1. Gabatarwa
This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine SPS-M601W 6.5-inch 2-Way Marine Coaxial Speakers. Designed for marine environments, these speakers offer high-quality audio performance and durability. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
2. Bayanin Tsaro
Observe the following safety precautions to prevent damage to the product or injury to yourself.
- Bayyanar Ruwa: While designed for marine use with IPX5 water resistance, avoid direct high-pressure water jets.
- Haɗin wuta: Ensure all power connections are secure and correctly polarized to prevent electrical shorts or damage.
- hawa: Mount speakers securely to prevent detachment during vessel movement.
- Matakan girma: Prolonged exposure to high volume levels can cause hearing damage.
- Ƙwararren Ƙwararru: If you are unsure about any installation steps, consult a qualified marine audio technician.
3. Saita da Shigarwa
Proper installation is crucial for optimal performance and durability of your marine speakers. This section outlines the general steps for mounting and wiring.
3.1. Cire kaya da dubawa
Carefully remove the speakers from their packaging. Inspect for any signs of damage during transit. Ensure all components are present:
- Alpine SPS-M601W 6.5-inch Marine Coaxial Speakers
- Mounting hardware (screws, clips)
- Gishiri

Image 1: Four Alpine SPS-M601W speakers, illustrating the product's appearance with and without grilles.
3.2. Mounting Location Selection
Choose a mounting location that provides adequate space for the speaker's depth and allows for proper sound dispersion. Ensure the surface is flat and sturdy enough to support the speaker's weight. Consider areas protected from direct, continuous water submersion.

Hoto 2: Side profile of an Alpine SPS-M601W speaker, highlighting its mounting depth and grille design.
3.3. Cutting the Mounting Hole
- Refer to the specifications section for the precise cutout diameter.
- Use a template (often included or available from Alpine) to mark the cutting area.
- Carefully cut the hole using an appropriate tool, ensuring clean edges.
3.4. Haɗin Waya
Connect the speaker wires to your marine audio amplifier or head unit. Observe correct polarity: positive (+) to positive and negative (-) to negative. Incorrect wiring can lead to phase issues and reduced sound quality.
- The speakers have a nominal impedance of 4 Ohms.
- Tabbatar da ku amplifier is stable at a 4 Ohm load.

Hoto 3: Na baya view of the speaker, detailing the wiring terminals and internal components for connection.
3.5. Securing the Speakers
- Place the speaker into the mounting hole.
- Align the mounting holes on the speaker frame with the pre-drilled holes on the mounting surface.
- Secure the speaker using the provided screws. Do not overtighten.
- Attach the grilles by aligning them with the speaker frame and pressing firmly until they click into place or securing with screws if applicable.

Image 4: Two Alpine SPS-M601W speakers with grilles, demonstrating the finished appearance after installation.
4. Aiki
Once installed, your Alpine SPS-M601W speakers are ready for use. They are designed to integrate seamlessly with your existing marine audio system.
- Kunna Wuta: Turn on your marine head unit or ampmai sanyaya wuta.
- Source Audio: Select your desired audio source (radio, Bluetooth, auxiliary input, etc.).
- Daidaita Girma: Gradually increase the volume to a comfortable listening level. Avoid excessively high volumes to prevent distortion and potential speaker damage.
- Saitunan Sauti: Adjust bass, treble, and balance settings on your head unit or amplifier to optimize sound quality according to your preference and the acoustic environment of your vessel.

Hoto 5: Cikakken bayani view of the speaker cone and tweeter, illustrating the 2-way coaxial design.
5. Kulawa da Kulawa
Regular maintenance ensures the longevity and optimal performance of your marine speakers.
- Tsaftacewa: Tsaftace muryoyin lasifika da kewaye da taushi, damp zane. Kauce wa masu goge goge ko kaushi.
- Bayyanar Ruwan Gishiri: After exposure to saltwater, rinse the speakers with fresh water to prevent salt buildup, which can corrode components.
- Kariyar UV: The grilles are UV resistant (rated at ASTM D4329), but prolonged, extreme sun exposure can still affect appearance over time.
- Dubawa: Periodically check wiring connections for corrosion or looseness. Ensure mounting screws remain tight.
6. Shirya matsala
If you experience issues with your Alpine SPS-M601W speakers, refer to the following common problems and solutions:
- Babu Sauti:
- Duba duk hanyoyin haɗin waya don tabbatar da daidaiton polarity da kuma amintaccen hulɗa.
- Tabbatar da amplifier or head unit is powered on and functioning correctly.
- Ensure the audio source is active and volume is turned up.
- Karkataccen Sauti:
- Rage matakin ƙara a kan naúrar kai ko ampmai sanyaya wuta.
- Bincika hanyoyin haɗin waya maras kyau.
- Tabbatar da amplifi ba a wuce gona da iri ko yankewa ba.
- Verify the impedance of the speakers matches the ampiyawar lifi.
- Sauti Mai Tsayi:
- Inspect wiring for loose connections or corrosion.
- Bincika kowane gajeriyar da'irori a cikin wayoyin lasifikar.
- Kakakin Majalisa ɗaya Ba Ya Aiki:
- Swap the non-working speaker with a known working one to determine if the issue is with the speaker or the wiring/amptashar ruwa.
- Duba saitunan ma'auni akan na'urar kai.
7. Ƙayyadaddun bayanai
Detailed technical specifications for the Alpine SPS-M601W 6.5-inch Marine Coaxial Speakers.
| Siffar | Ƙayyadaddun bayanai |
|---|---|
| Sunan Samfura | SPS M601W |
| Nau'in Kakakin | Woofer (Coaxial) |
| Girman Kakakin | Inci 6.5 |
| Kewaye Sauti Kanfigareshan | 2.0 |
| CTA-2031 Speaker Rating | 35W RMS, 110W Peak Power |
| Ƙarƙashin Ƙarƙashin Ƙira | 4 ohm |
| Amsa Mitar | 50-20 kHz |
| Hankali | 89db ku |
| Kimar Ruwa Resistance | IPX5 |
| Resistance UV | ASTM D4329 (Grilles) |
| Salt Spray/Fog Resistance | ASTM B117 |
| Girman samfur | 3 x 3 x 3 inches (approximate, for a single speaker) |
| Nauyin Abu | 11.5 pounds (for the set of 4) |
| UPC | 613815879367 |

Image 6: Rear label of the speaker, displaying the model number SPS-M601W and manufacturing information.
8. Garanti da Tallafawa
For warranty information and technical support, please refer to the official Alpine website or contact Alpine customer service. Keep your purchase receipt as proof of purchase for warranty claims.
Visit the official Alpine Store for more products and support: Alpine Store on Amazon





