Kwalkwalin Sena Universal Clamp Kit for Harley-Davidson CB/Audio (20S, 20S EVO, 30K) Instruction Manual

1. Gabatarwa

This manual provides instructions for the Sena Universal Helmet Clamp Kit, model SC-A0316, designed for use with Harley-Davidson CB/Audio systems. This kit is compatible with Sena 20S, 20S EVO, and 30K communication systems, enabling wired audio and CB functionality within your helmet.

Hoto na 1.1: Ƙarsheview of the Sena Universal Helmet Clamp Kit, showing the main clamp unit, speakers, microphones, and various cables and mounting accessories.

2. Abubuwan Kunshin

Tabbatar cewa duk abubuwa suna nan a cikin kunshin ku:

• Harley CB Audio Clamp
• Clamp Rufe Adafta
• Boom Makirufo
• Waya Boom Microphone
• Dynamic Speakers
• Hook and Loop Fastener for Boom Microphone
• Sponge Microphone
• Murfin Kakakin Kumfa
• Kugiya da Maɗaukakin Maɗaukaki don Masu Magana
• Adaftan Dutsen Surface Manne
• Allen tsananin baƙin ciki
• Speaker Port Cap
• Tambayoyin magana
• Rubber Pads
• Boom Microphone Riƙe
• Hook and Loop Fastener for Holder
• Installing Foam Speaker Cover Sheet
• 7-DIN Harley Cable

3. Saita da Shigarwa

This section details the installation of the clamp kit components into your helmet.

3.1. Haɗawa Clamp Naúrar

Da clamp unit secures the main module to your helmet. Choose between the clamp type or the glued surface mounting adapter based on your helmet's design and preference.

1. Clamp Shigarwa: Sake sukurori akan clamp unit using the provided Allen wrench. Slide the clamp between the helmet shell and the inner padding, ensuring a secure fit. Tighten the screws.
2. Glued Surface Mounting: Clean the desired mounting area on the helmet surface thoroughly. Peel the backing from the glued surface mounting adapter and firmly press it onto the helmet. Allow sufficient time for the adhesive to cure before attaching the main unit.

Image 3.1: The main clamp unit, which attaches to the side of the helmet.

3.2. Shigar da Kakakin

Position the speakers inside your helmet's ear pockets for optimal audio clarity.

1. Gano masu lasifikan hagu da dama.
2. Attach the hook and loop fasteners for speakers to the back of each speaker.
3. Place the speakers inside the helmet's ear pockets. Ensure they are positioned directly over your ears for the best sound experience. Use speaker pads or rubber pads if needed for proper fit and comfort.
4. Route the speaker wires neatly under the helmet padding to the clamp naúrar.

Image 3.2: The dynamic speakers with their wiring, designed to fit inside helmet ear pockets.

3.3. Sanya makirufo

Choose between the boom microphone for open-face helmets or the wired boom microphone for full-face helmets.

1. Boom Microphone: Attach the boom microphone holder to the inside of the helmet near your mouth using the hook and loop fastener. Insert the boom microphone into the holder. Apply a microphone sponge for wind noise reduction.
2. Wired Boom Microphone: For full-face helmets, route the wired boom microphone along the helmet's chin bar. Secure it with hook and loop fasteners so the microphone is positioned directly in front of your mouth. Apply a microphone sponge.
3. Connect the chosen microphone to the appropriate port on the clamp naúrar.

Image 3.3: The wired boom microphone, suitable for full-face helmets.

3.4. Connecting to Harley-Davidson CB/Audio

Use the provided 7-DIN Harley cable to connect the clamp unit to your motorcycle's CB/Audio system.

1. Locate the 7-DIN port on your Harley-Davidson motorcycle.
2. Connect one end of the 7-DIN Harley cable to the clamp naúrar.
3. Connect the other end of the cable to the motorcycle's 7-DIN port.

4. Umarnin Aiki

Wannan clamp kit facilitates the use of your Sena communication system (20S, 20S EVO, 30K) with your Harley-Davidson's integrated CB and audio system. The operation of the connected Sena unit itself is covered in its respective user manual.

4.1. Aikin Sauti

Once connected, audio from your Harley-Davidson's system (e.g., radio, intercom, navigation) will be routed through the helmet speakers. Adjust volume via your motorcycle's controls or the connected Sena unit.

4.2. CB Functionality

The microphone in your helmet will transmit through the motorcycle's CB system. Use your motorcycle's CB controls to manage transmission and reception.

4.3. Intercom (Motorcycle System)

If your Harley-Davidson has an integrated intercom system, this kit allows you to use your helmet's microphone and speakers for communication with a passenger or other connected riders through the motorcycle's system.

5. Kulawa da Kulawa

• Tsaftacewa: Shafa clamp unit and cables with a soft, damp zane. Kada a yi amfani da sinadarai masu tsauri ko kaushi.
• Microphone Sponges: Replace microphone sponges periodically to maintain optimal sound quality and hygiene.
• Duban Kebul: Regularly inspect all cables for signs of wear, fraying, or damage. Replace damaged cables immediately.
• Ajiya: Ajiye kayan a wuri mai sanyi da bushewa idan ba a amfani da su.

6. Shirya matsala

7. Ƙayyadaddun bayanai

8. Garanti da Tallafawa

Sena products are manufactured with high-quality materials and craftsmanship. This product is covered by a manufacturer's warranty. For specific warranty details and duration, please refer to the warranty information provided with your original Sena communication system or visit the official Sena website.

Samuwar Kayayyakin Kaya na EU: Spare parts for this product are available for a duration of 2 years from the date of purchase within the EU.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Sena Customer Service through their official website ko masu rabawa masu izini.

Albarkatun Kan layi: For the latest firmware updates, detailed user guides, and support FAQs, please visit the Sena website.