Gabatarwa
The Apogee MiC Plus is a studio-quality USB microphone designed for pristine sound capture. It features a cardioid condenser mic capsule, a built-in mic pre-amp, and a zero-latency headphone output, making it ideal for recording vocals, podcasts, and instruments on various platforms including macOS, iOS, and Windows.
Figure 1: Apogee MiC Plus with included desktop tripod.
Me ke cikin Akwatin
- Apogee MiC Plus Microphone
- Lightning iOS cable
- Kebul na USB
- Kebul na USB-A
- Desktop Tripod
- Clip Microphone
Figure 2: Contents of the Apogee MiC Plus package.
Saita
Haɗawa zuwa Na'urar ku
- Zaɓi Kebul Na Dama: Select the appropriate cable for your device. Use the Lightning cable for iOS devices, and either the USB-C or USB-A cable for computers (macOS or Windows).
- Connect the MiC Plus: Plug the micro-USB end of the chosen cable into the MiC Plus.
- Haɗa zuwa Na'ura: Plug the other end of the cable into your computer or iOS device.
- Kunna Wuta: The MiC Plus is bus-powered and will power on automatically when connected. The status LED will illuminate.
Figure 3: MiC Plus connected to a laptop for recording.
Kulawa da Kai
The MiC Plus features a powerful headphone output with a blend feature for zero-latency monitoring. This allows you to hear your input signal directly without any delay, which is crucial for accurate recording.
- Haɗa belun kunne: Plug your headphones into the 3.5mm headphone jack on the MiC Plus.
- Adjust Blend: Use the control knob on the MiC Plus to adjust the blend between your input signal (microphone) and playback from your device. This ensures you can monitor your performance clearly.
Figure 4: Close-up of the MiC Plus ports, including the headphone jack.
Operating the MiC Plus
Samun Gudanarwa
The MiC Plus features 46dB of mic preamp gain, digitally controlled for greater precision. This allows you to set the optimal input level for your recordings.
- Daidaita Riba: Use the control knob on the MiC Plus to increase or decrease the microphone's input gain. Monitor the input levels in your recording software to avoid clipping (distortion).
- Aiki na shiru: To mute the microphone, press the control knob in. The status LED will change to indicate mute status.
Figure 5: The control knob on the MiC Plus for gain adjustment and muting.
Recording with "First Take" Application
"First Take" is a free podcast recording application that allows you to connect up to 4 different Apogee mics to a single computer or USB Hub. It simplifies the podcast recording process.
Video 1: Introduction to First Take, demonstrating multi-mic podcast recording with Apogee microphones.
- Install First Take: Download and install the "First Take" application on your compatible computer.
- Connect Microphones: Connect your Apogee MiC Plus (and up to three other compatible Apogee mics) to your computer or a USB hub.
- Launch First Take: Open the application. It will automatically detect connected Apogee microphones.
- Daidaita Matakai: Use the individual faders within the "First Take" interface to set the recording levels for each microphone.
- Fara Rikodi: Click the "REC" button to begin your podcast recording.
- Samun Rikodi: Your recordings will be saved and can be accessed directly from within the "First Take" application.
Figure 6: Multiple MiC Plus units used for a podcast recording session.
Kulawa
- Tsaftacewa: Use a soft, dry cloth to clean the exterior of the MiC Plus. Do not use liquid cleaners or solvents.
- Ajiya: When not in use, store the MiC Plus in a protective case or bag to prevent dust and damage.
- Kulawar Kebul: Handle cables carefully. Avoid sharp bends or kinks that can damage the internal wiring.
Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Babu sauti daga makirufo | Incorrect cable connection, software input not selected, microphone muted, low gain. | Ensure cables are securely connected. Check your recording software's audio input settings to confirm MiC Plus is selected. Press the control knob to unmute. Increase gain. |
| Gurbataccen sauti | Input gain too high (clipping). | Reduce the input gain using the control knob on the MiC Plus or within your recording software. |
| Babu sauti daga belun kunne | Headphones not connected, headphone volume too low, blend knob setting. | Ensure headphones are fully plugged in. Adjust headphone volume on your device or the MiC Plus. Check the blend knob to ensure you are monitoring the correct source. |
| Microphone not recognized by device | Driver issue (Windows), incompatible device, faulty cable. | Try a different USB port or cable. For Windows, ensure drivers are up to date (usually plug-and-play, but check Apogee's website if issues persist). Verify device compatibility. |
Ƙayyadaddun bayanai
- Sunan Samfura: Apogee MiC Plus
- Alamar: Apogee
- Nau'in Makaruho: Condenser na Cardioid
- Tsarin Polar: Unidirectional
- Fasahar Haɗuwa: USB
- Interface Hardware: Kebul na USB 2.0
- Hankalin Sauti: 94db ku
- Alamar siginar-zuwa-Noise Ratio: 46db ku
- Martanin Mitar: 20 Hz - 20 kHz
- Zurfin Ciki/Sampku Rate: Up to 24-bit/96kHz
- Tushen wutar lantarki: Kebul Bus-Powered
- Na'urori masu jituwa: Smartphone, Tablet, macOS (OS X 10.9 or later), Windows (Windows 10)
- Nauyin Abu: 1 fam (kimanin 0.45 kg)
- Girman Samfura (L x W x H): 5.02 x 2.13 x 7.8 inci (kimanin. 12.75 x 5.41 x 19.81 cm)
- Mai ƙira: Abubuwan da aka bayar na Apogee Electronics Corp.
- UPC: 805676302034
Garanti da Taimako
Apogee products are known for their quality and reliability. For detailed warranty information and technical support, please refer to the official Apogee webshafin ko takaddun da aka haɗa tare da samfurin ku.
Hakanan zaka iya samun ƙarin albarkatu da FAQs akan Apogee Store on Amazon ko download da Jagorar Mai Amfani (PDF) don cikakkun bayanai.
For customer service inquiries related to your purchase, please contact the seller, Apogee Electronics Corp., directly through Amazon's platform.
