Einhell TC-JS 80 600W Jigsaw Instruction Manual

1. Gabatarwa

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TC-JS 80 600W Jigsaw. Please read this manual thoroughly before using the tool and keep it for future reference.

The Einhell TC-JS 80 is a powerful jigsaw designed for various cutting tasks. It features an adjustable 4-position pendulum function and electronic speed control for adapting to different materials. Its design includes dust extraction capability and a rotating saw shoe for miter cuts up to 45°.

2. Umarnin Tsaro

Gargadin Tsaro na Kayan Wuta na Gabaɗaya:

• Always wear eye protection and hearing protection when operating the jigsaw.
• Tsaftace wurin aiki da tsabta da haske. Wurare masu duhu ko duhu suna kiran haɗari.
• Kada a yi amfani da kayan aikin wuta a cikin abubuwan fashewa, kamar a gaban ruwa mai ƙonewa, gas, ko ƙura.
• Ka nisanta yara da masu kallo yayin aiki da kayan aikin wuta. Hankali na iya sa ka rasa iko.
• Ensure the power cord is not damaged and is kept away from heat, oil, sharp edges, or moving parts.
• Always unplug the tool from the power source before making any adjustments, changing accessories, or storing the tool.
• Tsare kayan aikin. Yi amfani da clamps ko vise don riƙe kayan aikin da ƙarfi.
• Kada ku wuce gona da iri. Ka kiyaye ƙafar ƙafa da daidaito a kowane lokaci.
• Yi amfani da kayan aikin da ya dace don aikace-aikacenka. Kada ka tilasta kayan aikin.
• Kula da kayan aiki tare da kulawa. Ci gaba da yankan kayan aiki da kaifi da tsabta.
• Bincika rashin daidaituwa ko ɗaure sassa masu motsi, karyewar sassa, da kowane yanayin da zai iya shafar aikin kayan aiki.

Specific Jigsaw Safety Warnings:

• Riƙe kayan aikin ta hanyar amfani da saman riƙo mai rufi yayin yin aiki inda kayan aikin yankewa zasu iya taɓa wayoyin da aka ɓoye ko igiyar sa.
• Yi amfani da clamps ko wata hanya mai amfani don tabbatarwa da tallafawa aikin aikin zuwa ingantaccen dandamali.
• Ensure the blade is sharp and suitable for the material being cut.
• Do not touch the blade immediately after use, as it may be hot.

3. Samfurin Ya Ƙareview da kuma abubuwan da aka gyara

Familiarize yourself with the various parts of your Einhell TC-JS 80 Jigsaw.

Hoto 3.1: Gabaɗaya view of the Einhell TC-JS 80 Jigsaw.

This image shows the complete jigsaw unit, highlighting its compact design and the attached saw blade with a parallel guide for precise cuts.

• Hannu: An ƙirƙira Ergonomically don jin daɗin riko.
• Kunnawa/Kashewa: Located on the handle for easy access.
• Gwanin Gudun Buga: Allows adjustment of cutting speed.
• Pendulum Function Selector: Adjusts the blade's orbital action for faster or finer cuts.
• Ganin Blade Clamp: Secures the saw blade in place.
• Base Plate (Saw Shoe): Supports the tool on the workpiece and can be angled for miter cuts.
• Tashar Cirar Kura: For connecting a dust extraction system.
• Jagoran Daidaitawa: Assists in making straight cuts parallel to an edge.

Figure 3.2: Detail of the blade clampinji inji.

This image provides a closer look at the area where the saw blade is inserted and secured, including the blade guide roller.

Figure 3.3: Ergonomic handle design.

This image highlights the comfortable, non-slip grip of the jigsaw's handle, designed for user comfort during operation.

Figure 3.4: Speed control dial.

This image shows the dial used to adjust the electronic speed control, allowing the user to select the appropriate cutting speed for different materials.

4. Saita

4.1. Shigar da Saw Blade

1. Tabbatar cewa an cire haɗin jigsaw ɗin daga tushen wutar lantarki.
2. Locate the hex lock/Allen key for the blade clamp.
3. Loosen the screw on the blade clamp ta amfani da maɓallin Allen.
4. Saka tsinken gani a cikin ruwan clamp tare da hakora suna fuskantar gaba.
5. Ensure the back of the blade fits into the guide roller.
6. Tighten the screw firmly to secure the blade. Do not overtighten.

4.2. Adjusting the Base Plate for Miter Cuts

The base plate can be angled up to 45° for miter cuts.

1. Unplug the jigsaw.
2. Loosen the screws that secure the base plate to the main body of the jigsaw.
3. Tilt the base plate to the desired angle (up to 45° left or right). Use a protractor for accuracy if needed.
4. Tighten the base plate screws securely.

Figure 4.1: Flexible cuts up to 45 degrees.

This graphic demonstrates the capability of the jigsaw to perform angled cuts by tilting its base plate up to 45 degrees in either direction.

5. Umarnin Aiki

5.1. Kunnawa / Kashewa

• To turn on the jigsaw, press the On/Off switch.
• To turn off, release the On/Off switch.

5.2. Daidaita Gudu

The electronic speed controller allows you to adjust the cutting speed based on the material and desired finish.

• Rotate the speed control dial (Figure 3.4) to increase or decrease the blade strokes per minute.
• Lower speeds are generally used for harder materials or for more precise cuts.
• Higher speeds are suitable for softer materials and faster cutting.

Figure 5.1: Speed vs. Exact cutting.

This graphic illustrates the difference between high-speed cutting (for quick material removal) and exact cutting (for precision), which can be controlled by the electronic speed setting.

5.3. Using the Pendulum Function

The 4-position pendulum function controls the orbital action of the blade, affecting cutting speed and finish.

• Position 0 (No Pendulum): For fine cuts, cutting thin materials, or cutting metal. The blade moves straight up and down.
• Positions I, II, III (Increasing Pendulum): For faster cutting in wood and other soft materials. The blade moves in an elliptical motion, clearing chips more aggressively.
• Adjust the pendulum selector lever to the desired position.

Figure 5.2: Pendulum function settings.

This graphic visually explains how the pendulum function alters the blade's movement, from a straight up-and-down motion to an orbital motion, for varying cutting speeds and finishes.

5.4. Cirar Kura

For a cleaner work environment, connect a dust extraction system to the dust extraction port.

• Attach a suitable vacuum cleaner hose to the dust extraction port at the rear of the jigsaw.
• Ensure the connection is secure before operating the tool.

6. Kulawa

Kulawa na yau da kullun yana tabbatar da tsawon rai da ingantaccen aikin jigsaw ɗin ku.

6.1. Tsaftacewa

• Koyaushe cire kayan aikin kafin tsaftacewa.
• Clean the ventilation slots regularly to prevent overheating.
• Remove dust and debris from the blade area and base plate after each use.
• Use a soft brush or compressed air for cleaning. Do not use solvents or abrasive cleaners.

6.2. Maye gurbin Ruwa

Replace dull or damaged saw blades promptly to ensure efficient and safe cutting. Refer to Section 4.1 for blade installation steps.

6.3. Adana

• Store the jigsaw in a dry, secure place out of reach of children.
• Tabbatar cewa igiyar wutar tana murƙushewa da kyau kuma bata kunna ba.

7. Shirya matsala

8. Ƙayyadaddun bayanai

9. Garanti da Tallafawa

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Einhell customer service directly. Keep your proof of purchase for warranty claims.

Tsawon Lokacin Samun Kayayyakin Kaya na EU: Shekara 1