ANSMANN HD70B LED Headlamp Manual mai amfani

1. Gabatarwa

Thank you for choosing the ANSMANN HD70B LED Headlamp. This manual provides essential information for the safe and efficient use of your headlamp. Please read it thoroughly before operation and retain it for future reference.

The ANSMANN HD70B is a versatile and lightweight lighting solution, designed for various activities such as camping, emergencies, work, reading, boating, sports, and cycling. Its robust, splash-proof (IP44) casing ensures durability in diverse environments. Constructed from durable ABS plastic, the headlamp weighs only 66g (including battery), providing optimal comfort for extended wear. The adjustable elastic headband ensures a secure and comfortable fit for both children and adults. The lamp's tilt angle can be adjusted up to 45° for precise illumination.

Abubuwan Kunshin:

• 1 x ANSMANN HD70B LED Headlamp (Tsarin 1600-0260)
• 1 x AA Mignon Battery
• 1 x Manhajar mai amfani

2. Umarnin Tsaro

• Kar a duba kai tsaye cikin hasken fitilar LED.
• A kiyaye nesa da yara.
• Kar a haxa tsofaffi da sababbin batura, ko nau'ikan batura daban-daban.
• Cire batura idan headlamp will not be used for an extended period to prevent leakage.
• Zubar da batura bisa ga dokokin gida.
• Kanun labaraiamp is IP44 splash-proof; do not immerse it in water.

3. Saita

3.1 Shigar da Baturi

1. Locate the battery compartment on the back of the headlamp naúrar.
2. Carefully open the battery compartment cover. This typically involves sliding a latch or gently prying open a tab. If you encounter resistance, ensure no screws are present and apply gentle, even pressure.
3. Insert one AA Mignon battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Rufe murfin batir amintacce har sai ya danna wurin.

Figure 1: The ANSMANN HD70B LED Headlamp. The battery compartment is located on the rear of the main light unit.

3.2 Daidaita Ƙwallon Kaya

The elastic headband is adjustable to fit various head sizes. Slide the buckles on either side of the headband to achieve a comfortable and secure fit.

3.3 Daidaita kusurwar karkatarwa

Kanun labaraiamp unit can be tilted up to 45° to direct the light beam precisely where needed. Gently push or pull the light unit to adjust its angle.

Figure 2: The headlamp features a 45° swivel joint for adjustable light direction.

4. Aiki

Kanun labaraiamp is operated via a single button located on the top of the unit.

4.1 Powering On/Off and Switching Modes

• Latsa Farko: Activates the Main LED at 100% power (65 lumens). This mode provides a strong, long-range beam.
• Latsa Na Biyu: Switches to Main LED at 25% power (16 lumens). This mode offers extended battery life with sufficient illumination for close-range tasks.
• Latsa na uku: Activates the Auxiliary LEDs (12 lumens). This mode provides a wider, softer light for peripheral vision and close-up work.
• Latsa Hudu: Juya kaiamp KASHE

Kanun labaraiamp is also dimmable, allowing for fine-tuning of light output within each mode by holding the button (specific dimming instructions may vary slightly; refer to practical use).

Figure 3: The headlamp is IP44 splash-proof and features a powerful LED.

5. Kulawa

5.1 Tsaftacewa

Goge kaiamp da taushi, damp cloth. Do not use abrasive cleaners or solvents. Ensure the battery compartment is dry before closing.

5.2 Sauya Baturi

When the light output becomes dim or the headlamp stops functioning, replace the AA battery following the instructions in Section 3.1. Always use a fresh, high-quality AA battery.

5.3 Adana

Ajiye headlamp in a cool, dry place. If storing for an extended period, remove the battery to prevent potential leakage and damage to the device.

6. Shirya matsala

• Shugaban kaiamp ba kunna:
  • Duba ko an saka batirin daidai da polarity ɗin da ya dace.
  • Ensure the battery compartment cover is fully closed.
  • Sauya baturin da sabon.
• Difficulty opening the battery compartment:
  • Ensure you are not forcing it. Look for a small latch or a designated sliding area. Some compartments require a firm but gentle slide or a slight prying motion with a fingernail or small, flat tool at a specific point. Refer to any diagrams on the product packaging if available.
• Fitowar haske mai ƙarancin ƙarfi:
  • The battery may be low. Replace it with a fresh AA battery.
  • Tabbatar da kaiamp is not in a lower power mode (e.g., Main LED 25% or Auxiliary LEDs). Cycle through the modes to check.

7. Ƙayyadaddun bayanai

8. Garanti da Tallafawa

ANSMANN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official ANSMANN website. Da fatan za a riƙe shaidar siyan ku don kowane da'awar garanti.