Vigor Greenline TB-12 Lithium 12V Cordless Drill User Manual

Gabatarwa

This manual provides essential information for the safe and effective use of your Vigor Greenline TB-12 Lithium 12V Cordless Drill. Please read these instructions carefully before operating the tool and keep them for future reference. Proper use and maintenance will ensure optimal performance and extend the lifespan of your drill.

Umarnin Tsaro

Koyaushe a bi ƙa'idodin tsaro na asali lokacin amfani da kayan aikin lantarki don rage haɗarin gobara, girgizar lantarki, da raunin mutum.

• Saka kayan kariya masu dacewa, gami da kariyan ido da safar hannu.
• Ensure your work area is well-lit and free from clutter.
• Ka nisanta yara da masu kallo yayin aiki da kayan aikin.
• Kada a yi amfani da kayan aikin wuta a cikin abubuwan fashewa, kamar a gaban ruwa mai ƙonewa, gas, ko ƙura.
• Ka guji farawa ba da niyya ba. Tabbatar cewa sauyawa yana cikin wurin kashewa kafin haɗawa da fakitin baturi, ɗauka ko ɗaukar kayan aiki.
• Kar a tilasta kayan aikin wutar lantarki. Yi amfani da madaidaicin kayan aikin wuta don aikace-aikacenku.
• Cire haɗin fakitin baturi daga kayan aikin wuta kafin yin kowane gyare-gyare, canza kayan haɗi, ko adana kayan aikin wuta.
• Ajiye kayan aikin wutar lantarki ta yadda yara ba za su iya isa ba kuma kar a ƙyale mutanen da ba su saba da kayan wutar lantarki ko waɗannan umarnin su yi aiki da kayan wutar lantarki ba.
• Kula da kayan aikin wuta. Bincika rashin daidaituwa ko ɗaure sassa masu motsi, karyewar sassa da kowane yanayin da zai iya shafar aikin kayan aikin wutar lantarki. Idan ya lalace, a gyara kayan aikin wuta kafin amfani.

Samfurin Ƙarsheview

The Vigor Greenline TB-12 is a versatile 12V cordless lithium-ion drill designed for various drilling and screwdriving tasks. It features a compact design, reversible rotation, and an integrated LED light for improved visibility.

Image: The Vigor Greenline TB-12 Lithium 12V Cordless Drill, depicted in its packaging. The drill itself is green and black, highlighting its compact design. Key features such as 12V Lithium-ion battery, 800mAh capacity, 3-5 hour charge time, 0-650 RPM speed, 10Nm torque, 16+1 clutch settings, 10mm chuck, and reversible function are visible on the packaging.

Mabuɗin fasali:

• 12V Lithium-ion Battery: Provides reliable power and longer run-time.
• 800mAh Battery Capacity: Ensures sufficient power for typical tasks.
• 3-5 Hour Charge Time: Allows for quick recharging.
• 0-650 RPM No-Load Speed: Offers variable speed control for different applications.
• 10 Nm Max Torque: Suitable for various drilling and fastening tasks.
• 16+1 Torque Settings: Provides precise control for screwdriving and prevents over-tightening.
• 10mm Keyless Chuck: Allows for quick and easy bit changes.
• Reversible Rotation: Essential for screwdriving and removing fasteners.
• Integrated LED Light: Illuminates the work area for better visibility.

Saita

1. Cajin Baturi

1. Tabbatar da cikakken cajin baturi kafin amfani da farko.
2. Haɗa caja zuwa daidaitaccen tashar wutar lantarki.
3. Insert the battery pack into the charger. The charging indicator light will show the charging status.
4. A full charge typically takes 3-5 hours. Do not overcharge the battery.
5. Once charged, disconnect the charger from the power outlet and remove the battery.

2. Installing/Removing the Battery Pack

• Don shigarwa: Daidaita fakitin batirin da tushen maƙallin haƙa kuma a zame shi har sai ya danna shi cikin aminci.
• To remove: Press the battery release button (if present) and slide the battery pack out of the handle.

3. Installing Drill Bits/Screwdriver Bits

1. Ensure the drill is switched off and the battery is removed for safety.
2. Juya abin wuyan chuck a akasin agogo don buɗe muƙamuƙin chuck.
3. Insert the desired drill bit or screwdriver bit into the chuck, ensuring it is centered.
4. Rotate the chuck collar clockwise to tighten the jaws firmly around the bit. Hand-tighten only; do not use tools to tighten the chuck.
5. To remove a bit, rotate the chuck collar counter-clockwise to loosen the jaws and pull the bit out.

Umarnin Aiki

1. Kunnawa / Kashewa

• To turn on the drill, press the trigger switch. The integrated LED light will illuminate the work area.
• To turn off the drill, release the trigger switch.

2. Daidaita Gudu

The drill features variable speed control. The speed of rotation is controlled by the amount of pressure applied to the trigger switch. Pressing the trigger further increases the speed, up to a maximum of 650 RPM.

3. Setting Torque

The torque adjustment ring allows you to select from 16 torque settings plus a drill mode. Rotate the ring to the desired setting. Lower settings are for screwdriving into softer materials or smaller screws, while higher settings and the drill mode are for drilling or driving larger screws into harder materials.

4. Juyawa Gaba/Juyawa

A forward/reverse selector switch is located above the trigger. Push the switch to the left for forward rotation (for drilling and tightening screws) and to the right for reverse rotation (for loosening screws or removing bits). Ensure the switch is in the center position to lock the trigger and prevent accidental starting.

5. Nasihu kan haƙa da tuƙi

• Always secure your workpiece before drilling or screwdriving.
• A shafa a hankali, daidai gwargwado. Kar a yi amfani da ƙarfin motsa jiki.
• For drilling, start with a slow speed to create a pilot hole, then increase speed as needed.
• For screwdriving, select a torque setting appropriate for the screw size and material to avoid stripping the screw head or damaging the workpiece.

Kulawa

1. Tsaftacewa

• Keep the ventilation openings of the drill clean to prevent overheating.
• Yi amfani da taushi, damp zane don tsaftace wajen kayan aikin. Kada a yi amfani da sinadarai masu ƙarfi ko masu tsaftace goge-goge.
• Never immerse the tool or battery in water.

2. Kula da baturi

• Ajiye batura a wuri mai sanyi, bushewa nesa da hasken rana kai tsaye da matsanancin zafi.
• Do not store batteries in a discharged state for extended periods. Recharge them periodically if not in use.
• If the battery is damaged or no longer holds a charge, dispose of it responsibly according to local regulations.

3. Adana

When not in use, store the drill and its accessories in a secure, dry place, out of reach of children. Remove the battery pack from the drill before storage.

Shirya matsala

• Drill not starting: Check if the battery is fully charged and properly inserted. Ensure the forward/reverse selector is not in the center (locked) position.
• Low power or short run-time: The battery may need recharging or may be nearing the end of its lifespan. Ensure the battery contacts are clean.
• Yin zafi fiye da kima: Ensure the ventilation openings are clear. Avoid continuous heavy-duty use without breaks. If the tool overheats frequently, discontinue use and consult a service professional.
• Bit yana zamewa a cikin chuck: Ensure the chuck is tightened securely around the bit. Check if the bit shank is clean and free of oil or debris.

For issues not covered here, please contact customer support or a qualified service technician.

Ƙayyadaddun bayanai

Garanti da Taimako

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you require technical support or have questions regarding your Vigor Greenline TB-12 Cordless Drill, please reach out to the manufacturer's customer service or the point of purchase.