1. Gabatarwa
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Gabaɗaya Umarnin Tsaro
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Tsaron Yankin Aiki: Tsaftace wurin aiki da tsabta da haske. Wurare masu duhu ko duhu suna kiran haɗari. Kada a yi amfani da kayan aikin wuta a cikin abubuwan fashewa, kamar a gaban ruwa mai ƙonewa, gas, ko ƙura.
- Tsaron Wutar Lantarki: Guji cudanya jiki tare da ƙasa ko ƙasa kamar bututu, radiators, jeri, da firiji. Akwai ƙarin haɗarin girgiza wutar lantarki idan jikinka na ƙasa ko ƙasa.
- Tsaro na Keɓaɓɓen: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Amfani da Kulawa: Do not force the power tool. Use the correct power tool for your application. It will do the job better and safer at the rate for which it was designed. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Amfani da Kulawa da Fakitin Baturi: Yi caji kawai tare da caja da mai ƙira ya ƙayyade. Caja wanda ya dace da nau'in fakitin baturi ɗaya na iya haifar da haɗarin wuta lokacin amfani da wata fakitin baturi. Yi amfani da kayan aikin wuta kawai tare da fakitin baturi na musamman.
3. Samfurin Ya Ƙareview da Features
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Babban Fitowar Karfi: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Ikon Saurin Canjin Gudu: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Haɗin Hasken LED: Three power LEDs provide optimal illumination of the work area.
- Tsarin Ergonomic: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Gina Mai Dorewa: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Clip bel: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Saita
4.1 Battery Installation (Battery and Charger Sold Separately)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.
4.2 Bit Insertion and Removal
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Umarnin Aiki
5.1 Kunnawa / Kashewa da Sarrafa Gudu
- Don Fara: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Daidaita Sauri: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Don Tsayawa: Saki mai kunnawa ON/KASHE.
5.2 Alkiblar Juyawa
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Juyawa Gaba (Cikin Ciki): Push the selector switch to the left.
- Juyawa Juya (Mai Tsayawa): Push the selector switch to the right.
- Matsayin Kulle: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Kulawa
Kulawa na yau da kullun yana tabbatar da tsawon rai da mafi kyawun aikin direban tasirin tasirin ku.
- Tsaftacewa: After each use, clean the tool housing with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
- Ajiya: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Dubawa: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Kayan aiki baya farawa. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Rage ƙarfi ko aiki. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Bit baya riƙe amintacce. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Ƙayyadaddun bayanai
| Siffar | Daki-daki |
|---|---|
| Alamar | Einhell |
| Lambar Samfura | TE-CI 18/1 Li Solo (4510034) |
| Tushen wutar lantarki | Battery Powered (18V Power X-Change) |
| Matsakaicin Gudun Juyawa | 2300 RPM |
| Matsakaicin Torque | 140 Newton Mita |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Voltage | 18 Volts |
| Nauyin Abu | Kilogram 1.18 (kilo 2.58) |
| Girman samfur | 7.8"L x 3.03"W x 6.65"H |
| Kayan abu | Rubber, Aluminium |
| Abubuwan da aka haɗa | Akku-Schlagschrauber (Impact Driver Body Only) |
| Batura sun haɗa? | A'a |
| Ana Bukata Batura? | Yes (18V Lithium Ion) |
9. Garanti da Tallafawa
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell website.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
