1. Gabaɗaya Umarnin Tsaro
Koyaushe karanta kuma ku fahimci duk gargaɗin aminci, umarni, zane-zane, da ƙayyadaddun bayanai da aka bayar tare da wannan kayan aikin wutar lantarki. Rashin bin duk umarnin da aka jera a ƙasa na iya haifar da girgiza wutar lantarki, wuta, da/ko mummunan rauni.
- Tsaron Yankin Aiki: Kiyaye yankin aikinku tsabta da haske sosai. Wurare masu duhu ko duhu suna kiran haɗari. Kada a yi amfani da kayan aikin wuta a cikin abubuwan fashewa, kamar a gaban ruwa mai ƙonewa, gas, ko ƙura.
- Tsaron Wutar Lantarki: Dole ne matosai na kayan aikin wuta su yi daidai da abin fita. Kada a taɓa gyara filogi ta kowace hanya. Kada ku zagi igiya. Kada a taɓa amfani da igiya don ɗauka, ja, ko cire kayan aikin wutar lantarki. Ka nisantar da igiya daga zafi, mai, gefuna masu kaifi, ko sassa masu motsi.
- Tsaro na Keɓaɓɓen: Always wear eye protection, dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Amfani da Kulawa: Kar a tilasta kayan aikin wutar lantarki. Yi amfani da madaidaicin kayan aikin wuta don aikace-aikacenku. Cire haɗin filogi daga tushen wutar lantarki kafin yin kowane gyare-gyare, canza kayan haɗi, ko adana kayan aikin wuta.
- Specific Miter Saw Safety: Tabbatar cewa kayan aikin yana amintacce clamped before cutting. Keep hands clear of the cutting area and the blade. Allow the blade to reach full speed before beginning a cut.
2. Samfurin Ya Ƙareview da kuma abubuwan da aka gyara
The Einhell TC-MS 2513 L Miter Saw is designed for precise and efficient cutting tasks. Familiarize yourself with its key components for safe and effective operation.
Hoto na 2.1: Gabaɗaya view of the Einhell TC-MS 2513 L Miter Saw, showcasing its compact and robust design with the dust collection bag attached.
Hoto na 2.2: A user demonstrating the proper stance and operation of the miter saw for cutting a wooden workpiece.
Hoto na 2.3: Kusa view of the integrated laser guide, projecting a precise line onto the workpiece for accurate cutting alignment.
Hoto na 2.4: The adjustable X-Tend supports, designed to provide stable support for longer workpieces during cutting operations.
Hoto na 2.5: Illustration of the saw head tilting mechanism, allowing for easy adjustment to achieve precise miter cuts.
Hoto na 2.6: A close-up of the high-quality carbide-tipped saw blade, designed for clean and powerful cuts.
Mabuɗin Abubuwan:
- Swivel Plate: High-quality base with exact angle adjustment for angular cuts.
- Saw Head: Can be tilted to the left for miter cuts.
- Jagorar Laser: Mains-powered laser marks the cutting line for quick and precise positioning.
- Clamping Device: Robust mechanism to securely fix workpieces.
- X-Tend Supports: Adjustable supports for processing long workpieces.
- Integrated Stop: Ensures precise and repeatable cuts.
- Saw Blade: Superior quality carbide-tipped blade for clean and powerful cutting.
- Jakar Tarin Kura: Effective for maintaining a clean workplace by collecting sawdust.
- Hannun Daukewa: For simple and safe transportation of the tool.
3. Saita
Before operating the miter saw, ensure it is properly set up and secured.
- Cire kaya da dubawa: Carefully remove the saw from its packaging. Inspect all components for any damage that may have occurred during transit. Ensure all listed parts are present.
- Shigar da Saw: For stable operation, it is recommended to mount the miter saw to a workbench or a stable stand using appropriate fasteners.
- Attaching the Dust Bag: Connect the provided dust collection bag to the dust extraction port on the saw. Ensure it is securely fastened to effectively collect sawdust during operation.
- Adjusting X-Tend Supports: Extend the X-Tend supports as needed to provide adequate support for the length of your workpiece. These supports can be adjusted with one hand.
- Haɗin Wuta: Connect the saw's power cord to a suitable 230V power outlet. Ensure the power switch is in the OFF position before plugging in.
4. Umarnin Aiki
Follow these steps for safe and effective operation of your Einhell TC-MS 2513 L Miter Saw.
- Workpiece Placement: Place the workpiece firmly against the fence and on the saw table.
- Kare Wurin Aiki: Use the robust clamping device to securely fix the workpiece in place. This is crucial for preventing movement during cutting and ensuring safety.
- Setting the Cutting Angle (Miter Cut):
- Loosen the locking handle for the swivel plate.
- Rotate the swivel plate to the desired angle, indicated on the scale. The high-quality swivel plate allows for exact angle adjustment.
- Lock the swivel plate in position with one hand.
- Setting the Bevel Angle (Tilt Cut):
- To make miter cuts, the saw head can be tilted to the left.
- Adjust the tilt angle as required and secure it.
- Amfani da Hanyar Laser: Activate the mains-powered laser. The laser line will project onto your workpiece, indicating the precise cutting path. Use this guide for quick and accurate positioning.
- Yin Yankewa:
- Ensure the area around the blade is clear of obstructions and your hands.
- Press the power switch to start the saw. Allow the blade to reach its full operating speed (4000 rpm) before beginning the cut.
- Slowly and steadily lower the saw blade through the workpiece. Do not force the saw.
- Da zarar an gama yanke, saki wutar lantarki kuma a bar ruwan ya tsaya gaba daya kafin ya ɗaga kan gani.
- Using the Integrated Stop: For repetitive cuts of the same length, utilize the integrated stop feature to ensure consistent and precise results.
Hoto na 4.1: Diagram illustrating various cutting angles and their corresponding maximum cutting capacities (e.g., 90°x90°: 130x75 mm, 45°x45°: 95x35 mm).
5. Kulawa
Kulawa akai-akai yana tabbatar da tsawon rai da kuma ingantaccen aikin injin yanke igiyar ku.
- Tsaftacewa: After each use, disconnect the saw from the power supply. Clean the saw thoroughly, especially around the blade guard, table, and dust collection port, to remove sawdust and debris. The sawdust collection bag should be emptied regularly.
- Blade Inspection and Replacement: Regularly inspect the carbide-tipped saw blade for sharpness and damage. A dull or damaged blade can lead to poor cuts and increased strain on the motor. Replace the blade when necessary, following the instructions in your detailed product manual for safe blade removal and installation.
- Lubrication: Periodically lubricate moving parts as recommended in the full product manual to ensure smooth operation.
- Duban Igiya: Check the power cord for any signs of damage, cuts, or fraying. Replace damaged cords immediately by a qualified professional.
6. Shirya matsala
Wannan sashe yana magance matsalolin da ka iya tasowa da injin yanke igiyarka.
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Saw baya farawa | No power supply; Faulty switch; Motor overload protection activated | Duba haɗin wutar lantarki; Tuntuɓi cibiyar sabis; Bari injin ya huce |
| Yanke mara inganci | Dull blade; Incorrect angle setting; Workpiece not clamped amin | Replace blade; Re-adjust angle precisely; Secure workpiece firmly with clampna'urar |
| Ƙura mai yawa / guntuwa | Dust bag full or improperly attached; Clogged dust port | Empty and reattach dust bag; Clear any blockages in the dust port |
| Saw blade binds in workpiece | Workpiece not supported; Forcing the cut; Dull blade | Use X-Tend supports; Do not force, let saw do the work; Replace blade |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Einhell customer support.
7. Ƙayyadaddun bayanai
Technical data for the Einhell TC-MS 2513 L Miter Saw:
Hoto na 7.1: Icon indicating a blade diameter of 250 mm and 48 teeth.
Hoto na 7.2: Icon representing the integrated laser guide feature.
Hoto na 7.3: Icon indicating a maximum cutting width of 130 mm.
Hoto na 7.4: Icon indicating a maximum cutting height of 75 mm.
- Samfura: TC-MS 2513 L
- Lambar Samfura: 4300850
- Shigar da Wuta: 1200 Watts
- Voltage: 230 Volts
- Gudun No-Load: 4000 rpm
- Diamita Tsawon Wuta: mm250 ku
- Yawan Hakora: 48
- Max. Yankan Nisa: 120 mm (at 90°)
- Max. Zurfin Yanke: 75 mm (at 90°)
- Girma (L x W x H): 73 x 66.8 x 52.5 cm
- Nauyi: 9.75 kilogiram
- Tsawon igiya: Mita 1.4
- Kayan Aiki: Polypropylene
- Siffofin Musamman: Depth adjustment, Laser, X-Tend supports
- Abubuwan da aka haɗa: 1 Miter Saw, 1 Saw Blade, 1 Dust Bag
8. Garanti da Tallafawa
Einhell is committed to the quality and longevity of its products.
- Garanti mai tsawo: In addition to the standard warranty, Einhell offers an extended 3-year warranty on all Einhell devices upon online registration. To activate this extended service, products must be registered on the official Einhell website a cikin kwanaki 30 na sayan.
- Taimakon Abokin Ciniki: For further assistance, technical support, or spare parts, please visit the official Einhell website ko tuntuɓi sashen sabis na abokin ciniki.
Hoto na 8.1: Badge indicating the 3-year warranty available upon online registration.
