THOMSON TT700 Premium Turntable User Manual

1. Gabatarwa

Na gode da siyaasing the THOMSON TT700 Premium Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable. Please read this manual thoroughly before use and retain it for future reference.

The TT700 is designed to deliver a high-quality vinyl listening experience, featuring a belt-drive system, an AT91 Audio Technica cartridge, adjustable counterweight, and antiskating control.

2. Muhimman Bayanan Tsaro

• Tushen wutar lantarki: Ensure the turntable is connected to a 230V AC power supply.
• Wuri: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive dust or vibrations.
• Danshi: Do not expose the unit to rain, moisture, or liquids.
• Samun iska: Kada a toshe wuraren samun iska.
• Tsaftacewa: Disconnect the power before cleaning. Use a soft, dry cloth. Avoid abrasive cleaners.
• Hidima: Kada ka yi ƙoƙarin gyara na'urar da kanka. Ka miƙa duk wani sabis ga ma'aikata masu ƙwarewa.
• Yara: Keep out of reach of children. Small parts could be a choking hazard.

3. Abubuwan Kunshin

Tabbatar cewa duk waɗannan abubuwa suna cikin kunshin ku:

• THOMSON TT700 Turntable Unit
• Platter
• Dust Cover (Removable Transparent Cover)
• AT91 Audio Technica Cartridge (pre-installed or separate)
• Ma'aunin nauyi
• Slipmat
• RCA Audio Cable
• RCA to AUX-IN 3.5mm Adapter
• Power Adapter (230V Mains Power Supply)
• Jagorar mai amfani (wannan takaddar)

4. Samfurin Ya Ƙareview

Familiarize yourself with the components of your TT700 turntable:

5. Saita Umarnin

5.1 Cire kaya da Sanyawa

1. A hankali cire duk abubuwan da aka gyara daga marufi.
2. Place the turntable on a flat, stable, and level surface.
3. Install the transparent dust cover by aligning its hinges with the slots at the back of the turntable.

5.2 Platter and Belt Installation

1. Place the platter onto the center spindle.
2. Locate the drive belt (usually pre-installed on the underside of the platter or around the motor pulley). If not pre-installed, carefully stretch the belt around the motor pulley and the inner rim of the platter.
3. Place the slipmat on top of the platter.

5.3 Cartridge and Tonearm Setup

The AT91 Audio Technica cartridge is typically pre-installed. If not, follow the cartridge manufacturer's instructions for installation.

1. Balance the Tonearm: Gently remove the stylus protector. While holding the tonearm, rotate the counterweight at the rear until the tonearm floats freely and is perfectly level.
2. Set Tracking Force: Once balanced, hold the counterweight stationary and rotate the numbered ring on the counterweight to '0'. Then, rotate the entire counterweight (including the numbered ring) counter-clockwise to the recommended tracking force for the AT91 cartridge (refer to cartridge specifications, typically 2.0 grams).
3. Set Antiskating: Adjust the antiskating dial (refer to Figure 3) to match the tracking force you set. This helps prevent the stylus from skipping inwards.

5.4 Haɗin Sauti

The TT700 features a pre-amplified output, allowing direct connection to an amplifier ko tsarin sitiriyo.

• Sakamakon RCA: Connect the supplied RCA audio cable from the 'LINE/PHONO OUT' jacks on the turntable to the corresponding 'LINE IN' or 'AUX IN' jacks on your amplasifika masu ƙarfi ko masu ƙarfi.
• AUX-IN 3.5mm: If your audio system only has a 3.5mm AUX-IN, use the supplied RCA to AUX-IN 3.5mm adapter.

5.5 Haɗin Wuta

1. Connect the power adapter to the DC input jack on the turntable.
2. Plug the power adapter into a suitable 230V AC wall outlet.

6. Umarnin Aiki

6.1 Playing a Record

1. Place a vinyl record on the platter, centered on the spindle.
2. Select the correct playback speed (33 or 45 RPM) using the speed selector switch (refer to Figure 4). For 45 RPM records, you may need a 45 RPM adapter (not included).
3. Move the tonearm lift lever to the 'UP' position to raise the tonearm.
4. Gently move the tonearm over the desired starting groove of the record.
5. Lower the tonearm lift lever to the 'DOWN' position to slowly lower the stylus onto the record. Playback will begin.
6. Use the 'Start/Stop' button to initiate or pause platter rotation.

6.2 Adjusting Pitch

The TT700 features a Pitch Control knob. This allows for fine adjustment of the playback speed.

• Rotate the 'PITCH CONTROL' knob clockwise to slightly increase the playback speed or counter-clockwise to decrease it.

6.3 Stopping Playback and Automatic Return

1. At the end of a record, the tonearm will automatically return to its rest position.
2. To stop playback manually, move the tonearm lift lever to the 'UP' position, then gently guide the tonearm back to its rest.
3. Switch the speed selector to 'OFF' to power down the unit.

7. Kulawa

7.1 Cleaning the Stylus

A clean stylus ensures optimal sound quality and extends record life.

• Use a soft stylus brush, brushing gently from back to front (in the direction of the tonearm).
• Do not use excessive force or brush from side to side.

7.2 Cleaning the Turntable

• Wipe the turntable cabinet and dust cover with a soft, dry, lint-free cloth.
• Avoid using harsh chemicals or abrasive cleaners, as they can damage the finish.

8. Shirya matsala

9. Ƙayyadaddun bayanai

• Sunan Samfura: TT700
• Alamar: THOMSON
• Launi: Baki
• Nau'in Tuƙi: Belt Drive
• Gudu: 33 1/3 RPM, 45 RPM
• Harsashi: AT91 Audio Technica
• Siffofin: Adjustable Counterweight, Antiskating, Pitch Control, Automatic Tonearm Return, Pre-ampingantacce
• Haɗin kai: RCA Line/Phono Output, Auxiliary (via RCA to 3.5mm adapter)
• Na'urori masu jituwa: Headphones (via connected ampmai ɗaukar kaya/mai karɓar kaya)
• Abu: Vinyl (referring to the product's primary use, not construction material)
• Nauyin Abu: 4 kilogiram
• Tushen wutan lantarki: 230V AC

10. Garanti da Tallafawa

For warranty information, please refer to the warranty card included with your product or visit the official THOMSON website. For technical support or service inquiries, please contact THOMSON customer service through their official channels.