Livex Lighting Aero 2-Light Bath Light

1. Bayanin Tsaro

GARGADI: To avoid electric shock, always shut off power at the fuse or circuit breaker before installation, servicing, or changing bulbs. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about installation, consult a qualified electrician.

Dole ne a shigar da wannan samfurin daidai da ƙa'idar shigarwa ta mutumin da ya saba da gini da aiki da samfurin da kuma haɗarin da ke tattare da shi.

2. Samfurin Ya Ƙareview

The Livex Lighting Aero 2-Light Bath Light (Model 10102-05) features a sleek, contemporary design suitable for various bathroom aesthetics. It provides soft, diffused light through tubular etched opal glass shades. This fixture can be mounted either horizontally or vertically to suit your preference and space requirements.

Image: The Livex Lighting Aero 2-Light Bath Light shown in both vertical and horizontal mounting orientations, featuring a polished chrome finish and satin opal white glass shades.

Mabuɗin fasali:

• Zane Na Zamani: Elegant modern aesthetic suitable for various interiors.
• Gina Mai Dorewa: Made from high-quality alloy steel for strength and longevity.
• Haƙuri iri-iri: Ana iya shigar da shi a kwance ko a tsaye.
• Diffused Lighting: Satin opal white hand-blown twist-lock cylinder glass provides soft, flattering light.
• Gama: Chrome mai goge.

3. Abubuwan Jerin

Carefully unpack all parts and check for any damage. Retain all packaging material until you are satisfied with the product. The following components are typically included:

• Dutsen Plate
• Hawan Haɗawa
• Fixture Wire Nuts
• Jikin Gyara
• Glass Shades (2)
• Bulb Sockets (2)
• Bulbs (ba a haɗa su ba)

Image: An exploded diagram showing the individual components of the Livex Lighting Aero 2-Light Bath Light, including the mounting plate, fixture body, and glass shades.

4. Saita da Shigarwa

Kafin Ka Fara: Ensure the power is OFF at the circuit breaker. Read all instructions carefully before proceeding.

Assembling the Fixture (Refer to Fig. 1 in the diagram):

1. Shut off power at the circuit breaker. Remove old fixture and all hardware from the junction box.
2. Unpack your new fixture and lay out all parts on a clean, clear area. Take care not to lose any small parts necessary for installation.
3. Thread the two mounting screws about 1/4" into the pre-drilled holes in the mounting plate, spaced to match the distance apart as the holes in the fixture back plate. Attach the mounting plate to the junction box using two junction box screws as shown. The side of the mounting plate marked "GND" must face out. Ba a haɗa akwatin mahaɗin ba.
4. Jagorar wayoyi masu daidaitawa ta cikin rami a tsakiyar farantin hawa.
5. Bi umarnin waya a hankali (duba siffa 2).
6. Tada lamp body(B) onto the mounting plate, aligning the holes with mounting screws, then lock it securely with the ball nuts(C).
7. Install the light bulbs (not included) in accordance with the fixture's specifications. NOTE: KADA KA WUCE WUTATAGE RATING!
8. Raise the glass(A) and insert it over the lamp holder, then twist it clockwise until tight.

Connecting the Wires (Refer to Fig. 2 in the diagram):

1. Connect the electrical wires as follows: Connect the Black wire from the fixture to the black house (hot) wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture's ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
2. Juya haɗin waya da kyau a cikin akwatin mahaɗin bango.

An gama shigar ku yanzu. Mayar da wutar lantarki zuwa akwatin mahaɗa kuma gwada kayan aiki.

5. Umarnin Aiki

The Livex Lighting Aero 2-Light Bath Light operates via a standard wall switch. Ensure the fixture is properly installed and wired according to the instructions in Section 4. Once power is restored to the circuit, use the wall switch to turn the light fixture on or off.

This fixture is compatible with toggle switches, as indicated in the product specifications.

6. Kulawa

To maintain the appearance and functionality of your Livex Lighting Aero 2-Light Bath Light, follow these guidelines:

• Tsaftacewa: Always turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. For polished chrome finishes, a slightly damp cloth with mild soap can be used, followed by immediate drying to prevent water spots. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish.
• Gilashin Inuwa: The satin opal white glass shades can be gently wiped with a soft, damp cloth. Ensure they are completely dry before reattaching.
• Sauyawa Bulb: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before handling. Use only E12 base bulbs with a maximum wattage na 60 watts da kwan fitila.
• Dubawa: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.

7. Shirya matsala

If your Livex Lighting Aero 2-Light Bath Light is not functioning correctly, refer to the following common issues and solutions:

8. Ƙayyadaddun bayanai

9. Garanti da Tallafawa

Bayanin Garanti:

This Livex Lighting product comes with a Garanti na Shekara 1 daga ranar sayayya. Wannan garantin yana ɗaukar lahani a cikin kayan aiki da aiki ƙarƙashin amfani na yau da kullun. Da fatan za a riƙe shaidar siyan ku don da'awar garanti.

Taimakon Abokin Ciniki:

For assistance with parts, assembly, or any other inquiries regarding your Livex Lighting Aero 2-Light Bath Light, please contact customer service:

Wayar Sabis na Abokin Ciniki: 800-761-8056

Please have your model number (10102-05) available when contacting support.