Hanwha Techwin HCV-6070R 2MP Outdoor Vandal-Resistant Dome Camera User Manual

Gabatarwa

This manual provides detailed instructions for the installation, operation, and maintenance of the Hanwha Techwin HCV-6070R 2MP Outdoor Vandal-Resistant Dome Camera. This camera is designed for outdoor security surveillance, offering 2-megapixel resolution, a 2.8-12mm manual varifocal lens, and night vision capabilities with a BNC connection.

Figure 1: Hanwha Techwin HCV-6070R 2MP Outdoor Vandal-Resistant Dome Camera.

Bayanin Tsaro

Please read all safety instructions carefully before installing or operating the camera. Keep this manual for future reference.

• Ensure the power supply matches the camera's requirements to prevent electrical shock or fire.
• Kada ka fallasa kyamarar ga yanayin zafi mai tsanani, danshi, ko muhallin da ke lalata ta.
• Installation should be performed by qualified personnel in accordance with local electrical codes.
• Avoid direct exposure of the lens to strong light sources for extended periods.
• Kada ka yi ƙoƙarin wargaza ko gyara kyamarar. Wannan zai ɓata garantin.

Abubuwan Kunshin

Tabbatar cewa duk abubuwa suna nan a cikin kunshin:

• Hanwha Techwin HCV-6070R Dome Camera (1 unit)
• Hawan Screws da Anchors
• Samfurin Shigarwa
• Jagoran Fara Mai Sauri
• Waterproof Cap (if applicable)

Saita

1. Hawan Kamara

The HCV-6070R is designed for wall mounting. Choose a suitable outdoor location that provides the desired surveillance coverage and is protected from direct impact.

1. Use the provided installation template to mark the drilling holes on the wall.
2. Drill holes according to the template and insert the wall anchors.
3. Secure the camera base to the wall using the mounting screws.
4. Daidaita kyamarar viewing angle as needed before tightening all screws.

2. Waya da Connections

The camera utilizes a BNC connection for video output and requires a separate power supply. Ensure all connections are secure and weatherproof for outdoor use.

• Haɗin Bidiyo: Connect a BNC cable from the camera's BNC port to the video input of your DVR (Digital Video Recorder).
• Haɗin Wuta: Connect a 12V DC power adapter (not included) to the camera's power input. The camera operates at 8 watts.
• Mara waya mara waya The camera supports Wi-Fi for remote control and monitoring. Refer to the operating section for initial Wi-Fi setup.

Hoto na 2: Example of a BNC coaxial cable for video connection. Ensure a secure connection to the camera and DVR.

3. Kanfigareshan Farko

After physical installation and power-up, access the camera settings via your connected DVR or a compatible mobile application (Android controller type specified).

• Saita kwanan wata da lokaci.
• Configure network settings for Wi-Fi connectivity.
• Adjust video quality and recording preferences.

Aiki da Kamara

1. Video Monitoring and Recording

The camera provides 2MP effective video resolution, capturing video at 1080p and a frame rate of 30 fps. Video is typically recorded in MPEG-4 format.

• Shiga kai tsaye view and recorded footage through your connected DVR or the remote control application.
• Ensure your DVR is configured to record from the correct channel.

2. Adjusting Focus and Zoom

The HCV-6070R features a 2.8-12mm manual varifocal lens with optical zoom. Adjustments are made manually on the camera body.

1. Loosen the focus and zoom locking screws on the camera lens assembly.
2. Adjust the zoom ring to achieve the desired field of view.
3. Adjust the focus ring until the image is clear and sharp.
4. Tighten the locking screws to secure the settings.

3. Night Vision and Low Light Performance

Equipped with night vision and "Night Color" low light technology, the camera automatically switches to infrared mode in low light conditions to provide clear surveillance footage. The light source type is LED.

• Ensure no obstructions block the infrared LEDs on the camera.
• The camera will automatically activate its infrared illuminators when ambient light levels drop.

4. Gano Motsi

The camera supports motion-only alerts. Configure motion detection zones and sensitivity settings through your DVR or the remote control application.

• Bayyana takamaiman yankuna a cikin kyamarar view don gano motsi.
• Set the sensitivity level to minimize false alarms.
• Configure alert notifications (e.g., email, push notifications) via your DVR or application.

5. Ikon nesa

The camera can be controlled remotely using a compatible Android application. Ensure the camera is connected to your Wi-Fi network.

• Download and install the Hanwha Techwin mobile application on your Android device.
• Follow the in-app instructions to add and connect to your HCV-6070R camera.
• Ta hanyar app, zaku iya view zauna fotage, access recordings, and adjust certain camera settings.

Kulawa

Kulawa na yau da kullun yana tabbatar da kyakkyawan aiki da tsawon rayuwar kamarar ku.

• Tsaftace Lens: Gently wipe the camera lens with a soft, clean, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces.
• Tsabtace Gidaje: Clean the camera's exterior housing with a damp zane. Kada a yi amfani da sinadarai masu tsauri ko masu gogewa.
• Duban Kebul: Periodically check all cables and connections for signs of wear, damage, or corrosion, especially for outdoor installations.
• Sabunta Firmware: Check the Hanwha Techwin website for any available firmware updates to ensure your camera has the latest features and security patches.

Shirya matsala

Ƙayyadaddun bayanai

Garanti da Taimako

For warranty information and technical support, please refer to the official Hanwha Techwin website ko tuntuɓi sabis na abokin ciniki kai tsaye. Ajiye rasidin siyan ku azaman shaidar siyan don da'awar garanti.

Mai ƙira: Hanwa

Kwanan Wata Farko Akwai: Fabrairu 19, 2019