Gabatarwa
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
Umarnin Tsaro
Gargadin Tsaro na Kayan Wuta na Gabaɗaya:
- Tsaron Yankin Aiki: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Tsaron Wutar Lantarki: Guji cudanya jiki tare da ƙasa ko ƙasa kamar bututu, radiators, jeri, da firiji. Akwai ƙarin haɗarin girgiza wutar lantarki idan jikinka na ƙasa ko ƙasa.
- Tsaro na Keɓaɓɓen: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Amfani da Kayan Aikin Wuta da Kulawa: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- Kulawa: Kula da kayan aikin wuta da na'urorin haɗi. Bincika rashin daidaituwa ko ɗaure sassa masu motsi, karyewar sassa, da kowane yanayin da zai iya shafar aikin kayan aikin wutar lantarki.
Specific Circular Saw Safety Warnings:
- Tsare hannaye daga yankan yanki da ruwa. Kada ku isa ƙarƙashin kayan aikin.
- Daidaita zurfin yankan to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- Kada a taɓa amfani da lallausan wanki ko ƙuƙumman ruwa mara kyau ko kuskure.
Samfurin Ƙarsheview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
Mabuɗin Abubuwan:
- Babban Hannu: Ergonomic grip for primary control and operation.
- Hannun taimako: Provides additional stability and control during cutting.
- Kunnawa/Kashewa: Yana kunnawa kuma yana kashe injin.
- Kulle Spindle: Button used to lock the spindle for safe and easy saw blade changes.
- Tsaron Ruwa: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- Lever Daidaita Zurfi: Mechanism for setting the desired cutting depth.
- Lever Daidaita Bevel: Mechanism for setting the desired cutting angle for bevel cuts.
- Saw Blade: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Dust Extraction Adapter: Port for connecting a dust collection system to minimize sawdust.
- Battery Pack Receptacle: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
Saita
1. Shigar da Baturi
Ensure the tool is switched off before installing or removing the battery pack.
- Align the battery pack with the receptacle on the tool.
- Slide the battery pack into the receptacle until it clicks securely into place.
- To remove, press the release button on the battery pack and slide it out.
2. Saw Blade Installation
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- Latsa ka riƙe maɓallin makullin sandal don hana ruwa daga juyawa.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- Remove the outer flange and the old saw blade.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. Daidaita Zurfin Yanke
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- Sauke lever daidaitawa zurfin.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Tighten the depth adjustment lever securely to lock the setting.
4. Daidaita Ƙaƙwalwar Bevel
The saw can make bevel cuts up to 45 degrees for angled cuts.
- Sake madaidaicin lever.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
Umarnin Aiki
1. Farawa da Tsayawa
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. Yin Yanke
- Ajiye kayan aikin da ƙarfi tare da clamps don hana motsi yayin yankan.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Start the saw and allow the blade to reach full speed before engaging the material.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. Cirar Kura
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
Kulawa
Tsaftacewa
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
Kula da ruwa
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
Adana
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Saw baya farawa | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| Saw cuts slowly or binds | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| Yawan girgiza | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| Ingancin yanke mara kyau (m gefuna, splintering) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
Ƙayyadaddun bayanai
- Samfura: Einhell TE-CS 18/165-1 Li-Solo
- Voltage: 18 V (Battery Operated)
- Gudun rashin kaya: 4,200 rpm
- Diamita Tsawon Wuta: mm165 ku
- Arbor Hole Diameter: mm20 ku
- Max. Cutting Depth (90°): Kimanin mm 54
- Max. Cutting Depth (45°): Kimanin mm 35
- Nauyin Abu: 2.72kg (ba tare da baturi ba)
- Abun Ruwa: Karfe Mai Girma
- Yawan Hakora: 24
- Siffa ta Musamman: Mara waya aiki
- Abubuwan da aka haɗa: Ganin Blade
- Lura: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
Garanti da Taimako
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
