Hanwha Techwin HCP-6320HA Full-HD 2MP Analog HD PTZ Dome Camera User Manual

Gabatarwa

This manual provides essential instructions for the installation, operation, and maintenance of your Hanwha Techwin HCP-6320HA Full-HD 2MP Analog HD PTZ Dome Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

Bayanin Tsaro

• Installation must be performed by qualified personnel in accordance with all local codes and regulations.
• Ensure the power supply (24V AC) matches the camera's requirements. Disconnect power before any installation or maintenance procedures.
• Do not expose the camera to extreme temperatures, humidity, or corrosive environments beyond its specified operating conditions.
• Avoid direct exposure of the lens to strong light sources, as this may damage the image sensor.
• This product is designed for outdoor use with IP66 weather protection and IK10 vandal resistance.

Abubuwan Kunshin

Tabbatar cewa duk abubuwan da aka gyara suna nan a cikin kunshin ku:

• HCP-6320HA PTZ Dome Camera
• Jagorar mai amfani (wannan takarda)
• Mounting hardware (if included in standard package)

Samfurin Ƙarsheview

The Hanwha Techwin HCP-6320HA is a high-performance Full-HD 2MP Analog HD PTZ (Pan-Tilt-Zoom) dome camera designed for outdoor surveillance. It features a powerful 32x optical zoom lens (4.44-142.6mm), Day & Night functionality with an IR Cut Filter (ICR), Wide Dynamic Range (WDR 120dB), and advanced noise reduction (SSNRIII).

Hoto na 1: Gaba view of the Hanwha Techwin HCP-6320HA PTZ Dome Camera. The camera features a white dome housing with a clear protective bubble covering the lens assembly. The "Wisenet" logo is visible on the upper part of the dome.

Mabuɗin Siffofin

• 2 Megapixel (1920 x 1080) Full HD Resolution
• 1/2.8" CMOS Sensor
• 32x Optical Zoom (4.44 ~ 142.6mm)
• Day & Night (ICR) and Defog functions
• WDR (120dB) and SSNRIII (Digital Noise Reduction)
• High-speed Pan/Tilt: 700°/sec preset speed
• IP66 Weatherproof and IK10 Vandal-Proof ratings
• Analog HD (AHD/TVI/CVI/CVBS selectable) video output
• RS-485 and Coaxitron (Up the Coax) control

Saita da Shigarwa

Hawan Kamara

The HCP-6320HA is designed for wall mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 7 lbs) and any associated cabling.

1. Zaɓi wurin hawa mai dacewa wanda ke samar da filin da ake so na view and is within reach of power and video cables.
2. Use the provided mounting template (if applicable) to mark drilling points for the mounting bracket.
3. Drill pilot holes and secure the mounting bracket to the surface using appropriate screws and anchors.
4. Attach the camera to the mounting bracket, ensuring it is firmly secured.

Haɗin Waya

The camera requires a 24V AC power supply and uses wired connectivity for video and control.

1. Haɗin Wuta: Connect the 24V AC power supply to the camera's power input. Ensure correct polarity.
2. Fitowar Bidiyo: Connect the analog HD video output (BNC connector) to your DVR or video monitoring system. The camera supports various analog HD formats (AHD, TVI, CVI) and CVBS, which can typically be selected via the OSD menu or DIP switches.
3. Control (Optional): For PTZ control, connect the RS-485 communication lines (Tx+/Tx-) to your DVR or PTZ controller. Alternatively, Coaxitron (Up the Coax) control can be used if supported by your DVR, eliminating the need for separate RS-485 wiring.

Tsarin Farko

After physical installation and wiring, power on the camera. Access the camera's On-Screen Display (OSD) menu via your DVR or controller to configure settings such as video format, PTZ protocols, and image adjustments.

Aiki da Kamara

Pan, Tilt, and Zoom (PTZ) Control

The HCP-6320HA offers precise PTZ control, allowing you to remotely adjust the camera's viewing angle and zoom level.

• Kwana: Rotate the camera horizontally (360° continuous).
• Kwana: Adjust the camera vertically.
• Zuƙowa: Use the 32x optical zoom to magnify distant objects.
• Mayar da hankali: The camera typically features auto-focus, but manual focus may be available via the OSD menu.

Preset and Tour Functions

Configure specific camera positions (presets) and sequences of presets (tours) for automated surveillance.

• Saita Saita: Move the camera to the desired position, zoom, and focus, then save it as a preset through your DVR or controller interface. The camera supports high-speed preset recall.
• Running Tours: Create a tour by linking multiple presets in a specific order and duration.

Saitunan Hoto

Adjust various image parameters through the OSD menu to optimize video quality for different lighting conditions.

• WDR (Yanayin Dynamic Range): Improves visibility in scenes with both very bright and very dark areas.
• Rana da Dare: Automatically switches between color (day) and black & white (night) modes, utilizing the IR Cut Filter (ICR).
• SSNRIII: Reduces digital noise in low-light conditions.
• Defog: Enhances image clarity in foggy or hazy environments.

Kulawa

Tsaftacewa

• Regularly clean the camera's dome cover with a soft, damp zane don cire ƙura da datti. A guji wanke-wanke da goge-goge.
• Ensure the lens is free from smudges or obstructions for clear image quality.

Sabunta Firmware

Periodically check the Hanwha Techwin website for firmware updates. Firmware updates can improve performance, add new features, or address security vulnerabilities. Follow the manufacturer's instructions carefully when performing updates.

Shirya matsala

Matsalolin gama gari da Mafita

Ƙayyadaddun bayanai

Garanti da Taimako

For warranty information and technical support, please refer to the official Hanwha Techwin webshafin yanar gizo ko tuntuɓi dillalin da aka ba ku izini. Ajiye rasitin siyan ku don neman garanti.