1. Muhimman Bayanan Tsaro
Da fatan za a karanta kuma ku fahimci duk umarnin kafin fara shigarwa. Rashin bin waɗannan umarnin na iya haifar da girgiza wutar lantarki, wuta, ko wasu haɗari waɗanda zasu iya haifar da lalacewar dukiya ko rauni na mutum.
- GARGADI: Hadarin girgiza wutar lantarki. Cire haɗin wuta a fuse ko na'urar da'ira kafin shigarwa ko sabis.
- Dole ne a shigar da wannan samfurin daidai da ƙa'idar shigarwa ta mutumin da ya saba da gini da aiki da samfurin da kuma haɗarin da ke tattare da shi.
- Yi amfani da wutar lantarki ta AC 120V, 60Hz kawai.
- Do not install in wet locations. Suitable for dry locations only.
- Tabbatar cewa duk haɗin wutar lantarki amintattu kuma sun bi ka'idodin gida da farillai.
- Do not modify the fixture or attempt to repair integrated LED components.
2. Abubuwan Kunshin
Tabbatar cewa duk abubuwan da aka gyara suna nan kafin fara shigarwa:
- LED Undercabinet Light Fixture (1)
- Masu Haɗawa (2)
- Mai haɗa Waya (3)
- Umarnin Shigarwa (Wannan takarda)
Hoto na 1: Kichler 12066SS30 LED Direct Wire Undercabinet Light. This image displays the stainless steel fixture with its integrated LED light source and rocker switch.
3. Umarnin Shigarwa
3.1 Pre-Shigar
- Kashe wuta: Locate the circuit breaker or fuse box and turn off the power to the area where the light will be installed. Verify power is off using a voltage gwajin.
- Ƙayyade wurin hawa: Choose a suitable location under a cabinet, ensuring it is a dry indoor environment.
3.2 Haɓaka Ƙaddamarwa
- Position the fixture against the desired mounting surface.
- Mark the locations for the mounting screws.
- Hana ramukan matukin jirgi idan ya cancanta.
- Secure the fixture to the surface using the provided mounting screws. Ensure the fixture is firmly attached.
3.3 Electrical Wiring (Direct Wire)
This fixture is designed for direct wiring to a 120V AC power source.
- Carefully remove the wiring compartment cover on the fixture.
- Connect the incoming baki (hot) wire from the power supply to the baki wire of the fixture using a wire connector.
- Connect the incoming fari (neutral) wire from the power supply to the fari wire of the fixture using a wire connector.
- Connect the incoming kore or bare copper (ground) wire from the power supply to the kore or bare copper wire of the fixture using a wire connector.
- Ensure all connections are tight and secure. Tuck wires neatly into the wiring compartment and replace the cover.
3.4 Inter-Connectable Feature
This fixture can be inter-connected with other compatible Kichler undercabinet lights for custom runs. Refer to the specific instructions provided with Kichler inter-connectable accessories for proper connection methods.
4. Umarnin Aiki
The Kichler 12066SS30 LED Undercabinet Light features an integrated On/Off rocker switch for easy operation.
- To turn the light ON, press the rocker switch to the 'ON' position.
- To turn the light KASHE, press the rocker switch to the 'OFF' position.
5. Kulawa
The Kichler 12066SS30 LED Undercabinet Light requires minimal maintenance.
- Tsaftacewa: Tabbatar cewa an kashe wuta kafin tsaftacewa. Shafa kayan aiki da laushi, bushe, ko dan kadan damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or LED components.
- LEDs: The LED light source is integrated and designed for long-term use. It is not user-replaceable.
6. Shirya matsala
If the light fixture does not operate correctly, refer to the following troubleshooting guide:
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Haske baya kunnawa | Babu iko ga kayan aiki. | Check circuit breaker or fuse. Ensure wall switch (if applicable) is ON. Verify all wire connections are secure. |
| Haske flickers. | Sako da wayoyi. | Turn off power and check all wire connections for tightness. |
| Haske ya dushe. | Voltage ko kuskuren wayoyi. | Verify power supply is 120V. Consult a qualified electrician if issues persist. |
If you are unable to resolve the issue, contact Kichler customer support or a qualified electrician.
7. Ƙayyadaddun bayanai
- Samfura: 12066SS30
- Alamar: Kichler
- Girma: 12.75"L x 4"W x 1"H
- Nauyin Abu: 1.52 fam
- Gama: Bakin Karfe
- Nau'in Tushen Haske: Hadakar LED
- Zazzabi Launi: 3000 Kelvin (Farin Dumi)
- Watatage: 5 watts
- Haske: 225.60 lumen
- inganci: 40 lumen a kowace watt
- Voltage: 120 Volts
- Nau'in Shigarwa: Surface Mount, Direct Wire or Inter-connectable
- Hanyar sarrafawa: Kunna/Kashe Rocker Switch
- Amfani na cikin gida/Waje: Indoor use only (Dry locations)
8. Garanti da Tallafawa
For warranty information or technical support, please contact Kichler customer service. Details regarding specific warranty terms and conditions are typically provided with the product packaging or can be found on the official Kichler website.
Kichler Website: www.kichler.com
