1. Gabatarwa
This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your Scheppach MIX180 Concrete Mixer. Please read these instructions carefully before using the machine to ensure proper function and to prevent injury or damage.
Hoto na 1.1: Cikakke view of the Scheppach MIX180 concrete mixer, showing its blue drum, motor housing, frame, and wheels.
2. Muhimman Umarnin Tsaro
Kullum a kiyaye ƙa'idodin tsaro na asali don rage haɗarin gobara, girgizar lantarki, da raunin mutum. A ajiye wannan littafin don amfani a nan gaba.
2.1 Gabaɗaya Tsaro
- Karanta duk umarnin: Familiarize yourself with the controls and proper use of the equipment.
- Saka kayan kariya masu dacewa (PPE): This includes safety glasses, hearing protection, gloves, and sturdy footwear.
- Tsaftace wurin aiki da haske mai kyau: Wurare masu duhu ko duhu suna kiran haɗari.
- Kada ku yi aiki a cikin yanayi masu fashewa: Do not use the mixer in the presence of flammable liquids, gases, or dust.
- A nisantar da yara da masu kallo: Hankali na iya sa ka rasa iko.
- Secure the mixer: Ensure the mixer is on a stable, level surface before operation to prevent tipping.
2.2 Tsaron Wutar Lantarki
- Umarnin ƙasa: The mixer must be properly grounded. Consult a qualified electrician if you are unsure.
- Avoid body contact with grounded surfaces: Such as pipes, radiators, ranges, and refrigerators.
- Do not expose to rain or wet conditions: Water entering the mixer will increase the risk of electric shock.
- Kada ku zagi igiyar: Never use the cord for carrying, pulling, or unplugging the mixer. Keep cord away from heat, oil, sharp edges, or moving parts.
- Use an appropriate extension cord: If an extension cord is necessary, ensure it is rated for outdoor use and has the correct gauge for the mixer's power requirements.
3. Abubuwan da aka gyara da Majalisar
The Scheppach MIX180 concrete mixer requires assembly. It is recommended to have two people for assembly due to the weight and size of components. Refer to the included assembly diagram for detailed steps.
3.1 Cire kaya da dubawa
- A hankali cire duk abubuwan da aka gyara daga marufi.
- Inspect all parts for damage. If any parts are damaged or missing, do not proceed with assembly. Contact customer support.
- Verify all parts against the parts list provided in the separate assembly guide.
3.2 Assembly Steps (General)
While specific steps are in the dedicated assembly guide, general assembly involves:
- Attaching the support frame and legs.
- Mounting the wheels to the frame.
- Assembling the drum halves and attaching them to the main shaft.
- Installing the mixing paddles inside the drum.
- Mounting the motor unit and electrical components.
- Attaching the tilting wheel/handle.
Note: Ensure all bolts and fasteners are securely tightened after assembly. Periodically check tightness during use.
4. Aiki
4.1 Pre-Operation Checks
- Ensure the mixer is on a firm, level surface.
- Check that all electrical connections are secure and the power cord is undamaged.
- Verify that the drum is clean and free of debris from previous use.
- Confirm that the tilting mechanism operates smoothly.
4.2 Tsarin Haɗawa
- Matsayi: Place the mixer in a suitable location, ensuring adequate space for loading and unloading.
- Kunna Wuta: Plug the mixer into a suitable power outlet and switch it on. The drum should begin to rotate.
- Kayayyakin Lodawa: With the drum rotating, gradually add the required ingredients (water, cement, sand, aggregate) in the recommended order for your mix. Typically, a small amount of water is added first, followed by cement, then sand and aggregate, with the remaining water added as needed.
Image 4.1: An operator wearing safety gear uses a shovel to load dry materials into the rotating drum of the concrete mixer.
- Hadawa: Allow the materials to mix thoroughly until a consistent, lump-free concrete or mortar is achieved. The internal paddles ensure effective blending.
Hoto 4.2: Kusanci view inside the blue mixer drum, showing the internal paddles actively mixing concrete with small stones and cement.
- Ana saukewa: Once mixed, use the tilting wheel to carefully tilt the drum and discharge the concrete into a wheelbarrow or other suitable container.
Image 4.3: An operator tilts the mixer drum using the large black wheel, allowing freshly mixed concrete to pour into a wheelbarrow positioned below.
- Kashe Wuta: After unloading, switch off the mixer and unplug it from the power source.
4.3 Mixing Tips
- Do not overload the mixer beyond its 180L capacity. Overloading can strain the motor and reduce mixing efficiency.
- For optimal mixing, ensure the drum is rotating before adding materials.
- Adjust the drum angle for best mixing results and ease of loading/unloading.
5. Kulawa da Tsaftacewa
Regular maintenance and cleaning will extend the life of your concrete mixer and ensure safe operation.
5.1 Bayan Kowane Amfani
- Tsaftace ganguna: Immediately after use, clean the inside of the drum to prevent concrete from hardening. Add water and some gravel to the drum and let it mix for a few minutes, then discharge and rinse thoroughly.
- Tsaftace waje: Wipe down the exterior of the mixer, especially the motor housing, to remove any splashes or dust. Ensure the motor's cooling vents are clear.
- Duba igiyar wutar lantarki: Check the power cord for any cuts, abrasions, or damage.
5.2 Kulawa na lokaci-lokaci
- Lubrication: Periodically lubricate moving parts, such as the tilting mechanism and drum bearings, according to the manufacturer's recommendations (refer to the full manual if available).
- Fastener check: Regularly check all bolts and fasteners for tightness and re-tighten as necessary.
- Gear inspection: Inspect the cast iron gears for wear or damage.
5.3 Adana
Store the mixer in a dry, protected area when not in use. If storing outdoors, cover it to protect it from weather elements.
6. Shirya matsala
This section addresses common issues you might encounter with your Scheppach MIX180 concrete mixer.
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Mai haɗa kayan haɗin ba ya farawa | Babu wutar lantarki Maɓallin wuta mara kyau Motor overload protection tripped | Duba haɗin wutar lantarki da na'urar fashewa ta da'ira Inspect power switch for damage; contact service if faulty Allow motor to cool; reduce load |
| Drum does not rotate smoothly or makes unusual noise | Yawaita kaya Girgizar kasa Sako da fasteners Debris in drum mechanism | Reduce amount of material Inspect and replace worn gears if necessary Check and tighten all bolts and fasteners Clean drum and surrounding mechanism thoroughly |
| Mixer rocks or is unstable during operation | Rashin daidaituwa Loose frame connections Yawaita kaya | Place mixer on a firm, level surface Check and tighten all frame bolts Reduce material load to within capacity |
| Concrete sticks inside drum | Insufficient cleaning after previous use Mix too dry | Clean drum immediately after each use Adjust water content for proper consistency |
If you encounter problems not listed here or if solutions do not resolve the issue, contact Scheppach customer support.
7. Bayanan fasaha
| Siffar | Ƙayyadaddun bayanai |
|---|---|
| Alamar | Shiryawa |
| Samfura | MIX 180 |
| Lambar Samfuran Mai ƙira | 5908406901 |
| Ƙarfi | 650 Watts |
| Voltage | 230 Volts |
| Iya Drum | 180 lita |
| Gudun Juyawa | 29.5 min-1 |
| Girman samfur (L x W x H) | 127 x 85 x 135 cm |
| Nauyi | 56 kilogiram |
| Kayan Gear | Bakin Karfe |
8. Garanti da Abokin ciniki Support
For warranty information, please refer to the warranty card included with your product or visit the official Scheppach website. Ajiye shaidar siyan ku don kowane da'awar garanti.
If you require technical assistance, spare parts, or have questions regarding your Scheppach MIX180 concrete mixer, please contact Scheppach customer support. Contact details can typically be found on the manufacturer's webshafin ko a cikin marufi na samfur.
