Candy PLE 64 X 4-Burner Built-in Ceramic Electric Cooktop Instruction Manual

1. Gabatarwa

This manual provides essential information for the safe and efficient use, installation, and maintenance of your Candy PLE 64 X 4-burner built-in ceramic electric cooktop. Please read these instructions carefully before using the appliance and keep them for future reference.

2. Bayanin Tsaro

Koyaushe ku bi waɗannan matakan tsaro don hana rauni ko lalacewar na'urar.

• Tabbatar cewa ƙwararren ma'aikacin fasaha ne ya shigar da na'urar bisa ga ƙa'idodin yankin.
• Do not operate the cooktop if the ceramic surface is cracked or broken. Disconnect from power immediately.
• Keep children away from the appliance during operation and when it is cooling down. The surface remains hot after use.
• Do not use abrasive cleaning agents or sharp metal scrapers to clean the cooktop, as they can scratch the surface.
• Never leave cooking unattended, especially when using high heat settings.
• Ensure adequate ventilation in the kitchen during use.
• Kada a adana kayan wuta kusa da saman dafa abinci.
• Cire haɗin na'urar daga wutar lantarki kafin kowane tsaftacewa ko kulawa.

3. Shigarwa

The Candy PLE 64 X cooktop is designed for drop-in installation into a kitchen countertop. Professional installation is recommended.

3.1 Girma da Yankewa

Refer to the diagram below for precise dimensions and the required countertop cut-out measurements.

Hoto na 1: Installation diagram showing the cooktop dimensions (585x500mm) and the required countertop cut-out (560x480mm), with a depth of 35mm and a minimum clearance of 8mm below.

• Girman samfur: 51 cm (Depth) x 9 cm (Height) x 61 cm (Width)
• Yanke Girma: Approximately 56 cm (Width) x 48 cm (Depth)
• Ensure sufficient space for ventilation around the appliance.

3.2 Haɗin Wutar Lantarki

The appliance requires a 220 Volt electrical supply. The electrical connection must be performed by a qualified electrician, ensuring compliance with all local electrical codes and regulations.

• Verify that the household electrical system can support the cooktop's power requirements.
• Install an accessible disconnect switch or circuit breaker near the appliance.

4. Umarnin Aiki

Your Candy PLE 64 X cooktop features four ceramic heating elements controlled by rotary knobs.

4.1 Sarrafa panelview

Hoto na 2: Control panel featuring four rotary knobs for individual burner control.

Each knob corresponds to a specific heating zone. The symbols around the knobs indicate the power levels or functions.

4.2 Turning On and Adjusting Heat

1. Place a suitable cooking pot or pan on the desired ceramic heating zone.
2. Turn the corresponding rotary knob clockwise to the desired heat setting. The settings typically range from minimum (low heat) to maximum (high heat).
3. The heating element will begin to heat up. An indicator light may illuminate to show that the zone is active.

4.3 Kashewa

To turn off a heating zone, rotate its knob counter-clockwise until it clicks into the 'off' position. The indicator light will extinguish.

4.4 Rago Mai Nuna Heat

After turning off a heating zone, the ceramic surface will remain hot for some time. Many ceramic cooktops include a residual heat indicator (often an 'H' symbol) that stays lit until the surface temperature drops to a safe level. Exercise caution when cleaning or touching the cooktop after use.

5. Tsaftacewa da Kulawa

Tsaftacewa da kulawa akai-akai zai tabbatar da tsawon rai da kuma ingantaccen aikin girkin ku.

• Tsaftace Kullum: After each use, once the cooktop has cooled down, wipe the ceramic surface with a damp cloth and a small amount of mild dish soap. Rinse thoroughly and dry with a clean cloth to prevent water spots.
• Tabon Taurin kai: For burnt-on food or stubborn stains, use a specialized ceramic hob cleaner and a non-abrasive scraper designed for ceramic surfaces. Follow the product instructions carefully.
• Guji: Do not use abrasive sponges, scouring pads, harsh chemicals, or steam cleaners, as these can damage the ceramic surface.
• Maƙallan Sarrafa: The control knobs can be removed for cleaning. Wipe them with a damp cloth and dry thoroughly before reattaching.
• Dubawa: Periodically inspect the cooktop for any signs of damage, especially to the ceramic surface or electrical connections. If damage is found, contact a qualified technician.

6. Shirya matsala

Kafin tuntuɓar sabis na abokin ciniki, sakeview abubuwan gama gari masu zuwa da hanyoyin magance su.

7. Bayanan fasaha

8. Garanti da Tallafawa

For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support or service inquiries, please contact Candy customer service or an authorized service center.

Ajiye rasidin siyan ku azaman shaidar siyan don da'awar garanti.