Defiant 270 Degree Black Replacement Outdoor Motion Sensor Instruction Manual

1. Samfurin Ya Ƙareview

The Defiant DF-5716-BK is a 270-degree black replacement outdoor motion sensor designed to enhance security and convenience for outdoor lighting systems. This sensor detects motion within its specified range and activates connected lights, providing illumination when needed. It is suitable for various outdoor applications, including gardens, terraces, and walkways, and is compatible with Heath Zenith Par Lights.

Image 1: Defiant DF-5716-BK 270 Degree Black Replacement Outdoor Motion Sensor. This image displays the compact, black-colored motion sensor unit with its distinctive curved detection lens and adjustable mounting base.

2. Bayanin Tsaro

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• GARGADI: Hatsarin Hatsarin Lantarki. Cire wutar lantarki daga wurin da ke karya da'ira ko akwatin fis kafin shigarwa ko gyarawa.
• Tabbatar an yi duk hanyoyin haɗin lantarki bisa ga ƙa'idodi da ƙa'idodi na gida.
• This product is designed for outdoor use and is waterproof. However, ensure proper sealing during installation to maintain its integrity.
• Do not attempt to modify or repair the sensor. Refer all servicing to qualified personnel.
• Ajiye kayan tattarawa daga yara.

3. Abubuwan Kunshin

Tabbatar cewa duk abubuwan da aka gyara suna nan kafin fara shigarwa:

• Defiant 270 Degree Replacement Motion Sensor (Model DF-5716-BK)
• Mounting hardware (typically screws and wire nuts)
• Manual Umarni (wannan takarda)

4. Ƙayyadaddun bayanai

5. Shigarwa

This section provides general guidelines for replacing an existing motion sensor. Specific wiring diagrams may vary; always consult the original fixture's instructions or a qualified electrician if unsure.

1. Kashe Wuta: Locate the circuit breaker or fuse that supplies power to the outdoor light fixture and turn it OFF. Verify power is off using a voltage gwajin.
2. Cire Tsohon Sensor: Carefully disconnect the wiring from the old motion sensor. Note the wire connections (typically Line, Load, and Neutral/Ground).
3. Shirya Sabon Sensor: Thread the wires from the new Defiant motion sensor through the mounting plate or fixture opening.
4. Haɗin Waya:
   • Haɗa da baƙin waya daga firikwensin zuwa ga waya baƙi (mai zafi) daga wutar lantarki.
   • Haɗa da jan waya daga firikwensin zuwa ga black (load) wire na hasken wuta.
   • Haɗa da farar waya daga firikwensin zuwa ga waya fari (tsaka tsaki) from the power supply and the light fixture.
   • Haɗa da ƙasa waya (bare copper or green) from the sensor to the fixture's ground wire and the house ground wire.

   Kiyaye duk haɗin kai tare da goro na waya da tef ɗin lantarki.

5. Dutsen Sensor: Securely attach the new motion sensor to the fixture or mounting box using the provided hardware. Ensure it is oriented correctly for optimal detection.
6. Hatimin Haɗin kai: Apply weather-resistant sealant around the mounting base to prevent water intrusion, especially if exposed to direct weather.
7. Dawo da Power: Kunna wutar lantarki a wurin na'urar busar da wutar lantarki.

6. Saita da Daidaitawa

After installation, adjust the sensor's settings for optimal performance.

• Yanayin Gwaji: Most motion sensors have a test mode. Upon initial power-up, the sensor may enter a test mode where lights turn on for a short period (e.g., 5-10 seconds) with each detection, regardless of ambient light. This allows for quick aiming and sensitivity testing.
• Daidaita Hankali: Use the sensitivity dial (if present) to adjust how easily the sensor detects motion.
  • Turn clockwise for higher sensitivity (detects smaller movements or at greater distances).
  • Turn counter-clockwise for lower sensitivity (reduces false triggers from small animals or distant objects).
• Daidaita Lokaci: Use the time dial (if present) to set how long the light remains on after motion is no longer detected. Common settings range from a few seconds to several minutes.
• Light Level (Dusk-to-Dawn) Adjustment: Some sensors include a photocell adjustment to determine the ambient light level at which the sensor becomes active. This prevents the light from turning on during daylight hours.
• Aiming the Sensor: Physically adjust the sensor head to cover the desired detection area. Walk through the intended detection zone to verify coverage and make fine adjustments.

7. Umarnin Aiki

Once installed and adjusted, the Defiant motion sensor operates automatically:

• During nighttime (or when ambient light is below the set threshold), the sensor will detect motion within its 270-degree, 100-foot range.
• Upon detection, the connected light fixture will illuminate for the duration set by the time adjustment dial.
• If motion continues to be detected, the light will remain on or reset its timer.
• After motion ceases and the set time expires, the light will turn off.
• During daylight hours (or when ambient light is above the set threshold), the sensor will typically remain inactive, conserving energy.

8. Kulawa

The Defiant motion sensor requires minimal maintenance to ensure continued performance.

• Tsaftacewa: A goge ruwan tabarau na firikwensin lokaci-lokaci da laushi, damp cloth to remove dust, dirt, or debris that may obstruct its view. Kada a yi amfani da masu tsabtace abrasive ko kaushi.
• Dubawa: Annually inspect the sensor and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
• Hanyoyi: Keep the detection area clear of growing foliage, branches, or other objects that could block the sensor's view or cause false triggers.

9. Shirya matsala

If your motion sensor is not functioning as expected, try the following steps:

10. Garanti da Tallafawa

This Defiant motion sensor comes with a Garanti mai iyaka na shekara 1 daga ranar sayayya. Wannan garantin yana ɗaukar lahani a cikin kayan aiki da aiki ƙarƙashin amfani na yau da kullun.

For warranty claims, technical assistance, or further inquiries, please contact Defiant customer support. Keep your proof of purchase for warranty validation.

Contact information for Defiant customer support can typically be found on the product packaging or the official Defiant website.