Jagorar Mai Amfani da Agogon Ƙararrawa Mai Sarrafawa ta Technoline WT 235

1. Gabatarwa

This manual provides comprehensive instructions for the Technoline WT 235 Radio-Controlled Alarm Clock. Please read this manual carefully before using the device to ensure proper operation and to understand all features. Keep this manual for future reference.

Abubuwan Kunshin

• Technoline WT 235 Radio-Controlled Alarm Clock
• Manual mai amfani
• Lura: 2x AAA Micro LR03 batteries are not included and must be purchased separately.

2. Samfurin Ya Ƙareview

The Technoline WT 235 is a compact and modern radio-controlled alarm clock designed for clear readability and ease of use. It features a large digital display and intuitive controls.

Gaba View da Nuni

Hoto 2.1: Gaba view of the Technoline WT 235 displaying the current time, date, day of the week, and indoor temperature. The radio signal icon is visible, indicating successful synchronization.

Nunin yana nuna bayanan masu zuwa:

• Lokaci: Current time in 12-hour or 24-hour format.
• Kwanan wata: Day and month.
• Ranar Mako: Abbreviated day of the week.
• Zazzabi na cikin gida: Yanayin dakin na yanzu.
• DCF-77 Radio Signal Icon: Indicates reception status of the radio-controlled time signal.
• Alamar ƙararrawa: Indicates if the alarm is active.
• Alamar PM: For 12-hour time format.

Buttons da Sarrafa

Hoto 2.2: Dalla-dalla view of the Technoline WT 235, highlighting the display sections and control buttons.

The device features the following control buttons located on the front bottom:

• Button LOKACI: Used to enter time setting mode and adjust time-related parameters.
• Maɓallin ƙararrawa: Used to enter alarm setting mode and activate/deactivate the alarm.
• Maɓallin '+': Used to increase values during setting or to toggle display modes.
• Maɓallin '-': Used to decrease values during setting or to toggle display modes.

The top surface of the alarm clock functions as a Shigar Sensor for activating the backlight and snooze function.

Girma

Hoto 2.3: Dimensions of the Technoline WT 235 alarm clock.

The compact design measures approximately 80 x 80 x 30 mm (Width x Height x Depth).

3. Saita

3.1 Shigar da Baturi

1. Open the battery compartment cover on the back of the alarm clock.
2. Insert two (2) AAA Micro LR03 batteries, observing the correct polarity (+ and - markings).
3. Rufe murfin ɗakin baturi amintacce.

Upon battery insertion, the alarm clock will power on and automatically begin searching for the DCF-77 radio signal.

3.2 Automatic Time Synchronization (DCF-77)

The Technoline WT 235 is a radio-controlled clock, meaning it automatically synchronizes its time with the DCF-77 signal broadcast from Mainflingen, Germany. This ensures highly accurate timekeeping.

• After battery installation, the clock will automatically attempt to receive the DCF-77 signal. This process may take several minutes.
• A radio signal icon will flash on the display during signal reception. Once the signal is successfully received and synchronized, the icon will appear solid.
• For optimal reception, place the alarm clock away from electronic devices that may cause interference (e.g., TVs, computers, mobile phones) and near a window.

3.3 Manual Time Setting (if needed)

If the radio signal cannot be received or if you are outside the DCF-77 reception area, you can set the time manually.

1. Latsa ka riƙe LOKACI button for approximately 3 seconds to enter manual time setting mode. The hour digits will flash.
2. Yi amfani da '+' or '-' maɓalli don daidaita sa'a.
3. Danna maɓallin LOKACI sake danna maɓallin don tabbatar da sa'ar kuma matsa zuwa saitin minti. Lambobin minti zasu yi walƙiya.
4. Yi amfani da '+' or '-' maɓalli don daidaita mintuna.
5. Danna maɓallin LOKACI button again to confirm the minutes and exit time setting mode.

3.4 Saitin Yankin Lokaci

The clock allows for a time zone offset of ±12 hours from the DCF-77 signal.

1. A cikin yanayin nuni na al'ada, danna maɓallin LOKACI button once. The time zone offset will be displayed (e.g., '00' for no offset).
2. Yi amfani da '+' or '-' buttons to adjust the time zone offset. Each press changes the offset by one hour.
3. Danna maɓallin LOKACI button again to confirm the setting and return to normal display.

4. Umarnin Aiki

4.1 Yanayin Nuni

The clock cycles through different display modes for time, date, and temperature.

• In normal display mode, the time, date, day of the week, and indoor temperature are shown simultaneously.
• Danna maɓallin '+' button to toggle between 12-hour and 24-hour time formats.

4.2 Saitin Ƙararrawa

1. Latsa ka riƙe Ƙararrawa button for approximately 3 seconds to enter alarm setting mode. The alarm hour digits will flash.
2. Yi amfani da '+' or '-' maɓalli don daidaita sa'ar ƙararrawa.
3. Danna maɓallin Ƙararrawa button again to confirm the hour and move to minute setting. The alarm minute digits will flash.
4. Yi amfani da '+' or '-' maɓalli don daidaita mintunan ƙararrawa.
5. Danna maɓallin Ƙararrawa button again to confirm the alarm time and exit setting mode.

4.3 Kunna/Kashe Ƙararrawa

1. A cikin yanayin nuni na al'ada, danna maɓallin Ƙararrawa button once. The alarm icon will appear on the display, indicating the alarm is active.
2. Danna maɓallin Ƙararrawa button again to deactivate the alarm. The alarm icon will disappear.

4.4 Aikin Snooze

When the alarm sounds, gently touch the top surface of the alarm clock (the touch sensor) to activate the snooze function.

• Ƙararrawar za ta tsaya na kimanin minti 5 sannan ta sake yin ƙara.
• You can repeat the snooze function multiple times.
• To stop the alarm completely, press any button on the front of the clock (LOKACI, Ƙararrawa, '+', ko '-').

4.5 Hasken baya

To temporarily illuminate the display, gently touch the top surface of the alarm clock (the touch sensor).

• The backlight will activate for a few seconds, making the display visible in low light conditions.
• This function is separate from the snooze function, though both are activated by the same touch sensor.

5. Kulawa

5.1 Tsaftacewa

• Clean the alarm clock with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the casing ko nuni.
• Avoid getting moisture into the device.

5.2 Sauya Baturi

• When the display becomes dim or the functions are erratic, it is time to replace the batteries.
• Replace both AAA batteries simultaneously with new ones. Do not mix old and new batteries.
• Zubar da batura masu amfani bisa ga ƙa'idodin gida.

6. Shirya matsala

7. Ƙayyadaddun bayanai

• Samfura: Technoline WT 235
• Nau'in: Radio-Controlled Alarm Clock (DCF-77)
• Nunawa: LCD dijital
• Tsarin lokaci: 12/24 hours za a iya zaba
• Siffofin: Alarm with Snooze, Backlight (touch sensor activated), Date Display, Day of Week Display, Indoor Temperature Display, Time Zone Setting (±12h)
• Abu: Filastik
• Launi: Azurfa
• Girma (L x W x H): 80 x 25 x 80 mm (kimanin 3.15 x 0.98 x 3.15 inci)
• Nauyi: 90 g (kimanin 3.17 oz)
• Tushen wutar lantarki: 2 x AAA Micro LR03 batteries (not included)
• Amfani na cikin gida/waje: Cikin gida

8. Garanti da Tallafawa

Technoline products are manufactured with quality and care. This product comes with a standard manufacturer's warranty, typically 1 year from the date of purchase. Please retain your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact your retailer or visit the official Technoline website don bayanin lamba.