OEDRO Running Boards Instruction Manual

1. Gabatarwa

This manual provides detailed instructions for the installation, operation, and maintenance of your OEDRO Armored Pedal Running Boards. Please read this manual thoroughly before installation and use to ensure proper fitment and safe operation. These running boards are designed to provide convenient entry and exit for your vehicle while offering side protection.

2. Daidaituwa

These running boards are compatible with the following vehicle models:

• 2019-2025 Chevy Silverado 1500 Crew Cab
• 2019-2025 GMC Sierra 1500 Crew Cab
• 2020-2025 Chevy Silverado 2500HD 3500HD Crew Cab
• 2020-2025 GMC Sierra 2500HD 3500HD Crew Cab

Lura: Excludes 2019 1500 LD/Limited models. Please verify your vehicle's cab size to ensure proper fitment.

3. Abubuwan Kunshin

Da fatan za a tabbatar da duk abubuwan da aka gyara suna nan kafin fara shigarwa:

• 2 x Running Boards
• Complete set of Mounting Brackets
• All necessary Hardware (bolts, washers, nuts)
• DIY Instruction Manual (this document)

4. Saita da Shigarwa

Installation is a bolt-on process and typically requires general garage tools. No drilling or cutting is required for most models. For models from 2017 and later, trimming may be needed on the plastic DEF tank cover.

4.1 Matakai Kafin Shigarwa

1. Cire duk abubuwan da aka gyara kuma tabbatar da jerin abubuwan da ke cikin kunshin.
2. Identify the mounting points on your vehicle's frame. These are typically pre-drilled holes covered by plastic plugs. Remove any plastic plugs from the mounting holes.
3. Familiarize yourself with the mounting brackets. Note that brackets are not pre-welded to the step bars.

4.2 Shigar da Bracket

1. Attach the appropriate mounting brackets to the vehicle's frame using the provided hardware. Ensure the bolts are finger-tight only at this stage don ba da damar daidaitawa.
2. Repeat for all mounting points on both the driver and passenger sides.

4.3 Haɗe-haɗen Hukumar Gudu

1. Carefully position the running board onto the installed brackets.
2. Secure the running board to the brackets using the remaining hardware. Again, keep bolts finger-tight.

4.4 Final Adjustment and Tightening

1. Adjust the running boards to your desired position, ensuring they are level and properly aligned with the vehicle.
2. Once satisfied with the alignment, fully tighten all bolts on the brackets and running boards. Do not overtighten.

4.5 Bidiyon Shigarwa

For a visual guide, please refer to the following installation videos:

5. Umarnin Aiki

To use the running boards, simply step onto the textured surface when entering or exiting your vehicle. The wide step area and slip-proof design provide a secure footing.

6. Kulawa

To maintain the appearance and longevity of your OEDRO running boards:

• Regularly clean the running boards with mild soap and water to remove dirt, mud, and road salt.
• Inspect all mounting hardware periodically for tightness. Retighten if necessary.
• The durable powder coating provides protection against rust and corrosion. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.

7. Shirya matsala

• Rashin Lafiya: If the running boards feel loose, check all mounting bolts and ensure they are securely tightened. Over time, vibrations can cause bolts to loosen.
• Hayaniyar da ba ta saba ba: Rattling or squeaking noises may indicate loose hardware or improper installation. Re-inspect all connection points and tighten as needed.
• Surface Wear/Rust: While designed for rust resistance, extreme conditions or damage to the coating can lead to wear. Clean the affected area and apply a rust-inhibiting paint if necessary.

8. Ƙayyadaddun bayanai

9. Garanti

This product comes with a 1-year manufacturer's warranty. For warranty claims or further inquiries, please refer to the customer support information.

10. Tallafin Abokin Ciniki

Should any inquiries arise regarding your OEDRO Running Boards, please feel free to contact us directly through the retailer's customer service channels. We are committed to providing assistance and ensuring your satisfaction.