Jagorar Mai Amfani da Tashar Iskar Gas ta Wolf CGW-2/14/100L

1. Gabatarwa

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Wolf CGW-2/14/100L gas condensing boiler. Please read it thoroughly before installation or use and retain it for future reference. The Wolf CGW-2/14/100L is an integrated heating system composed of the CGB-2 gas condensing boiler with a stainless steel hot water heat exchanger and a stratified stainless steel storage tank with special insulation.

2. Umarnin Tsaro

Kullum a kiyaye waɗannan matakan tsaro don hana rauni ko lalacewar na'urar.

• Ma'aikata Masu cancanta: Installation, maintenance, and repair must only be carried out by qualified and authorized personnel.
• Tsaron Gas: In case of a gas leak, immediately shut off the gas supply, open windows and doors, and do not operate any electrical switches. Contact your gas supplier and a qualified technician.
• Tsaron Wutar Lantarki: Ensure the appliance is properly grounded. Do not touch electrical components with wet hands. Disconnect power before any service.
• Zafafan Filaye: The boiler and associated piping can become hot during operation. Avoid direct contact to prevent burns.
• Samun iska: Ensure adequate ventilation in the installation area as required by local regulations.
• Kayayyakin wuta: Do not store flammable materials near the boiler.

3. Samfurin Ya Ƙareview

The Wolf CGW-2/14/100L combines a high-efficiency gas condensing boiler with an integrated hot water storage tank, designed for optimal space utilization and energy performance.

Image showing the front view of the Wolf CGW-2/14/100L gas condensing boiler. The unit is white with a dark control panel visible on the lower left, displaying temperature and operational status. To the right, an integrated storage tank is visible.

Mabuɗin Abubuwan:

• Gas Condensing Boiler (CGB-2): High-efficiency unit for heating.
• Stainless Steel Hot Water Heat Exchanger: For domestic hot water production.
• Stratified Stainless Steel Storage Tank (100L): Ensures rapid and efficient hot water availability.
• Haɗin Kan Kwamitin Kulawa: For setting and monitoring operational parameters.

4. Saita da Shigarwa

Installation of the Wolf CGW-2/14/100L must be performed by a certified heating engineer in accordance with all local and national regulations, including gas, electrical, and plumbing codes.

Matakan Shigarwa (Overview):

1. Shirye-shiryen Yanar Gizo: Ensure the installation location meets space, ventilation, and structural requirements.
2. hawa: Securely mount the boiler unit to the wall.
3. Haɗin Ruwa: Connect heating flow and return, cold water inlet, and hot water outlet.
4. Haɗin Gas: Connect the gas supply line. This must be leak-tested.
5. Flue Gas System: Install the appropriate flue gas exhaust system.
6. Haɗin Wutar Lantarki: Connect the power supply and control wiring.
7. Filling and Venting: Fill the heating system with water and vent all air.
8. Farkon Farko: Perform initial startup and functional checks according to manufacturer guidelines.

5. Umarnin Aiki

The integrated control panel allows for easy adjustment of heating and hot water settings.

5.1. Kunnawa/Kashe

• Don Kunnawa: Ensure the gas supply is open and the electrical power is connected. Press the power button on the control panel. The display will illuminate.
• Don Kashe: Press and hold the power button until the display turns off. For complete shutdown, also close the gas supply and disconnect electrical power.

5.2. Daidaita Zazzabi

• Zazzabi: Use the navigation buttons on the control panel to access the heating settings. Adjust the desired flow temperature or room temperature (if an external thermostat is connected).
• Domestic Hot Water Temperature: Navigate to the hot water settings on the control panel. Set the desired hot water temperature.

5.3. Ƙarshen Sarrafaview

The digital display provides information on current operating status, temperatures, and any error messages. Refer to the detailed control panel section in the full manufacturer's manual for specific icon and menu navigation instructions.

6. Kulawa

Regular maintenance ensures the longevity, efficiency, and safe operation of your Wolf CGW-2/14/100L boiler.

• Hidimar Shekara-shekara: Have the boiler inspected and serviced annually by a qualified technician. This includes cleaning the heat exchanger, checking combustion, and verifying safety devices.
• Matsin tsarin: Regularly check the system pressure on the boiler's display or pressure gauge. It should typically be between 1.0 and 2.0 bar. If low, repressurize the system according to manufacturer instructions or contact a technician.
• Duban gani: Periodically check for any visible leaks, corrosion, or unusual noises.
• Tsaftacewa: Clean the exterior of the boiler with a soft, damp zane. Kada a yi amfani da masu tsabtace abrasive.

7. Shirya matsala

This section provides solutions for common issues. For complex problems or if you are unsure, always contact a qualified service technician.

8. Ƙayyadaddun bayanai

Technical data for the Wolf CGW-2/14/100L gas condensing boiler.

9. Garanti da Tallafawa

Wolf products are manufactured to high quality standards and come with a manufacturer's warranty. Please refer to the warranty documentation provided with your appliance for specific terms and conditions.

Taimakon Abokin Ciniki:

For technical assistance, spare parts, or warranty claims, please contact your authorized Wolf dealer or a certified service partner. You can also visit the official Wolf website for further information and contact details.

• Mai ƙira Website: www.wolf.eu (Fitamplink ɗin, don Allah a tabbatar da hukuma website)
• Contact Sabis: Refer to your local dealer information.