1. Gabatarwa
Thank you for choosing the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulb. Please read these instructions carefully before use and retain them for future reference.
This MR16 LED bulb is designed for various lighting applications, offering energy efficiency and a long lifespan. It features instant full brightness and is suitable for damp wurare.

Image: The FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb, showcasing its compact design and GU10 base.
2. Bayanin Tsaro
Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, or personal injury.
- GARGADI: Haɗarin girgizar lantarki. Kada a buɗe. Ba ya ɗauke da sassan da za a iya amfani da su.
- Kashe wuta kafin dubawa, shigarwa, ko cirewa.
- Kada a yi amfani da shi inda aka fallasa shi ga ruwa kai tsaye. Ya dace da damp wurare.
- Ba a yi nufin amfani da wannan na'urar don amfani da fitowar gaggawa ko fitilun gaggawa.
- Do not use with standard dimmers unless specifically stated as dimmable. This bulb is dimmable. Ensure your dimmer is compatible with LED technology.
- Kada a shigar da kwan fitila tare da rigar hannu ko lokacin tsaye akan rigar ko damp saman.
- Ensure the bulb is securely fastened in the fixture.
3. Saita da Shigarwa
This LED bulb is designed for easy installation into compatible GU10 base fixtures.
- Kashe Wuta: Before attempting any installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
- Cire Tsohon Kwan fitila: Allow the old bulb to cool completely before carefully removing it from the fixture. For GU10 bulbs, typically push up and twist counter-clockwise to unlock and remove.
- Sanya Sabon Kwan fitila: Align the two pins of the FEIT Electric BPMR16/GU10/930CA LED bulb with the holes in the GU10 socket. Push the bulb firmly into the socket and twist clockwise until it locks into place.
- Dawo da Power: Da zarar an shigar da kwan fitila amintacce, mayar da wutar lantarki zuwa na'urar da ke jujjuyawa.
- Gwaji: Kunna maɓallin wuta don tabbatar da kwan fitila yana aiki daidai.
If the bulb does not light up, ensure it is properly seated in the socket and that power is restored to the fixture.
4. Umarnin Aiki
The FEIT Electric BPMR16/GU10/930CA LED Bulb operates like a standard light bulb once installed.
- Kunna/Kashe: Use the existing light switch connected to your fixture to turn the bulb on or off. The bulb will instantly turn on to full brightness.
- Dimming: This bulb is dimmable. If your fixture is connected to a compatible LED dimmer switch, you can adjust the light output. Ensure your dimmer is specifically designed for LED bulbs to avoid flickering or performance issues.
- Yanayin Amfani: This bulb is suitable for both indoor and outdoor use, including damp locations. Avoid direct exposure to water.
5. Kulawa
The FEIT Electric BPMR16/GU10/930CA LED Bulb requires minimal maintenance.
- Tsaftacewa: Before cleaning, ensure the power to the fixture is turned off and the bulb has cooled. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
- Sauya: With an average life of 25,000 hours, this LED bulb is designed for long-term use. When replacement is eventually needed, follow the installation steps in Section 3.
6. Shirya matsala
If you encounter issues with your FEIT Electric LED bulb, refer to the following troubleshooting steps:
- Bulb Ba Ya Haskakawa:
- Tabbatar cewa wutar lantarki tana kunne.
- Bincika mai watsewar kewayawa ko fuse.
- Verify the bulb is securely seated in the GU10 socket. Turn off power, remove, and re-insert the bulb.
- Gwada kwan fitilar a wani kayan aiki don kawar da matsalar kayan aiki.
- Batutuwa masu Yawo ko Ragewa:
- Ensure your dimmer switch is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
- Check for loose connections in the fixture or switch.
- Bulb Emits Buzzing Noise:
- This can sometimes occur with incompatible dimmer switches. Try using the bulb without a dimmer or with a different LED-compatible dimmer.
If problems persist after following these steps, contact customer support.
7. Ƙayyadaddun bayanai
Detailed technical specifications for the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb:
| Alamar | Feit Wutar Lantarki |
| Sunan Samfura | FEIT ELECTRIC BPMR16/GU10/930CA |
| Nau'in Haske | LED |
| Girman Siffar Kwan fitila | Farashin 16 |
| Tushen Bulb | GU10 |
| Watatage | 35 Watts (Incandescent Equivalent) |
| Ainihin Wattage | Not specified (LED wattage typically much lower than incandescent equivalent) |
| Haske | 300 Lumen |
| Launi mai haske | Fari |
| Voltage | 120 Volts |
| Siffa ta Musamman | Dimmable |
| Amfanin Cikin Gida/Waje | Outdoor (also suitable for damp indoor locations) |
| Matsakaicin Rayuwa | 25,000 hours |
| Fihirisar Ma'anar Launi (CRI) | 80 |
| Nauyin Abu | 1.59 oz (45 Grams) |
| Girman samfur | 12.9 x 9.8 x 7.8 inci (girman marufi) |
8. Garanti da Tallafawa
Garanti: The manufacturer states "No warranty." for this product. Please refer to your retailer's return policy for any initial defects.
Taimakon Abokin Ciniki: For further assistance or inquiries, please contact Feit Electric customer service through their official website ko dillalin da aka siyo samfurin.





