E-flite Carbon-Z Cessna 150 2.1M BNF Basic RC Airplane Instruction Manual

1. Samfurin Ya Ƙareview

The E-flite Carbon-Z Cessna 150 2.1M BNF Basic is a large-scale remote control aircraft designed for sport flying. This model offers a wide flight envelope, suitable for various flying styles. It incorporates scale details and features for an enhanced experience.

Mabuɗin fasali:

• Large sport-scale model suitable for diverse flight maneuvers.
• Wide flight envelope, accommodating both gentle and aggressive flying.
• Scale details including LED lights, functional flaps, and wheel pants.
• Designed for field assembly without requiring tools.
• Innovative hands-free servo connection system for simplified setup.

Hoto 1.1: Gaba view of the E-flite Carbon-Z Cessna 150 2.1M RC Airplane.

2. Bayanin Tsaro

GARGADI: Karanta cikakken jagorar koyarwa don sanin fasalulluka na samfurin kafin aiki. Rashin yin aiki da samfurin daidai zai iya haifar da lalacewa ga samfurin, dukiya da haifar da mummunan rauni. Wannan nagartaccen samfurin sha'awa ne. Dole ne a yi aiki da shi cikin taka tsantsan da hankali kuma yana buƙatar wasu ƙwarewar injina. Rashin yin aiki da wannan samfur a cikin aminci da alhaki zai iya haifar da rauni ko lalacewa ga samfur ko wata kadara. Ba a yi nufin wannan samfurin don amfani da yara ba tare da kulawar manya kai tsaye ba. Kada kayi amfani da abubuwan da basu dace ba ko canza wannan samfur ta kowace hanya a waje da umarnin Horizon Hobby, LLC. Wannan littafin ya ƙunshi umarni don aminci, aiki da kiyayewa. Yana da mahimmanci a karanta da bi duk umarni da faɗakarwa a cikin jagorar, kafin haɗawa, saiti ko amfani, don aiki daidai da guje wa lalacewa ko rauni mai tsanani.

3. Abin da ke cikin Akwatin

• Carbon-Z Cessna 150 BNF Basic RC Airplane

Note: Additional components such as a compatible Spektrum DSMX/DSM2 transmitter, flight battery, and charger are required and sold separately.

4. Saita da Majalisa

4.1 Wing Assembly

1. Carefully slide each wing panel onto the wing tube until it is fully seated against the fuselage.
2. Ensure the hands-free servo connections engage properly.
3. Secure each wing panel using the provided fasteners or pins, as indicated in the manual.

Figure 4.1: Detail of component assembly, showing a pin being inserted.

4.2 Landing Gear Installation

Attach the main landing gear and tail wheel assembly according to the diagrams. Ensure all connections are secure. The model features wheel pants for scale appearance.

4.3 Servo Connections

The Carbon-Z Cessna 150 utilizes an innovative hands-free servo connection system. When assembling the wings, ensure the servo connectors align and engage automatically. Verify all control surfaces move freely and correctly after assembly.

Figure 4.2: Detail of the hands-free servo connection system.

4.4 Battery Installation and Binding

1. Install the recommended flight battery (sold separately) into the designated battery compartment. Secure it to prevent movement during flight.
2. Follow the instructions for your Spektrum DSMX/DSM2 compatible transmitter to bind it with the aircraft's receiver. Refer to your transmitter's manual for specific binding procedures.
3. After binding, perform a control surface test to ensure all controls (ailerons, elevator, rudder, throttle) respond correctly to transmitter inputs.

5. Umarnin Aiki

5.1 Duban Jirgin sama

• Ensure the flight battery is fully charged and securely installed.
• Verify all control surfaces move freely and in the correct direction relative to transmitter inputs.
• Check propeller for any damage or looseness.
• Confirm the transmitter battery is adequately charged.
• Perform a range check of your radio system before the first flight of the day.

5.2 Tafiya

Place the aircraft on a smooth surface facing into the wind. Gradually advance the throttle. Apply slight up-elevator as speed increases to lift off. Maintain a steady climb rate.

5.3 Jirgi

The Carbon-Z Cessna 150 is designed for stable flight characteristics. Use the ailerons for roll control, elevator for pitch, and rudder for yaw. Adjust throttle to control speed. Utilize flaps for slower flight and improved lift during takeoff and landing, if desired.

Figure 5.1: The Carbon-Z Cessna 150 in stable flight.

5.4 Saukowa

Approach the landing strip into the wind. Reduce throttle and gradually deploy flaps if using them. Maintain sufficient airspeed for control. Flare gently by applying up-elevator just before touchdown to achieve a smooth landing.

6. Kulawa

6.1 Duban Jirgin sama

• Inspect the airframe for any damage, cracks, or loose components.
• Check all control linkages and hinges for wear or looseness.
• Examine the propeller and spinner for damage. Replace if necessary.
• Ensure landing gear is secure and undamaged.

6.2 Tsaftacewa da Adanawa

Clean the aircraft with a soft, damp cloth. Avoid using harsh chemicals. Store the model in a cool, dry place, away from direct sunlight and extreme temperatures, to preserve its materials and electronics.

7. Shirya matsala

8. Ƙayyadaddun bayanai

Figure 8.1: The Carbon-Z Cessna 150 demonstrating its substantial size.

9. Garanti Bayani

This product is covered by a limited warranty provided by Horizon Hobby, LLC. For detailed warranty terms and conditions, please refer to the official Horizon Hobby website or contact their customer support. Proof of purchase may be required for warranty claims.

10. Tallafin Abokin Ciniki

For technical assistance, spare parts, or further information regarding your E-flite Carbon-Z Cessna 150, please visit the official E-flite or Horizon Hobby website. You can also contact their customer service department directly for support.

E-flite Store: Visit the E-flite Store on Amazon