Gabatarwa
This manual provides comprehensive instructions for the safe and proper installation and operation of your SANUS VLT6-B1 Premium Tilting TV Wall Mount. This mount is designed to securely hold flat-panel televisions ranging from 46 to 90 inches and weighing up to 150 lbs. Please read all instructions carefully before beginning installation.
Bayanin Tsaro
- Yawan Nauyi: Kada ku wuce matsakaicin ƙarfin nauyi na 150 lbs (68 kg).
- Girman TV: Ensure your TV's screen size is between 46 and 90 inches.
- Nau'in bango: This mount is designed for installation on wood studs (16-24 inch on-center) or solid concrete/concrete block walls. Do not install on drywall alone.
- Kayan aiki: Use appropriate tools and follow all safety precautions for power tools.
- Taimako: Two people are recommended for safe installation, especially when lifting the TV.
- Na'urar USB: Ensure all cables are routed safely and do not interfere with the mount's movement.
Abubuwan Kunshin
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact customer support.
Hoto: All-inclusive hardware and mount components for the SANUS VLT6-B1.
- Taro na Farantin Bango
- Bakan na TV (2)
- Kayan Aikin Haɗawa (sukurori daban-daban, wanki, na'urorin ɗiban sarari don TV da bango)
- Samfuri na Matsa
- Matsayin Kumfa Magnetic
- Jagoran Jagora
Saita da Shigarwa
Installation typically takes around 30 minutes. Follow these steps for a secure setup.
Bidiyo: Official SANUS video demonstrating the installation process for the Premium Tilting TV Mount.
- Pre-Shigar:
- Determine the desired TV height and location on the wall.
- Locate wall studs using a stud finder or ensure the concrete wall is suitable.
- Use the provided drill template to mark pilot hole locations.
- Amintaccen Farantin bango:
Hoto: Visual guide for DIY-friendly installation, including securing the wall plate to studs or concrete.
- Hana ramukan matukin jirgi a wuraren da aka yiwa alama.
- Attach the wall plate securely to the wall using the appropriate hardware for your wall type. The open wall plate design allows mounting over electrical outlets.
- Haɗa Brackets TV:
- A hankali ka sanya fuskar talabijin ɗinka a kan wani wuri mai laushi da tsafta.
- Attach the two TV brackets to the back of your TV using the correct screws, washers, and spacers from the hardware kit. Ensure they are tightened securely.
- Dutsen TV zuwa Farantin bango:
- With assistance, carefully lift the TV and hook the attached brackets onto the wall plate.
- Ensure the TV is properly seated and locked into place.
- Use the leveling and centering features to fine-tune the TV's position even after it's on the wall.
- Na'urar USB:
- Route all necessary cables through the integrated cable management channels on the mount arms.
- The 5.7-inch extension provides ample space for easy cable access and routing.
Umarnin Aiki
The SANUS VLT6-B1 mount offers flexible viewzabin:
Hoto: Illustration of the 12-degree tilt feature for glare reduction and optimal viewing.
- Karkatarwa: The mount features 12 degrees of advanced tilt. This is ideal for reducing glare from windows or lights, especially when the TV is mounted above eye level (e.g., above a fireplace). Adjust the tilt by gently pushing or pulling the top or bottom of the TV.
- Tsawo: The mount extends 5.7 inches from the wall. This extension allows for maximum tilt range and provides easy access to cables behind the TV. When not needed, the TV can be effortlessly pushed back closer to the wall for a low-profile bayyanar.
- Leveling and Centering: After installation, the TV can be height-adjusted and leveled to fine-tune your view, even if wall studs are off-center.
Kulawa
- Tsaftacewa: Tsaftace dutsen tare da laushi, bushe bushe. Kauce wa masu goge goge ko kaushi.
- Dubawa na lokaci-lokaci: Lokaci-lokaci bincika duk sukurori da haɗin kai don tabbatar da sun kasance amintacce.
- Motsi: If the mount's movement becomes stiff, apply a small amount of silicone-based lubricant to the moving parts.
Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| TV ba ta da tsari | Ƙananan kuskuren daidaitawa yayin shigarwa. | Use the post-installation leveling adjustment feature to correct. |
| Dutsen yana jin sako-sako | Screws may have loosened over time. | Retighten all mounting screws on the wall plate and TV brackets. |
| Difficulty tilting/extending | Mechanism may be stiff or cables are interfering. | Check for cable interference. Apply silicone lubricant to moving joints if needed. |
| Cannot attach TV to wall plate | TV brackets not correctly aligned or installed. | Ensure TV brackets are installed according to VESA pattern and are not obstructed. |
Ƙayyadaddun bayanai
- Lambar Samfura: Saukewa: VLT6-B1
- Alamar: Sanus
- Abu: Alloy Karfe
- Launi: Baki
- Nau'in hawa: Dutsen bango
- Nau'in Motsi: karkata
- Na'urori masu jituwa: Talabijin
- Daidaita Girman TV: 46" - 90"
- Yawan Nauyi: Har zuwa lbs 150 (68 kg)
- Matsakaicin Kwangilar karkatar da hankali: 12 Digiri
- Tsawo daga bango: 5.7 inci
- Tsarin VESA: 200x100 through 690x415
- Girman samfur: 32.5 x 10.9 x 3 inci
- Nauyin Abu: 0.01 oz
- UPC: 793795530936
Garanti da Taimako
The SANUS VLT6-B1 Premium Tilting TV Wall Mount comes with a 5-year warranty.
For any questions or assistance with installation, please contact SANUS's US-based customer care team. Our experts are available 7 days a week to provide support.
Bayanin hulda: Refer to the product packaging or the official SANUS website for the most current customer support details.
