DS18 PRO-GM6 Loudspeaker Instruction Manual

1. Gabatarwa

Thank you for choosing the DS18 PRO-GM6 6.5-inch Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Bayanin Tsaro

Always observe the following safety precautions when installing and operating your loudspeaker:

• Cire haɗin tashar batirin motar mai kama da na'urar lantarki kafin fara duk wani aiki na lantarki don hana gajerun da'irori.
• Ensure proper wiring and connections. Incorrect wiring can damage the speaker, amplif, ko tsarin lantarki na abin hawa.
• Use appropriate gauge wiring for power and speaker connections.
• Mount the speaker securely to prevent movement during vehicle operation.
• Avoid installing speakers in locations that obstruct vehicle safety features (e.g., airbags).
• Do not operate the audio system at excessively high volumes for prolonged periods, as this can cause hearing damage.
• Tuntuɓi ƙwararren mai sakawa idan ba ka da tabbas game da wani ɓangare na tsarin shigarwa.

3. Abin da ke cikin Akwatin

• DS18 PRO-GM6 Loudspeaker (1 unit)
• Jagoran Jagora

Note: Additional mounting hardware or speaker wire may be required and is not included.

4. Ƙayyadaddun bayanai

Hoto: Gaba view of the DS18 PRO-GM6 loudspeaker with its main technical specifications highlighted.

5. Saita da Shigarwa

Proper installation is crucial for the performance and longevity of your DS18 PRO-GM6 loudspeaker. This section provides general guidelines. Specific vehicle requirements may vary.

5.1 Tsara Shigarwa

• Wuri: Identify suitable mounting locations in your vehicle, typically door panels or custom enclosures. Ensure sufficient mounting depth (2.72 inches / 69mm) and clearance.
• Waya: Shirya hanyar sadarwa ta wayoyin lasifika daga naka amplifier to the speaker locations. Avoid running speaker wires alongside power cables to prevent noise interference.
• AmpMatching mai daidaitawa: The PRO-GM6 has an 8 Ohm impedance and handles 140W RMS. Ensure your amplifier can safely deliver power within these specifications. Connecting an 8 Ohm speaker to a 4 Ohm amplifier output will result in lower power delivery than the amplifier's rated 4 Ohm output.

5.2 Hawan Kakakin Majalisa

Hoto: Side profile of the DS18 PRO-GM6 loudspeaker, illustrating its depth and mounting flange.

1. Shirya Dutsen Sama: If installing in a new location, carefully cut a circular opening with a diameter of 5.70 inches (145mm). Ensure the surface is sturdy and free of obstructions.
2. Matsayin Kakakin Majalisa: Place the speaker into the opening, aligning the mounting holes with the pre-drilled holes or marking new ones.
3. Amintaccen Kakakin Majalisa: Use appropriate screws (not included) to firmly secure the speaker to the mounting surface. Do not overtighten.

5.3 Haɗin Waya

Hoto: Na baya view of the DS18 PRO-GM6 loudspeaker, showing the positive and negative speaker terminals.

1. Gano Tashoshi: The speaker has clearly marked positive (+) and negative (-) terminals.
2. Haɗa Wayoyi: Connect the positive (+) output from your amplifier to the positive (+) terminal on the speaker. Connect the negative (-) output from your amplifier to the negative (-) terminal on the speaker. Maintain correct polarity for all speakers in your system.
3. Amintattun Haɗi: Ensure all connections are tight and free from short circuits.

6. Umarnin Aiki

The DS18 PRO-GM6 is a midrange loudspeaker designed to reproduce frequencies between 98 Hz and 10 KHz. It should be used as part of a complete car audio system, typically paired with subwoofers for low frequencies and tweeters for high frequencies.

• Haɗin Tsari: Connect the PRO-GM6 to an appropriate amptashar ruwa.
• Saitunan Ketare: For optimal sound quality and speaker protection, use an electronic crossover to filter out frequencies below 98 Hz (high-pass filter) and above 10 KHz (low-pass filter). Refer to your amplifier or head unit's manual for crossover adjustments.
• Samun Gyara: Saita amplifier gain correctly to match the output voltage of your head unit. Avoid setting the gain too high, as this can lead to distortion and speaker damage.
• Lokacin ɓata lokaci: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.

7. Kulawa

The DS18 PRO-GM6 loudspeaker requires minimal maintenance:

• Tsaftacewa: Use a soft, dry cloth to wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
• Dubawa: Lokaci-lokaci bincika haɗin lasifikar don matsewa kuma tabbatar da cewa babu wayoyi da suka lalace ko fallasa.
• Kariyar Muhalli: While the speaker features a steel basket, it is not waterproof. Protect it from direct exposure to water and extreme temperatures.

8. Shirya matsala

9. Garanti da Tallafawa

DS18 products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DS18 customer support directly.

Kuna iya samun ƙarin bayani da bayanan tuntuɓar a kan DS18 Official Store on Amazon.