Hecht Professional Pillar Drill 600W - Instruction Manual

1. Muhimman Umarnin Tsaro

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when operating power tools. Read all instructions carefully before use.

• Tsaron Yankin Aiki: Kiyaye yankin aikinku tsabta da haske sosai. Wurare masu duhu ko duhu suna kiran haɗari. Kada a yi amfani da kayan aikin wuta a cikin abubuwan fashewa, kamar a gaban ruwa mai ƙonewa, gas, ko ƙura.
• Tsaron Wutar Lantarki: Dole ne toshewar kayan aikin wutar lantarki ta dace da wurin fitar da wutar lantarki. Kada a taɓa gyara toshewar ta kowace hanya. A guji taɓa jiki da saman ƙasa ko na ƙasa kamar bututu, radiators, range, da firiji.
• Tsaro na Keɓaɓɓen: Always wear eye protection. Use hearing protection when operating for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Amfani da Kulawa: Kar a tilasta kayan aikin wutar lantarki. Yi amfani da madaidaicin kayan aikin wuta don aikace-aikacenku. Cire haɗin filogi daga tushen wutar lantarki kafin yin kowane gyare-gyare, canza kayan haɗi, ko adana kayan aikin wuta.
• Kulawa: Kula da kayan aikin wuta. Bincika don daidaitawa ko ɗaurawar sassan motsi, karyewar sassan, da duk wani yanayin da zai iya shafar aikin kayan aikin wutar. Idan lalacewa, sa kayan wuta a gyara kafin amfani.

2. Samfurin Ya Ƙareview da kuma abubuwan da aka gyara

The Hecht Professional Pillar Drill is designed for precise drilling operations. Familiarize yourself with its main components for safe and effective use.

• Gidajen Motoci: Contains the 600W motor and belt drive system.
• Shugaban Majalisar: Includes the chuck, spindle, and depth stop.
• Rukunin: The main support structure for the head assembly and drilling table.
• Drilling Table: Adjustable in height and angle for versatile drilling.
• Farantin gindi: Provides stability and features mounting slots for securing to a workbench.
• Caku: Holds the drill bits securely (3-16 mm capacity).
• Speed Adjustment Lever: Used to change the drilling speed.
• Feed Handles: Used to lower the chuck and drill bit into the workpiece.
• Kunnawa/Kashewa: Power control for the drill.
• Chip Protection Guard: Transparent guard for safety during operation.

3. Saita da Majalisa

Follow these steps to assemble and set up your pillar drill before initial use.

1. Cire kaya: A hankali cire duk abubuwan da aka gyara daga marufi. Bincika kowane lalacewa ko ɓarna.
2. Shigar da Farantin Tusa: Place the base plate on a stable, level workbench. Secure it using appropriate bolts through the elongated slots on the base.



3. Column Assembly: Mount the column securely onto the base plate according to the provided hardware.
4. Drilling Table Attachment: Slide the drilling table assembly onto the column. Adjust its height and secure it with the locking handle.
5. Head Assembly Mounting: Carefully place the head assembly onto the top of the column and secure it.
6. Shigarwa na Chuck: Insert the chuck onto the spindle taper. Use a rubber mallet to gently tap it into place, ensuring a firm fit.
7. Chip Guard: Attach the transparent chip protection guard around the chuck area.

4. Umarnin Aiki

Understand how to properly operate your pillar drill for optimal performance and safety.

4.1 Selecting Drill Bits

Choose the appropriate drill bit for the material and desired hole size. The chuck accommodates bits from 3 mm to 16 mm. Ensure the drill bit is sharp and free from damage.

4.2 Installing Drill Bits

1. Ensure the drill is unplugged.
2. Open the chuck jaws using the chuck key.
3. Insert the drill bit into the chuck, ensuring it is centered and seated firmly.
4. Tighten the chuck jaws securely with the chuck key. Remove the chuck key immediately after tightening.

4.3 Daidaita Gudun

The drill features 12 speed settings, adjustable via a belt drive system. Select the speed appropriate for your material and drill bit size. Lower speeds are generally for larger bits and harder materials, while higher speeds are for smaller bits and softer materials.

4.4 Adjusting Drilling Table

The drilling table can be adjusted in height and tilted up to +/- 45 degrees. Loosen the locking handle, position the table as required, and then securely tighten the handle.

4.5 Saita Zurfin Hakowa

Use the depth stop mechanism to set the desired drilling depth. This ensures consistent hole depths for repetitive tasks.

4.6 Hanyar Hakowa

1. Secure the workpiece firmly to the drilling table using clamps or a vise. Never hold the workpiece by hand.
2. Adjust the table height and angle, and set the drilling depth.
3. Zaɓi saurin da ya dace.
4. Turn on the drill using the On/Off switch.
5. Slowly lower the drill bit into the workpiece using the feed handles, applying steady, even pressure.
6. Da zarar zurfin da ake so ya kai, janye bit ɗin rawar soja daga aikin aikin.
7. Kashe rawar jiki.

5. Kulawa

Regular maintenance ensures the longevity and safe operation of your pillar drill.

• Tsaftacewa: After each use, clean the drill of dust and chips. Use a brush or compressed air. Do not use solvents that may damage plastic parts.
• Lubrication: Periodically lubricate moving parts such as the column, spindle, and depth stop mechanism with light machine oil.
• Tashin Belt: Check the tension of the drive belt regularly. Adjust if necessary to prevent slippage and ensure proper power transmission. Refer to the belt diagram inside the motor housing cover.
• Chuck Maintenance: Keep the chuck jaws clean and free of debris. If the chuck becomes stiff, clean and lightly lubricate it.
• Lantarki Igiyar: Inspect the power cord for any damage. Replace if frayed or cut.

6. Shirya matsala

This section addresses common issues you might encounter with your pillar drill.

7. Ƙayyadaddun bayanai

Technical data for the Hecht Professional Pillar Drill.

8. Garanti da Tallafawa

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. For technical support or spare parts inquiries, please contact Hecht customer service or your authorized dealer.

Please have your model number (Standbohrmaschine Hecht) and reference number (8595614925655) available when contacting support.