Jagorar Mai Amfani da Philips myLiving PONGEE LED Spot Light (Model 5058131PN)

1. Gabatarwa

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Bayanin Tsaro

Koyaushe ku kiyaye waɗannan matakan tsaro don hana rauni ko lalacewa:

Tsaron Wutar Lantarki: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
Amfanin Cikin Gida Kawai: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
Nau'in Bulb: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage aka nuna akan madaidaicin.
Gudanarwa: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
Tsaftacewa: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Abubuwan Kunshin

Tabbatar cewa duk abubuwan da aka gyara suna nan kafin fara shigarwa:

Philips myLiving PONGEE LED Spot Light fixture (1 unit)
Kayan aikin hawa (skru, matosai na bango)
Littafin koyarwa

Lura: A GU10 LED bulb is ba a hada kuma dole ne a saya daban.

Packaging box for Philips myLiving PONGEE LED Spot Light

Hoto 2: Kunshin Samfura

4. Saita da Shigarwa

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

Shirya Wurin Shigarwa: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
Cire haɗin Wuta: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
Dutsen Tushen: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
Waya Fixture: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
Sanya kwan fitila: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
Attach the Fixture Body: Secure the main body of the spot light to the mounted base.
Dawo da Power: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Umarnin Aiki

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

Kunna/Kashe: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
Daidaita Hanyar Haske: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Kulawa

Tsaftacewa: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
Sauyawa Bulb:
1. Kashe wutar lantarki a na'urar kashe wutar lantarki.
2. Allow the bulb to cool completely.
3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
5. Maida iko.

7. Shirya matsala

Matsala	Dalili mai yiwuwa	Magani
Haske baya kunnawa	Babu wutar lantarki. Kwan fitilar ta lalace ko kuma ba a shigar da ita daidai ba. Sako da wayoyi.	Bincika mai watsewar kewayawa ko fuse. Ensure the wall switch is ON. Replace the bulb with a new GU10 LED bulb. Consult a qualified electrician to check wiring connections.
Haske flickers.	Haɗin kwan fitila mai santsi. Canjin dimmer mara jituwa (idan an zartar). Kwan fitila mara kyau.	Ensure the bulb is securely twisted into the socket. If using a dimmer, ensure it is compatible with LED bulbs. Sauya kwan fitila.

8. Ƙayyadaddun bayanai

Alamar: Philips Lighting
Lambar Samfura: Saukewa: 5058131PN
Girman Samfura (L x W x H): 10 x 13.8 x 8.2 cm
Nauyin Abu: 345g ku
Abu: Karfe
Launi: Fari
Salo: Na zamani
Nau'in Tushen Haske: LED
Bulb Socket Type: GU10
Yawan kwararan fitila: 1 (ba a haɗa da kwan fitila ba)
Shigar da Voltage: 220-240V
Tushen wutar lantarki: Electrical cable (wired)
Nau'in Shigarwa: Surface Mount (Ceiling/Wall)
Matsayin IP: IP20 (Amfani na cikin gida kawai)
Siffofin Musamman: Energy-efficient, Swivel head
Takamaiman Amfani: Home, Bedroom, Living Room

9. Garanti da Tallafawa

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting webshafin yanar gizo. Hakanan zaka iya tuntuɓar dillalin ku don neman taimako.

Ajiye shaidar siyan ku don kowane da'awar garanti.

Philips Lighting 5058131PN