1. Gabatarwa
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 89mm Cordless Mini Circular Saw TE-CS 18/89 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This cordless mini circular saw is designed for making straight cuts in wood, panels, parquet, and various other materials.
Figure 1: The Einhell Power X-Change 89mm Cordless Mini Circular Saw. The tool features a red and black ergonomic handle, a grey base plate, and an exposed saw blade. A slot for a Power X-Change battery is visible at the top. The saw is accompanied by two saw blades and a rip fence accessory.
2. Umarnin Tsaro
Always observe basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Familiarize yourself with all safety warnings and instructions.
Gargadin Tsaro na Kayan Wuta na Gabaɗaya:
- Tsaron Yankin Aiki: Kiyaye yankin aikinku tsabta da haske sosai. Wurare masu duhu ko duhu suna kiran haɗari. Kada a yi amfani da kayan aikin wuta a cikin abubuwan fashewa, kamar a gaban ruwa mai ƙonewa, gas, ko ƙura.
- Tsaron Wutar Lantarki: Guji cudanya jiki tare da ƙasa ko ƙasa kamar bututu, radiators, jeri, da firiji. Akwai ƙarin haɗarin girgiza wutar lantarki idan jikinka na ƙasa ko ƙasa.
- Tsaro na Keɓaɓɓen: Always wear eye protection. Use safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection when appropriate. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Amfani da Kulawa: Do not force the power tool. Use the correct power tool for your application. It will do the job better and safer at the rate for which it was designed. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Sabis: ƙwararren mai gyara ya yi amfani da kayan aikin wutar lantarki ta amfani da sassa iri ɗaya kawai. Wannan zai tabbatar da cewa an kiyaye amincin kayan aikin wutar lantarki.
3. Abubuwan Kunshin
Upon unpacking, please ensure all items are present and undamaged. If any parts are missing or damaged, contact your retailer.
- Einhell Power X-Change 89mm Cordless Mini Circular Saw TE-CS 18/89 Li Solo
- Carbide Saw Blade (89mm diameter)
- Rip Fence
- Adaftar Mai Tsaftace Wuta
- Jagoran Jagora
Note: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change series.
4. Samfurin Ya Ƙareview da kuma abubuwan da aka gyara
Familiarize yourself with the various parts of your mini circular saw:
- Handle/Motor Housing: Ergonomic grip for control and houses the motor.
- Interface na baturi: Slot for Einhell Power X-Change 18V battery.
- Saw Blade: 89mm diameter carbide blade for cutting.
- Base Plate (Aluminum Saw Table): Provides stability and guides the saw during cuts.
- Cutting Depth Adjustment: Mechanism to set the desired cutting depth.
- Kulle Spindle: Button to lock the spindle for easy blade changes.
- Rip Fence Guide: Slot for attaching the rip fence for parallel cuts.
- Vacuum Cleaner Adapter Port: Connection point for a dust extraction system.
5. Saita
5.1. Shigar da Baturi
- Tabbatar da cikakken cajin baturi kafin amfani.
- Align the battery pack with the battery interface on the saw.
- Slide the battery into the interface until it clicks securely into place.
- Don cirewa, danna maɓallin sakin da ke kan batirin sannan ka zame shi waje.
5.2. Saw Blade Installation/Change
Always disconnect the battery before changing the saw blade.
- Latsa ka riƙe maɓallin makullin sandal don hana ruwa daga juyawa.
- Use the provided wrench (if applicable) to loosen the blade retaining screw.
- Remove the old blade and ensure the new blade is clean and undamaged.
- Place the new 89mm carbide saw blade onto the spindle, ensuring the rotation direction arrows on the blade match the direction arrow on the saw's housing.
- Securely tighten the blade retaining screw while holding the spindle lock. Do not overtighten.
5.3. Attaching the Rip Fence
The rip fence assists in making straight, parallel cuts.
- Slide the rip fence into the guide slot on the base plate.
- Adjust the fence to the desired cutting width.
- Tighten the locking screw to secure the rip fence in position.
5.4. Connecting the Vacuum Adapter
For a cleaner work environment, connect a vacuum cleaner to the adapter port.
- Attach the vacuum cleaner adapter to the dust extraction port on the saw.
- Haɗa bututun tsabtace injin da ya dace da adaftar.
6. Aiki
6.1. Daidaita Zurfin Yanke
The cutting depth can be adjusted easily and without tools.
- Loosen the depth adjustment lever/knob.
- Move the base plate up or down to achieve the desired cutting depth. The maximum cutting depth is 28mm.
- Securely tighten the depth adjustment lever/knob to lock the setting.
6.2. Yin Yanke
Koyaushe tabbatar da workpiece amintacce clamped and stable before cutting.
- Set the desired cutting depth and attach the rip fence if needed.
- Position the saw on the workpiece, ensuring the blade is clear of the material before starting.
- Press the ON/OFF switch to start the saw. Allow the blade to reach full speed before engaging the material.
- Guide the saw smoothly and steadily through the material. Do not force the tool.
- Once the cut is complete, release the ON/OFF switch and wait for the blade to stop completely before lifting the saw from the workpiece.
7. Kulawa
Kulawa na yau da kullun yana tabbatar da kyakkyawan aiki kuma yana tsawaita rayuwar kayan aikin ku.
- Tsaftacewa: After each use, clean the tool housing, base plate, and blade guard with a soft, damp cloth. Remove any sawdust or debris from the ventilation slots. Do not use harsh chemicals or abrasive cleaners.
- Duban Ruwa: Regularly inspect the saw blade for sharpness, damage, or missing teeth. Replace dull or damaged blades immediately to ensure clean cuts and prevent strain on the motor.
- Kulawar Baturi: Store batteries in a cool, dry place. Do not expose them to extreme temperatures.
- Babban Dubawa: Check all screws and fasteners periodically to ensure they are tight.
8. Shirya matsala
Wannan sashe yana magance batutuwan gama gari da zaku iya fuskanta.
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Saw baya farawa | Ba a shigar da baturi daidai ko cire shi ba. | Tabbatar an shigar da baturi cikakke kuma ya yi caji. |
| Poor cutting performance / Rough cuts | Dull or damaged saw blade. Incorrect cutting depth. | Replace saw blade. Adjust cutting depth appropriately for the material. |
| Saw stops during operation | Overload or battery discharged. | Reduce cutting pressure. Recharge or replace battery. |
| Depth adjuster becomes loose | Locking mechanism not fully tightened. | Ensure the depth adjustment lever/knob is securely tightened after setting the depth. |
9. Ƙayyadaddun bayanai
- Samfura: TE-CS 18/89 Li Solo
- Voltage: 18V (Power X-Change system)
- Diamita Tsawon Wuta: mm89 ku
- Max. Zurfin Yanke: mm28 ku
- Saw Table Material: High-quality Aluminum
10. Garanti da Tallafawa
Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your purchase or visit the official Einhell website.
For technical support, spare parts, or service inquiries, please contact your authorized Einhell dealer or the Einhell customer service department. Contact information can typically be found on the Einhell webshafin ko a cikin takaddun samfuran ku.
