Strymon Volante Magnetic Echo Machine Instruction Manual

1. Gabatarwa

The Strymon Volante is a magnetic echo machine designed to deliver a wide range of vintage delay effects. It features three distinct echo engines: Drum echo, Tape echo, and Reel-to-Reel studio echo, along with a Sound on Sound looper mode and an onboard spring reverb. This pedal is suitable for electric and acoustic guitars, synthesizers, vocals, and keyboards, offering extensive control over delay parameters and sonic characteristics.

2. Bayanin Tsaro

• Tushen wutan lantarki: Use only the specified 9V DC power supply with the correct polarity. Using an incorrect power supply can damage the unit and void the warranty.
• Ruwa da Danshi: Do not expose the unit to water or excessive moisture. This can cause electric shock or fire.
• Samun iska: Tabbatar da samun iska mai kyau a kusa da na'urar. Kada a toshe hanyoyin samun iska.
• Tsaftacewa: Tsaftace na'urar da kyalle mai laushi da busasshe. Kada a yi amfani da masu tsaftace ruwa ko kuma aerosols.
• Hidima: Kada kayi ƙoƙarin yiwa sashin hidima da kanka. Koma duk hidima ga ƙwararrun ma'aikatan sabis.

3. Abubuwan Kunshin

Upon opening the box, verify that the following items are included:

• Strymon Volante Magnetic Echo Machine pedal
• 9V DC Power Supply (specific to region)
• Kebul na USB
• Quick Start Guide (this manual provides detailed instructions)

4. Samfurin Ya Ƙareview da Gudanarwa

The Volante pedal features a comprehensive set of controls for shaping your echo sounds. Familiarize yourself with the layout below.

Hoto na 4.1: Sama view of the Strymon Volante pedal, showing all knobs, switches, and footswitches.

Babban Sarrafa Taɗi:

• REC LEVEL: Adjusts the input gain for the echo signal. Higher settings introduce more saturation.
• KASAN KASHI: Filters out low frequencies from the echo repeats.
• MECHANICS: Controls the mechanical integrity of the virtual echo machine, affecting wow, flutter, and other imperfections.
• SANYA: Simulates the degradation of the magnetic medium, adding warmth and character to the repeats.
• TYPE Canjawa: Selects between Drum, Tape, and Studio echo engines.
• SPEED Switch: Adjusts the playback speed of the echo, affecting delay time (Half, Normal, Double).
• YANA MAGANA: Controls the number of echo repeats.
• MATAKIN ECHO: Adjusts the overall volume of the echo repeats.
• Marmaro: Controls the level of the onboard spring reverb.
• TIME Playback/Feedback LEDs (1-4): Indicate active playback and feedback heads.
• SPACING Switch: Adjusts the spacing between the virtual playback heads (Even, Triplet, Golden, Silver).

Mayukan ƙafafu:

• ON (Left Footswitch): Toggles the effect on/off. Hold for Reverse.
• FAVORITE (Middle Footswitch): Recalls a saved preset. Hold for Pause (in Sound on Sound mode).
• TAP (Right Footswitch): Taps in the delay tempo. Hold for Splice (in Sound on Sound mode).

Hoto na 4.2: Rear panel connections of the Strymon Volante, including audio inputs/outputs, expression pedal, USB, MIDI, and power input.

Haɗin Rukunin Baya:

• INST/LINE Switch: Selects input level for instrument or line level signals.
• LEFT IN / RIGHT IN: Mono or stereo audio inputs.
• LEFT OUT / RIGHT OUT: Stereo audio outputs.
• EXP: Expression pedal input for real-time control of parameters.
• USB: USB connection for firmware updates and MIDI control.
• MIDI IN / MIDI FITA: Standard MIDI connections for advanced control and synchronization.
• 9VDC: Power input for the included 9V DC power supply.

5. Saita

5.1 Haɗin Wuta

1. Ensure the Volante is switched off (if applicable) and all audio connections are made before connecting power.
2. Haɗa wutar lantarki ta DC 9V da aka haɗa zuwa Saukewa: 9VDC input on the rear panel.
3. Plug the power supply into a suitable wall outlet.

5.2 Haɗin Sauti

The Volante supports both mono and stereo operation.

• Mono Setup: Haɗa kayan aikin ku zuwa LEFT IN jack. Connect the FITA jak ku amplifier or next pedal.
• Saitin sitiriyo: Connect your stereo source (e.g., another stereo pedal, synth) to the LEFT IN kuma RIGHT IN jacks. Connect the FITA kuma GASKIYA jacks to your stereo amplifier setup or audio interface.
• Matsayin shigarwa: Yi amfani da INST/LINE switch to match your input signal level. Set to INST for guitar/bass, and LINE for synthesizers or effects loops.

5.3 MIDI and USB Connections (Optional)

• MIDI: Connect MIDI cables from your MIDI controller or interface to the MIDI IN kuma MIDI FITA jacks for advanced control, preset changes, and synchronization.
• USB: Connect a USB cable from the Volante to your computer for firmware updates and MIDI over USB functionality.

6. Umarnin Aiki

6.1 Basic Aiki

1. Shiga Tasirin: Danna maɓallin ON footswitch to activate the delay effect. The LED above the footswitch will illuminate.
2. Select Echo Type: Yi amfani da TYPE switch to choose between Drum, Tape, or Studio echo.
3. Adjust Delay Time: The delay time is primarily controlled by the TAP footswitch. Tap it two or more times to set the tempo. The SAURI switch (Half, Normal, Double) further divides or multiplies the tapped tempo.
4. Control Repeats: Juya da YANA MAGANA knob to increase or decrease the number of echo repetitions.
5. Set Echo Level: Yi amfani da MATAKIN ECHO knob to blend the wet (effected) signal with your dry signal.
6. Add Spring Reverb: Daidaita SPRING knob to introduce the onboard spring reverb.

6.2 Shaping the Echo Tone

• REC LEVEL: For clean echoes, keep this knob lower. Increase it to introduce natural saturation and soft clipping characteristic of magnetic media.
• KASAN KASHI: Use this to remove muddy low frequencies from your repeats, making them clearer and less intrusive.
• MECHANICS & WEAR: These knobs allow you to dial in the imperfections and character of vintage echo machines. Experiment with them to achieve desired vintage textures.
• TSARA: The BAYANAI switch alters the rhythmic relationship between the four virtual playback heads.
  • Ko da: Heads are equally spaced.
  • Triplet: Creates triplet-based rhythms.
  • Golden: Asymmetrical spacing for unique rhythmic patterns.
  • Azurfa: Another asymmetrical spacing option.

6.3 Sound on Sound Looper Mode

The Volante features a mono Sound on Sound looper mode, inspired by classic tape looping techniques.

1. Engage Looper: Rike da TAP footswitch for approximately 1 second until the LED above it flashes. This enters Sound on Sound mode.
2. Yi rikodin: The looper automatically starts recording when engaged. Play your phrase.
3. Overdub: After the initial loop is recorded, the looper automatically enters overdub mode. Play additional layers.
4. Tsaya/share: Danna maɓallin ON footswitch to stop playback. Hold the ON footswitch to clear the loop.
5. Dakata: In Sound on Sound mode, hold the FIFITA footswitch to pause the loop.
6. Raba: In Sound on Sound mode, hold the TAP footswitch to splice the loop, creating a new loop point.
7. Juya: While the loop is playing, hold the ON footswitch to reverse the loop playback.

6.4 Saiti

The Volante allows you to save and recall your favorite settings.

• Ajiye Saiti: Once you have dialed in your desired sound, press and hold the FIFITA footswitch until its LED flashes, then release. Your current settings are now saved to the Favorite preset.
• Recalling a Preset: Danna maɓallin FIFITA footswitch to instantly recall your saved preset.
• Lura: The Volante supports up to 300 presets via MIDI, but only one "Favorite" preset is directly accessible via the footswitch.

7. Na gaba Features

7.1 Expression Pedal Control

Connect a standard expression pedal to the EXP jack to control various parameters in real-time. The specific parameter controlled can be configured via secondary functions or MIDI.

7.2 MIDI Implementation

The Volante offers extensive MIDI control for integration into complex setups.

• MIDI Control Change (CC): Most knobs and switches can be controlled via MIDI CC messages.
• Canjin Shirin (PC): Access up to 300 presets using MIDI Program Change messages.
• Daidaita Agogon MIDI: Synchronize the delay tempo with external MIDI clock sources.
• Refer to the full MIDI Implementation Chart available on the Strymon websaitin don cikakkun bayanai.

8. Kulawa

• Tsaftacewa: Wipe the pedal with a soft, dry cloth to remove dust and grime. Avoid abrasive cleaners or solvents.
• Ajiya: Ajiye feda a wuri mai sanyi da bushewa, nesa da hasken rana kai tsaye da kuma yanayin zafi mai tsanani idan ba a amfani da shi.
• Sabunta Firmware: Periodically check the Strymon website for firmware updates. Updates can introduce new features or improve performance. Use the USB connection and the Strymon Updater software to perform updates.

9. Shirya matsala

10. Ƙayyadaddun bayanai

11. Garanti da Tallafawa

11.1 Bayanin Garanti

Strymon products are designed and built to high standards. For detailed warranty information, including coverage period and terms, please refer to the official Strymon website ko tuntuɓi goyon bayan abokin ciniki. Ajiye shaidar siyan ku don da'awar garanti.

11.2 Tallafin Abokin Ciniki

If you encounter any issues not covered in this manual or require further assistance, please visit the official Strymon support page or contact their customer service team. You can typically find contact information and FAQs on the Strymon website.

Strymon Website: www.strymon.net