Gabatarwa
Thank you for choosing the Aidapt 27W Floor Reading Lamp. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new lamp. Da fatan za a karanta wannan littafin sosai kafin amfani da shi kuma a riƙe shi don tunani na gaba.
Wannan lamp is designed to provide optimal natural daylight (6500K) for various activities, including reading, writing, and creative hobbies. Its adjustable design allows for precise light positioning.
Umarnin Tsaro
- Tabbatar da lamp an sanya shi a kan wani wuri mai santsi, mai faɗi don hana tuɓewa.
- Kada ku bijirar da lamp to water or excessive moisture.
- Only use the specified bulb type (LED, 27W). Refer to the bulb compartment for specific warnings.
- Cire haɗin lamp daga tashar wutar lantarki kafin tsaftacewa ko yin duk wani kulawa.
- Ka kiyaye igiyar wutar lantarki daga tushen zafi da kaifi mai kaifi.
- Kada ka yi ƙoƙarin gyara ko gyara lamp da kanka. Tuntuɓi ma'aikata masu ƙwarewa don yin hidima.
Abubuwan Kunshin
Da fatan za a duba kunshin don abubuwa masu zuwa:
- Karatun bene na Aidapt 27W Lamp (Babban Unit)
- Igiyar wutar lantarki tare da Plug
- Jagorar mai amfani (wannan takaddar)
Saita
- Cire kaya: A hankali cire duk abubuwan da aka gyara daga marufi. Riƙe marufi don jigilar kaya ko ajiya na gaba.
- Majalisar: Lamp typically comes in a few parts. Assemble the base, pole, and lamp head according to the diagrams. Ensure all connections are secure.
- Shigar Bulb: If the bulb is not pre-installed, carefully insert the 27W LED bulb into the socket. Ensure it is firmly seated.
- Wuri: Matsayin lamp on a flat, stable surface near a power outlet. Ensure the power cord is not a tripping hazard.
Image 1: Fully assembled Aidapt 27W Floor Reading Lamp. This image shows the lamp's overall structure, including the stable base, the main pole, the flexible gooseneck, and the lamp head. The power cord is visible at the base.
Hoto 2: Rufewa view daga lamp head's underside, showing the bulb compartment. This image highlights the three fluorescent tubes (or LED equivalents) and the power switch located on the lamp head. A warning label regarding bulb type is also visible.
Umarnin Aiki
- Haɗin Wuta: Toshe lampAn haɗa igiyar wutar lantarki zuwa cikin hanyar wutar lantarki ta AC ta yau da kullun ta 120V.
- Kunna/Kashe: Locate the power switch, typically on the lamp head or pole. Flip the switch to the 'ON' position to illuminate the lamp, and to 'OFF' to turn it off.
- Daidaita Lamp: Lamp features a flexible gooseneck. Gently bend the gooseneck to position the lamp head and direct the light to your desired area. Avoid excessive force when adjusting.
Kulawa
- Tsaftacewa: Cire haɗin lamp from the power supply before cleaning. Wipe the lamp's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Sauyawa Bulb: Tabbatar da lamp is unplugged and the bulb has cooled down before attempting to replace it. Follow the instructions for bulb installation in the 'Setup' section. Only use a 27W LED bulb.
- Ajiya: Idan ana adana lamp for an extended period, unplug it and store it in a cool, dry place, preferably in its original packaging.
Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Lamp baya kunnawa. | Not plugged in; Power switch is off; Faulty bulb; No power at outlet. | Tabbatar lamp is securely plugged in; Flip power switch to ON; Replace bulb; Test outlet with another device. |
| Haske flickers. | Loose bulb; Unstable power supply. | Ensure bulb is tightly screwed in; Try plugging into a different outlet. |
| Lamp ba shi da kwanciyar hankali. | Not assembled correctly; Placed on uneven surface. | Check all assembly connections; Move lamp zuwa lebur, barga. |
Ƙayyadaddun bayanai
- Samfura: Saukewa: VM654
- Alamar: Aidapt
- Ƙarfi: 27 Watts
- Voltage: 120 Volts
- Nau'in Bulb: LED
- Hasken Zazzabi: 6500K (Natural Daylight)
- Abu: Karfe
- Girma (L x W x H): 175 x 34 x 160 cm (kimanin 68.9 x 13.4 x 63 inci)
- Nauyin Abu: Kilogram 3.1 (kimanin lbs 6.83)
- Tushen wutar lantarki: Corded Electric
Garanti da Taimako
For warranty information or technical support, please contact Aidapt customer service. Details can typically be found on the product packaging or the official Aidapt website.
Website: www.aidapt.co.uk
