Gewiss GW30411 Electronic 2-Channel Programmer User Manual

1. Gabatarwa

This manual provides essential information for the safe and efficient use of your Gewiss GW30411 Electronic 2-Channel Programmer. Please read these instructions carefully before installation and operation, and retain them for future reference. The GW30411 is designed for precise control of electrical circuits over time.

2. Bayanin Tsaro

WARNING: Risk of electric shock. Installation and maintenance should only be performed by qualified personnel.

• Koyaushe ka cire wutar lantarki kafin sakawa ko gyara na'urar.
• Ensure all wiring complies with local electrical codes and regulations.
• Kada a bijirar da na'urar ga danshi, matsananciyar zafi, ko mahalli masu lalata.
• Do not attempt to open or modify the device; there are no user-serviceable parts inside.
• A kiyaye nesa da yara.

3. Samfurin Ya Ƙareview

The Gewiss GW30411 is an electronic 2-channel programmer designed for managing electrical loads with timed switching. It features a clear digital display and intuitive controls for setting programs.

Hoto 1: Gaba view of the Gewiss GW30411 Programmer. The display shows the current time (10:22), day (VE 13 GIU, likely Friday 13th June), and the 'ON' status, indicating an active program. Buttons for navigation and setting are visible on the right side.

Mabuɗin fasali:

• Digital display for time and program status.
• Two independent channels for flexible programming.
• Aikin canza yanayin hannu.
• Ƙirar ƙira don sauƙi shigarwa.

4. Saita da Shigarwa

Installation should be carried out by a qualified electrician. Ensure the main power supply is disconnected before proceeding.

4.1 Haɗawa

Mount the programmer in a suitable electrical enclosure or on a DIN rail, ensuring adequate ventilation and protection from environmental factors.

4.2 Wayoyi

1. Identify the power supply terminals (L and N) and connect them according to the wiring diagram provided with the product packaging.
2. Connect the load wires for Channel 1 and Channel 2 to their respective output terminals.
3. Bincika duk haɗin kai sau biyu don tsaro da daidaito kafin maido da wuta.

Refer to the detailed wiring diagram included in the product packaging for specific terminal assignments.

5. Umarnin Aiki

After successful installation and power-up, the device will display the current time or a default setting. Use the buttons on the right side of the unit to navigate menus and set parameters.

5.1 Saitin Lokaci da Kwanan Wata na Farko

1. Danna maɓallin MENU button (if available, or the primary setting button) to enter the settings mode.
2. Kewaya zuwa LOKACI / RANA saitin amfani da Sama/KASA maɓalli.
3. Adjust the hour, minute, day, month, and year using the +/- or Sama/KASA maɓalli.
4. Confirm each setting with the SHIGA or OK maballin.

5.2 Shirye-shiryen Zagaye-zagaye na Kunnawa/Kashewa

The GW30411 allows you to set specific ON/OFF times for each of its two channels.

1. Shigar da yanayin shirye-shirye ta latsa maɓallin PROG maballin.
2. Select the desired channel (Channel 1 or Channel 2).
3. Saita abin da ake so ON time (hour and minute) for the first event.
4. Saita abin da ake so KASHE time (hour and minute) for the first event.
5. Specify the days of the week for which the program should be active.
6. Save the program and exit programming mode.

5.3 Sauke Manual

To temporarily override the programmed schedule, use the KASHE/KASHE or MANUAL button. This typically cycles through ON, OFF, and AUTO modes. The display will indicate the current manual status.

6. Kulawa

The Gewiss GW30411 programmer requires minimal maintenance.

• Tsaftacewa: Shafa waje da taushi, bushe bushe. Kada a yi amfani da masu tsabtace abrasive ko kaushi.
• Dubawa: Periodically check for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.

7. Shirya matsala

If you encounter issues with your GW30411 programmer, refer to the following common problems and solutions:

8. Ƙayyadaddun bayanai

• Alamar: Gewiss
• Samfura: GW30411
• Nau'in: Electronic 2-Channel Programmer
• Mai ƙira: GEWISS
• ASIN: B00OM8R0GS
• Availability of Spare Parts: Babu bayanin
• Ƙaddamar da Sabunta Software Har zuwa: Babu bayani
• Date Listed on Amazon.com.be: Mayu 20, 2022

9. Garanti da Tallafawa

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Gewiss products are designed for reliability and performance.

If you require technical assistance or have questions not covered in this manual, please contact Gewiss customer support or your authorized distributor. Ensure you have your product model number (GW30411) and purchase details ready.