Umarnin Aiki

3.1 Web Interface Overview

The web interface provides comprehensive control over the TG800's functions, including:

• Matsayi: Monitor system status, GSM module status, and network connectivity.
• Trunks: Configure SIP and IAX2 trunks for connecting to IP PBXs or VoIP service providers.
• Hanyar Kira: Set up inbound and outbound call routes between GSM and VoIP.
• GSM Settings: Manage SIM card settings, SMS, and USSD operations.
• Saitunan Tsari: Configure time, date, firmware updates, and user accounts.

3.2 Basic Call Functionality

Once configured, the TG800 facilitates calls between the GSM network and your VoIP system.

• Outbound Calls: Calls from your IP PBX or VoIP phones are routed through the TG800 to the GSM network based on configured outbound routes.
• Kira mai shigowa: Calls received on the GSM SIM cards are routed through the TG800 to your IP PBX or specific VoIP extensions based on configured inbound routes.

4. Kulawa

4.1 Sabunta Firmware

Regularly check the Yeastar website for firmware updates. Updating the firmware ensures optimal performance, security, and access to new features.

1. Zazzage sabuwar firmware file from the official Yeastar support portal.
2. Access the TG800 web dubawa.
3. Navigate to the System Settings > Firmware Upgrade section.
4. Loda firmware da aka sauke file and follow the on-screen instructions. Do not power off the device during the upgrade process.

4.2 Tsaftacewa da Kulawa

Tsaftace na'urar kuma ba ta da ƙura.

• Use a soft, dry cloth to wipe the exterior.
• Ka guji yin amfani da masu tsabtace ruwa ko kayan goge baki.
• Tabbatar da samun iska mai kyau a kusa da na'urar don hana zafi.

5. Shirya matsala

5.1 Batutuwa gama gari da Magani

• Babu Ƙarfi:

  Tabbatar cewa an haɗa adaftar wutar amintacce zuwa duka na'urar da madaidaicin wutar lantarki.

• Babu Haɗin Yanar Gizo:

  Check the Ethernet cable connection. Verify network settings in the web interface. Confirm your router is assigning an IP address or that static IP settings are correct.

• GSM Modules Not Registering:

  Ensure SIM cards are correctly inserted and active. Check antenna connections. Verify GSM signal strength in the web interface. Contact your mobile operator if issues persist.
• Calls Not Connecting:

  Review SIP trunk configurations and call routing rules in the web interface. Check firewall settings on your network to ensure SIP/IAX2 ports are open.

5.2 LED Manuniya

LEDs na gaban panel suna ba da bayanin matsayi:

• LED Power: Solid green indicates power on.
• Tsarin LED: Indicates system status (e.g., blinking for normal operation, solid for boot-up).
• LAN LED: Indicates Ethernet link status and activity.
• GSM Channel LEDs: Indicate the status of each GSM module (e.g., solid for registered, blinking for activity, off for unregistered).

6. Ƙayyadaddun bayanai

7. Garanti da Tallafawa

7.1 Garanti na Samfur

The Yeastar NeoGate TG800 is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Yeastar website don cikakken garanti sharuɗɗa da sharuɗɗa. Ajiye shaidar siyan ku don da'awar garanti.

7.2 Tallafin Fasaha

For technical assistance, troubleshooting, or further inquiries, please contact Yeastar technical support through their official website. Online resources, including FAQs, knowledge bases, and forums, may also be available.

Yeastar Official Website: www.yeastar.com