SINOTIMER TM618 -7 Days Programmable Weekly Timer Module

1. Sama daview

The SINOTIMER TM618 timer module is designed to automatically control the power supply to various electrical apparatus, such as streetlights, neon signs, billboards, and other appliances, based on a preset time schedule. This digital timer switch features a rechargeable internal battery to maintain program settings during power outage.

Hoto 1.1: Gaba view of the TM618 Timer Module.

2. Mabuɗin Siffofin

• Ƙirƙirar ƙira da sararin samaniya.
• Engineered with advanced digital timing technology.
• High functionality for precise time control.
• Built-in rechargeable battery for program retention.
• Multiple ON/OFF programs for weekly scheduling.

3. Saita da Shigarwa

3.1. Tsarin Waya

Proper wiring is crucial for the safe and correct operation of the TM618 timer module. Refer to the diagram below for connection details. Ensure power is disconnected before performing any wiring.

Figure 3.1: Wiring Terminals and Specifications.

• Input (200-250VAC): Connect your main power supply to terminals 1 and 2.
• Output (16 AMP / 250VAC, 20 AMP @30 VDC): Terminals 3, 4, and 5 are for the controlled output. Terminal 3 is common, Terminal 4 is normally open (NO), and Terminal 5 is normally closed (NC). Connect your load to the appropriate terminals based on your application (e.g., between 3 and 4 for normally off, turning on when timed).

3.2. Initial Power-Up and Battery

Upon initial power-up, the timer's internal rechargeable battery (40mAh) will begin charging. This battery saves your programmed settings during power interruptions. Allow the unit to be powered for at least 30 minutes for the battery to gain sufficient charge before programming or disconnecting power.

Figure 3.2: Internal 40mAh Rechargeable Battery.

Figure 3.3: TM618 Operating Voltage (220V AC shown).

4. Umarnin Aiki

The TM618 timer allows for precise control with up to 16 ON/OFF programs per day or week. The buttons on the front panel are used for setting the time and programs.

Figure 4.1: Timer Module with Manual.

4.1. Saita Lokacin Yanzu

1. Danna maɓallin KYAUTA button and hold it.
2. Yayin rikewa KYAUTA, danna SATI don saita ranar mako na yanzu.
3. Yayin rikewa KYAUTA, danna SAA don saita lokaci na yanzu.
4. Yayin rikewa KYAUTA, danna MIN don saita minti na yanzu.
5. Saki da KYAUTA Maɓalli. Lokaci ya yi yanzu.

4.2. Shirye-shiryen ON/KASHE lokutan

The timer supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. Danna maɓallin PROG button once. The display will show "1 ON".
2. Latsa SATI to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. Latsa SAA don saita awa ON da ake so.
4. Latsa MIN don saita lokacin da ake so ON.
5. Latsa PROG again. The display will show "1 OFF".
6. Maimaita matakai 2-4 don saita rana (s), sa'a, da mintuna da ake so don wannan shirin.
7. Latsa PROG to advance to the next program ("2 ON") or to exit programming mode if no more programs are needed.
8. To clear a program, press TUNA yayin da viewing the specific ON or OFF program you wish to clear.

4.3. Kashe Manual

Danna maɓallin MANUAL button to cycle through different operating modes:

• AUTO ON: The timer is currently ON and will follow the programmed schedule.
• KASHE AIKI: The timer is currently OFF and will follow the programmed schedule.
• A: The timer is forced ON, overriding any programs.
• KASHE: The timer is forced OFF, overriding any programs.

4.4. Recall Function

The TUNA button (often marked 'R' or 'RESET') is used to clear specific program settings or to reset the timer. A small pinhole button (R) is typically used for a full reset, which clears all programs and resets the time.

5. Kulawa

5.1. Kula da baturi

The TM618 features a built-in rechargeable battery. To ensure its longevity and proper function, keep the timer connected to power for regular charging. If the timer is stored for extended periods without power, the battery may discharge, requiring a full charge upon reconnection.

5.2. Tsaftacewa

Clean the exterior of the timer module with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing or display. Ensure no liquids enter the device.

6. Shirya matsala

• Nuni babu komai: Check power connections. Ensure the unit has been powered for at least 30 minutes to charge the internal battery.
• Programs not executing: Verify that the current time is set correctly. Check that the timer is in "AUTO ON" or "AUTO OFF" mode, not forced ON/OFF. Review your programmed ON/OFF times for accuracy.
• Mai ƙidayar lokaci ba ya amsawa ga maɓallai: Perform a full reset using the small 'R' pinhole button. If issues persist, ensure proper power supply.

7. Ƙayyadaddun bayanai

7.1. Bangarori

Figure 7.1: Front Dimensions.

Figure 7.2: Side Dimensions.

8. Garanti da Tallafawa

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.