1. Gabatarwa
This manual provides essential information for the safe and effective use of your Ortis Refrigerator Surge Protector. This device is designed to safeguard your refrigerator and other home appliances from various electrical irregularities, including high and low voltage, spikes, instant surges, power failures, voltage fluctuations, brownouts, and load shedding. Please read this manual thoroughly before installation and operation.
2. Bayanin Tsaro
- Tsaron Wutar Lantarki: Always ensure the power outlet is properly grounded and rated for the device's specifications (120V/15A 60Hz).
- Amfanin Cikin Gida Kawai: This surge protector is intended for indoor use in dry locations. Do not expose it to moisture or extreme temperatures.
- Daidaituwar Kayan Aiki: Connect only appliances within the specified voltage and current limits. Do not overload the protector.
- Dubawa: Regularly inspect the surge protector and its connected cables for any signs of damage. Discontinue use if damage is observed.
- Yara da Dabbobi: A kiyaye na'urar daga wurin yara da dabbobin gida.
- Bazu: Do not attempt to open or modify the surge protector. Refer all servicing to qualified personnel.
3. Kayan Samfura
The Ortis Refrigerator Surge Protector is equipped with several features designed for optimal appliance protection:
- Cikakken Kariya: Guards against high and low voltage, spikes, instant surges, power failures, voltage fluctuations, brownouts, and load shedding.
- Shafukan Biyu: Features two outlets, allowing protection for two appliances simultaneously, such as a refrigerator and a microwave, or a water cooler.
- Alamar LED: Clear LED lights indicate the current voltage status (Normal, High Voltage, Low Voltage) and the active delay period.
- 3-Minute Time Delay: After a power fluctuation, the device initiates a 3-minute delay before re-establishing power. This ensures voltage stability and prevents damage from rapid power cycling.
- Tsara-da-Wasa: Simple installation without complex wiring.
- Zane-zane na Ajiye sararin samaniya: An ƙera shi don kar a toshe hanyoyin da ke kusa.
Hoto na 3.1: Ƙarsheview of the Ortis Refrigerator Surge Protector and its key features.
4. Saita da Shigarwa
Follow these steps to properly install your Ortis Refrigerator Surge Protector:
- Shirya: Carefully remove the surge protector from its packaging.
- Duba: Check the device for any visible damage. Do not use if damaged.
- Gano Wuri: Choose a standard 120V/15A wall outlet that is easily accessible and not shared with other high-power appliances.
- Plug In Protector: Insert the Ortis Refrigerator Surge Protector directly into the wall outlet. Ensure it is firmly seated.
- Haɗa Kayan Aiki: Plug your refrigerator and/or other compatible appliances (up to two) into the outlets on the surge protector. Ensure appliance plugs are in good condition.
- Hawa (Na zaɓi): The unit can be mounted to the wall using screws or an adhesive pad (mounting hardware not included unless specified by manufacturer).
Image 4.1: The Ortis Refrigerator Surge Protector ready for connection to a wall outlet.
Hoto 4.2: Example of the surge protector connected to a refrigerator and another appliance.
5. Umarnin Aiki
Once installed, the Ortis Refrigerator Surge Protector operates automatically. Observe the LED indicators for status information:
- Na al'ada Voltage (Green LED): When the green "Normal Voltage" LED is illuminated, the voltage is within the safe operating range (90VAC to 135VAC), and power is supplied to your appliances.
- Babban Voltage (Red LED): If the red "High Voltage" LED lights up, the input voltage exceeds 135VAC. The protector will automatically cut off power to protect connected appliances.
- Ƙananan Voltage (Red LED): If the red "Low Voltage" LED lights up, the input voltage drops below 90VAC. The protector will automatically cut off power to protect connected appliances.
- Delay Period (Yellow LED): After a power cut-off due to voltage abnormality, or when power is first applied, the yellow "Delay Period" LED will illuminate. This indicates a 3-minute waiting period before power is restored to ensure voltage stability. Do not unplug appliances during this period.
Image 5.1: Explanation of the LED indicators on the surge protector.
6. Kulawa
The Ortis Refrigerator Surge Protector requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- Tsaftacewa: Disconnect the device from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Yanayin Muhalli: Ensure the device is kept in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
- Na'urar USB: A guji lanƙwasawa ko matse igiyar wutar lantarki fiye da kima.
7. Shirya matsala
If you encounter issues with your Ortis Refrigerator Surge Protector, refer to the following common problems and solutions:
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| No power to appliances, no LEDs lit. | Protector not plugged in, wall outlet has no power, or internal fault. | Ensure protector is fully plugged into a live outlet. Test the wall outlet with another device. If still no power, the unit may be faulty. |
| Red "High Voltage" or "Low Voltage" LED is lit, no power to appliances. | Shigar da kunditage is outside safe operating range. | This is normal operation. The protector is safeguarding your appliances. Wait for the voltage to stabilize and the "Delay Period" LED to activate, followed by the "Normal Voltage" LED. |
| Yellow "Delay Period" LED is lit for more than 3 minutes. | Voltage fluctuations are ongoing, or an internal fault. | Ensure the power supply is stable. If the delay persists indefinitely, unplug the protector, wait a few minutes, and plug it back in. If the issue continues, contact customer support. |
| Appliances are not receiving power, but "Normal Voltage" LED is lit. | Appliance issue, or loose connection. | Check if the appliance is properly plugged into the protector. Test the appliance by plugging it directly into a wall outlet (if safe to do so). |
8. Ƙayyadaddun bayanai
- Samfura: B09BN44ZPZ
- Alamar: Ortis
- Girman samfur: 2 x 1 x 1 inci (kimanin)
- Nauyin Abu: 11.3 oz
- Tsawon Kebul: Inci 18.1
- Launi: Lemu
- Jimlar Wutar Wuta: 2
- Voltage Rating: 120V / 15A / 60Hz
- Babban Voltage Yankewa: > 135VAC
- Ƙananan Voltage Yankewa: <90VAC
- Jinkirin Lokaci: 3 minutes
- Kwanan Wata Farko Akwai: 22 ga Agusta, 2021
Image 8.1: Physical dimensions of the Ortis Refrigerator Surge Protector.
9. Garanti da Tallafawa
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Ortis website. Ajiye rasidin siyan ku azaman shaidar siyan.
