StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

Samfura: Saukewa: RKCONS1901 | Alamar: StarTech.com

1. Gabatarwa

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. Abin da ke cikin Akwatin

  • KVM Console
  • 6 ft [1.8 m] KVM cable
  • M5 kaji kwayoyi
  • M5 sukurori

3. Saita da Shigarwa

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 Rack hawa

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 Haɗin igiyoyi

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
Na baya view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

Hoto 2: Na baya view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. Umarnin Aiki

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 Amfani da Allon Madannai da Taɓawa

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 OSD Menu Kewayawa

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. Kulawa

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • Tsaftacewa: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • Samun iska: Ensure proper airflow around the console. Do not block ventilation openings.
  • Na'urar USB: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • Yanayin Muhalli: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. Shirya matsala

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • Babu Nuni: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • Allon madannai/Mouse Baya Amsa: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. Ƙayyadaddun bayanai

SiffarƘayyadaddun bayanai
Lambar SamfuraSaukewa: RKCONS1901
AlamarStarTech.com
Matsakaicin Rage1U
Girman NuniInci 19
Nau'in NuniActive Matrix TFT LCD
Maganin Max1280 x1024
Allon madannai99-key full keyboard with numeric keypad
Na'urar NuniTambarin taɓawa
Siffar BidiyoVGA
USB SupportEe
Yanayin Aiki0 zuwa 40 digiri Celsius
Farashin MTBF50,000 hours
Girman Samfura (LxWxH)21 x 19 x 1.7 inci
Nauyin Abu26.8 fam

8. Garanti da Tallafawa

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com website ko tuntuɓi sabis na abokin ciniki kai tsaye. Ajiye rasidin sayan ku don da'awar garanti.

Takardu masu alaƙa - Saukewa: RKCONS1901

Preview StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD - User Manual
Detailed user manual for the StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD (models SV431DUSBU, SV831DUSBU, SV1631DUSBU). Learn about installation, operation, OSD features, specifications, and technical support.
Preview StarTech.com 8-Port Rackmount KVM Canja - 4K 60Hz Manual mai amfani
Littafin mai amfani don StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH 8-Port Rackmount KVM Sauyawa. Yana ba da cikakkun bayanai game da shigarwa, haɗa consoles da PC, da amfani da umarnin hotkey don aiki na 4K 60Hz.
Preview StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch with OSD User Manual
This user manual provides detailed information on the StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch with OSD, including installation, operation, specifications, and technical support.
Preview StarTech.com SV441DUSBI / SV841DUSBI 4/8-Port Enhanced Digital USB KVM Switch Over IP with File Canja wurin Manual mai amfani
User manual for the StarTech.com SV441DUSBI and SV841DUSBI 4/8-Port Enhanced Digital USB KVM Switch Over IP with File Transfer. Learn about installation, configuration, operation, remote management, and troubleshooting.
Preview StarTech.com SV231DVIUDDM & SV431DVIUDDM: 2 & 4 Port DVI USB KVM Switch User Manual
User manual for StarTech.com SV231DVIUDDM (2-port) and SV431DVIUDDM (4-port) DVI USB KVM Switches with DDM. Covers installation, operation, specifications, hot-key functions, technical support, and warranty information.
Preview StarTech.com ADJSHELFHD/ADJSHELFHDV 1U Mai Daidaita Babban Lodi Mai Daidaita Shiryayyen Rackmount - Shigarwa da Bayani dalla-dalla
Learn how to install and use the StarTech.com ADJSHELFHD and ADJSHELFHDV 1U adjustable high load fixed rackmount shelves. This guide covers installation steps, included accessories, and technical specifications for these durable server rack shelves.