Gabatarwa
The Intermec PB51 is a rugged, 4-inch direct thermal mobile receipt printer designed for demanding field service, route accounting, and point-of-service applications. It offers fast, reliable printing performance to enhance productivity for mobile workers.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB51 printer.
Hoto 1: Gaba view of the Intermec PB51 mobile receipt printer. A receipt is partially ejected from the front slot, displaying "Transaction Receipt", "Transaction #: 4530902261009", "Customer #: 057-806-730", and "Date: 2/26/2009 Time: 12:08:43 PM". The printer features a dark gray casing with a blue button on the left side and the "Intermec PB51" logo on the top panel.
Saita
1. Cire kaya da dubawa
- A hankali cire firinta da duk na'urorin haɗi daga marufi.
- Tabbatar cewa duk abubuwan da aka jera a cikin takardar tattarawa suna nan.
- Inspect the printer for any visible damage. If damage is found, contact your supplier immediately.
2. Shigar da Batir da Caji
- Tabbatar an kashe firinta.
- Locate the battery compartment on the printer.
- Insert the battery, ensuring proper alignment with the contacts.
- Rufe sashin baturin amintacce.
- Connect the AC adapter to the printer and a power outlet. The battery indicator light will show charging status. Allow the battery to fully charge before first use.
3. Loading Thermal Takarda
- Bude murfin sashin takarda.
- Insert the thermal paper roll with the print-side facing the print head.
- Pull a small amount of paper out past the print mechanism.
- Close the paper compartment cover firmly until it latches.
- The printer's paper sensors will detect the paper, minimizing lost transactions.
4. Connectivity Setup (Bluetooth / USB / Serial)
- Bluetooth: Turn on the printer and enable Bluetooth on your host device (e.g., smartphone, tablet, or computer). Bincika available devices and select the PB51. Pair using the default PIN (refer to the printer's display or documentation for the specific PIN).
- USB: Connect the printer to your host device using a standard USB cable. Install the necessary printer drivers on your host device if prompted.
- Serial: Connect the printer to your host device using a serial cable. Configure the serial port settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
Umarnin Aiki
1. Kunnawa / Kashewa
- Don kunnawa, danna ka riƙe maɓallin wuta har sai nuni ya haskaka.
- To power off, press and hold the power button until the display indicates shutdown, then release.
2. Printing a Receipt
- Ensure the printer is powered on and connected to your host device.
- Open the application on your host device that generates receipts or invoices.
- Initiate the print command from your application. The PB51 is designed for 20-30% faster time-to-receipt printing.
- The printer will automatically feed and print the receipt.
- Tear off the receipt along the serrated edge.
3. Amfani da Allon LCD
The standard LCD display provides important information about the printer's status, battery level, connectivity, and error messages. Use the navigation buttons (if present) to scroll through menu options and settings.
Kulawa
1. Tsabtace Shugaban Buga
- Power off the printer and disconnect it from any power source.
- Bude sashin takarda.
- Gently wipe the print head surface with a lint-free cloth damptare da isopropyl barasa.
- Bada shugaban buga ya bushe gaba ɗaya kafin rufe murfin da kunna firinta.
- Perform this cleaning regularly, especially if print quality degrades.
2. Kula da baturi
- Don haɓaka rayuwar baturi, kauce wa cikar cajin baturi akai-akai.
- Store the printer and battery in a cool, dry place when not in use for extended periods.
- Use only genuine Intermec replacement batteries.
3. Tsabtace Gabaɗaya
Goge wajen firinta da taushi, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquid enters the printer's openings.
Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Printer baya kunnawa | Low or dead battery; faulty power adapter; loose battery connection. | Charge the battery; check power adapter connection; re-seat the battery. |
| No print output | No paper; paper loaded incorrectly; connectivity issue; print head dirty. | Load paper correctly; check Bluetooth/USB/Serial connection; clean print head. |
| Rashin ingancin bugawa | Dirty print head; incorrect paper type; low battery. | Clean print head; ensure thermal paper is used; charge battery. |
| Matsalolin haɗin kai | Incorrect pairing; driver issues; out of range. | Re-pair Bluetooth; reinstall drivers; move closer to host device. |
If the problem persists after attempting these solutions, please contact Intermec customer support.
Ƙayyadaddun bayanai
| Siffar | Daki-daki |
|---|---|
| Sunan Samfura | PB51B33004100 |
| Fasahar Bugawa | Kai tsaye Thermal |
| Fitar da firinta | Monochrome |
| Matsakaicin Girman Mai jarida | 4 inci |
| Fasahar Haɗuwa | USB, Serial, Bluetooth |
| Nauyin Abu | 42 Ounces (approx. 2.63 lbs) |
| Girman Kunshin | 10.2 x 10 x 5 inci |
| Nau'in Mai Gudanarwa | Android (mai jituwa) |
| Mai ƙira | Intermec |
Garanti da Taimako
Specific warranty information for the Intermec PB51 printer is not available in this document. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) website don cikakken garanti sharuɗɗa da sharuɗɗa.
For technical support, service, or to purchase accessories, please contact your authorized Intermec/Honeywell dealer or visit their official support portal.
