Littattafai+

SEBSON 2_X_BWM_ALARM_B

SEBSON Motion Sensor with Alarm and Chime

Model: 2_X_BWM_ALARM_B

Jagoran Jagora

1. Gabatarwa

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Motion Sensor with Alarm and Chime. Please read this manual thoroughly before using the device to ensure proper function and safety.

The SEBSON Motion Sensor is designed to detect movement of people, large animals, and vehicles within its detection field. It can function as either an alarm or a chime, making it suitable for various applications such as entry alerts or security notifications.

2. Umarnin Tsaro

  • Ensure the device is installed in a dry, indoor environment. Avoid exposure to moisture or extreme temperatures.
  • Use only 9V alkaline batteries. Do not mix old and new batteries, or different types of batteries.
  • Zubar da batura masu amfani bisa ga ƙa'idodin gida.
  • Do not attempt to open or modify the device. This may void the warranty and pose a safety risk.
  • A kiyaye na'urar daga wurin yara.

3. Abubuwan Kunshin

Tabbatar cewa duk abubuwa suna nan a cikin kunshin:

  • 2 x SEBSON Motion Sensor units
  • 4 x Masu Haɗawa
  • 4 x Wall Plugs (Ø6mm)

Note: 9V batteries are not included and must be purchased separately.

4. Samfurin Ya Ƙareview

The SEBSON Motion Sensor consists of the main sensor unit and a rotatable mounting bracket. Key components include the motion detection lens, the speaker grille, and the mode selection switch.

Two SEBSON Motion Sensors with Alarm and Chime

Image: Two SEBSON Motion Sensor units, showing their compact design and white casing.

Close-up of the SEBSON Motion Sensor showing the mode switch

Hoto: Dalla-dalla view of the motion sensor, highlighting the mode switch with 'CHIME', 'OFF', and 'ALARM' settings.

5. Saita

5.1 Shigar da Baturi

  1. Gently slide open the battery compartment cover located on the back of the sensor unit.
  2. Insert two 9V alkaline batteries, ensuring correct polarity (+/-).
  3. Rufe murfin ɗakin baturi amintacce.
Diagram showing battery installation and mounting bracket assembly

Image: Exploded diagram illustrating how to open the battery compartment and insert batteries, along with the separate mounting bracket.

5.2 Hawan Sensor

  1. Choose a suitable location for the sensor. The detection range is 8 meters with a 60° angle. Consider areas where movement needs to be monitored.
  2. Mark the positions for the mounting screws on the wall using the mounting bracket as a template.
  3. Drill two holes (Ø6mm) at the marked positions.
  4. Saka matosai na bangon da aka tanadar a cikin ramukan da aka haƙa.
  5. Tsare shingen hawa zuwa bango ta amfani da sukurori da aka bayar.
  6. Slide the motion sensor unit onto the mounted bracket. The sensor housing can be rotated 360° within the bracket to adjust the detection area.
Diagram illustrating the 8-meter detection range and 60-degree angle of the motion sensor, with 360-degree rotation capability

Image: Technical diagram showing the sensor's 8-meter detection range, 60-degree detection angle, and the 360-degree rotation feature of the sensor unit within its bracket.

6. Umarnin Aiki

The SEBSON Motion Sensor features a three-position switch to select its operating mode:

  • CHIME Mode: When movement is detected, the sensor will emit a short, pleasant chime sound. This mode is ideal for entry alerts in shops or offices.
  • KASHE Yanayin: The sensor is powered off and will not detect movement or emit any sound.
  • Yanayin Ƙararrawa: When movement is detected, the sensor will emit a loud alarm sound. This mode is suitable for security purposes.

To select a mode, slide the switch on the side of the sensor to the desired position (CHIME, OFF, or ALARM).

Close-up of the SEBSON Motion Sensor showing the mode switch with CHIME, OFF, and ALARM settings

Hoto: Dalla-dalla view of the sensor's side, clearly showing the three-position switch for selecting between Chime, Off, and Alarm modes.

7. Kulawa

  • Tsaftacewa: Wipe the sensor's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Madadin Baturi: If the sound becomes weak or the sensor stops responding, replace the 9V batteries. Follow the battery installation steps in Section 5.1.
  • Kulawar Lens: Keep the motion detection lens clean and free from obstructions to ensure optimal performance.

8. Shirya matsala

MatsalaDalili mai yiwuwaMagani
Sensor baya gano motsi.
  • Batir ya ƙare ko kuma an saka shi ba daidai ba.
  • Sensor is in OFF mode.
  • Detection lens is obstructed or dirty.
  • Object is outside detection range/angle.
  • Sauya batura ko duba polarity.
  • Slide switch to CHIME or ALARM mode.
  • Clean the detection lens.
  • Adjust sensor position or angle.
Sauti ya yi ƙasa sosai ko kuma ya yi muni.
  • Batura ba su da ƙasa.
  • Speaker grille is obstructed.
  • Sauya batura.
  • Ensure speaker grille is clear.
Ƙararrawa na ƙarya.
  • Sensor is detecting unwanted movement (e.g., pets, moving curtains).
  • Direct sunlight or heat sources interfering with detection.
  • Adjust sensor angle or relocate to avoid unwanted detection.
  • Reposition sensor away from direct sunlight or heat sources.

9. Ƙayyadaddun bayanai

SiffarDaki-daki
AlamarSEBSON
Lambar Samfura2_X_BWM_ALARM_B
Tushen wutar lantarkiBattery Powered (2x 9V batteries, not included)
Battery Type RecommendedAlkalin
Rage GanewaHar zuwa mita 8
Angle Detection60 digiri
Ƙarfin Juyawa360 degrees (within bracket)
Nau'in hawaDutsen bango
LauniFari
Girma (Kunshin)12 x 9 x 8 cm
Nauyi (Abu)280g ku

10. Garanti da Tallafawa

SEBSON products are designed and manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. For specific warranty details, technical support, or assistance with your device, please contact SEBSON customer service through their official website ko dillalin da aka siyo samfurin.

Da fatan za a riƙe shaidar siyan ku don da'awar garanti.