SINOTIMER MC901-611 Universal Intelligent Temperature Control Meter User Manual

1. Gabatarwa

The SINOTIMER MC901-611 is a universal intelligent temperature control meter designed for precise temperature regulation in various industrial and laboratory applications. This device features a clear LCD display, multiple input types, and reliable output options, making it suitable for a wide range of temperature control needs. This manual provides essential information for the safe and effective operation, installation, and maintenance of your MC901-611 temperature controller.

2. Bayanin Tsaro

Please read this manual thoroughly before operating the device to ensure safe and correct usage. Keep this manual for future reference.

Babban Kariyar Tsaro:

• Tabbatar da wutar lantarki voltage matches the specifications of the device (100-240V AC, 50/60Hz).
• Do not operate the device in environments with excessive dust, humidity, corrosive gases, or strong vibrations.
• Disconnect power before performing any wiring, maintenance, or inspection.
• ƙwararrun ma'aikata ne kawai yakamata suyi shigarwa da wayoyi.
• Avoid touching internal components when the device is powered on.
• Tabbatar da ƙasa mai kyau don hana girgiza wutar lantarki.
• Kada a sake haɗa ko gyara na'urar. Canje-canje mara izini na iya ɓata garanti da haifar da haɗari.

3. Samfurin Ya Ƙareview

The MC901-611 temperature controller features a compact design with a clear digital display and intuitive control buttons.

Hoto 3.1: Gaban Gaba
This image displays the front panel of the MC901-611. It features two digital displays: PV (Process Value) in red, showing the current temperature, and SV (Set Value) in green, showing the target temperature. Below the displays are indicator lights for OUT (Output), AT (Auto-tuning), ALM1 (Alarm 1), and ALM2 (Alarm 2). The control buttons include SET, R/S (Run/Stop), Down arrow, and Up arrow.

Mabuɗin Abubuwan:

• Nuni na PV: Shows the current measured temperature (Process Value).
• Nuni na SV: Shows the set target temperature (Set Value).
• Fitilar Nuni: OUT (Output status), AT (Auto-tuning status), ALM1 (Alarm 1 status), ALM2 (Alarm 2 status).
• Maɓallan sarrafawa: SET (Enter/Confirm settings), R/S (Run/Stop), Up/Down arrows (Adjust values).
• Toshe Tasha: Located at the rear for electrical connections.
• Maƙallan Haɗawa: For secure panel installation.

Figure 3.2: Side Panel with Specifications Label
This image shows the side of the MC901-611, highlighting the product label. The label provides crucial information such as Model (MC901-611), Input type (K, default setting), Temperature Range (0-1300°C), Temperature Unit (Celsius/Fahrenheit), Output type (Relay/SSR), Alarm (ALM1), Accuracy Class (0.5), and Power Supply (100-240V AC, 50/60Hz).

Figure 3.3: Rear Panel with Terminal Block
This image displays the rear of the MC901-611, featuring the terminal block for electrical connections. The terminals are clearly numbered, indicating where to connect power, sensor inputs, and control outputs. Proper wiring according to the provided diagram is essential for safe and correct operation.

4. Saita da Shigarwa

4.1 Panel Mounting:

The MC901-611 is designed for panel mounting. Ensure the cutout dimensions in your panel match the device's specifications.

1. Cut an opening in your panel according to the specified dimensions (refer to specifications section for exact size).
2. Insert the MC901-611 into the panel cutout from the front.
3. Attach the provided mounting brackets to the sides of the controller from the rear of the panel.
4. Tighten the screws on the mounting brackets to secure the controller firmly in place. Do not overtighten.

Hoto na 4.1: Ƙaƙƙarfan Haɗawa
This image shows the two mounting brackets included with the MC901-611. These brackets are used to secure the temperature controller firmly within a panel cutout, ensuring stable installation.

4.2 Tsarin Waya:

Refer to the wiring diagram on the side of the unit or in the detailed manual for correct connections. Ensure all connections are secure and insulated.

• Tushen wutan lantarki: Connect the main power supply (100-240V AC, 50/60Hz) to the designated terminals.
• Shigar da Sensor: Connect your temperature sensor (e.g., K-type thermocouple) to the sensor input terminals. Ensure correct polarity for thermocouples.
• Abubuwan sarrafawa: Connect your heating/cooling element or SSR to the control output terminals.
• Fitar da Ƙararrawa (Zaɓi ne): If using alarm functions, connect external alarm devices to the alarm output terminals.

Note: A detailed wiring diagram is typically provided on the physical unit or in a separate wiring guide. Always consult the specific diagram for your model.

5. Umarnin Aiki

5.1 Kunnawa:

Once wired correctly, apply power to the unit. The PV display will show the current temperature, and the SV display will show the last set temperature.

5.2 Setting the Target Temperature (SV):

1. Danna maɓallin SET button once. The SV display will start flashing.
2. Yi amfani da Up (▲) kuma Kasa (▼) arrow buttons to adjust the target temperature.
3. Danna maɓallin SET button again to confirm the new SV and exit the setting mode. The SV display will stop flashing.

5.3 Saitunan Siga:

To access advanced parameter settings (e.g., input type, control mode, alarm settings):

1. Latsa ka riƙe SET button for approximately 3-5 seconds until the first parameter code appears on the PV display.
2. Yi amfani da Up (▲) kuma Kasa (▼) arrow buttons to navigate through different parameter codes.
3. Latsa SET ku view the value of the currently displayed parameter.
4. Yi amfani da Up (▲) kuma Kasa (▼) arrow buttons to change the parameter value.
5. Latsa SET to confirm the new value and return to the parameter code display.
6. To exit parameter setting mode, press and hold the SET button again for 3-5 seconds, or wait for the device to automatically exit after a period of inactivity.

Consult the full product manual for a complete list of parameter codes and their functions.

5.4 Auto-tuning (AT):

Auto-tuning helps the controller optimize its PID parameters for stable and accurate temperature control. This process is recommended after initial setup or if control performance is unsatisfactory.

1. Set the desired target temperature (SV).
2. Latsa ka riƙe R/S button for approximately 3-5 seconds. The AT indicator light will illuminate, and the controller will begin the auto-tuning process.
3. Allow the auto-tuning process to complete. This may take some time as the controller cycles the output to learn the system's characteristics. The AT light will turn off once tuning is complete.
4. Do not interrupt the auto-tuning process.

6. Kulawa

Regular maintenance ensures the longevity and optimal performance of your MC901-611 temperature controller.

• Tsaftacewa: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the unit. Do not use abrasive cleaners, solvents, or water, as these can damage the display or internal components.
• Dubawa: Periodically check all wiring connections for looseness or damage. Ensure the terminal screws are tight.
• Muhalli: Tabbatar cewa yanayin aiki ya kasance cikin ƙayyadadden yanayin zafi da zafi don hana lalacewa.
• Duban Sensor: If temperature readings appear inaccurate, check the sensor and its wiring for damage or corrosion.

7. Shirya matsala

This section addresses common issues you might encounter with your MC901-611 temperature controller.

Idan matsalar ta ci gaba bayan ƙoƙarin waɗannan mafita, tuntuɓi tallafin abokin ciniki.

8. Ƙayyadaddun bayanai

Technical specifications for the SINOTIMER MC901-611 Universal Intelligent Temperature Control Meter.

9. Garanti da Tallafawa

Bayanin Garanti:

SINOTIMER products are typically covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or contact SINOTIMER customer service for specific warranty terms and conditions.

Taimakon Abokin Ciniki:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact SINOTIMER customer support. Have your product model number (MC901-611) and purchase information ready when contacting support.

Contact information for SINOTIMER can usually be found on their official website ko a kan marufi na samfur.