Unit UT-306C Infrared Thermometer User Manual

1. Gabatarwa

The Unit UT-306C Infrared Thermometer is a robust and easy-to-use device designed for non-contact surface temperature measurement. This series is suitable for various applications, including the food industry, machine maintenance, metal processing, cold storage, and other industrial fields.

It features a wide temperature range, selectable Celsius/Fahrenheit units, an EBTN display, auto power-off, and low battery indication.

2. Bayanin Tsaro

Da fatan za a karanta duk gargaɗin tsaro da umarnin a hankali kafin amfani da wannan samfurin. Rashin bin waɗannan umarni na iya haifar da girgizar lantarki, gobara, ko mummunan rauni.

2.1 Gabaɗaya Kariyar Tsaro

• Kar a nuna Laser kai tsaye a idanu ko saman filaye.
• Kada a yi amfani da na'urar a wurare masu fashewar gas, tururi, ko ƙura.
• Tsare na'urar daga filaye masu ƙarfi na lantarki.
• Kada kayi ƙoƙarin kwance ko gyara na'urar. Koma duk hidima ga ƙwararrun ma'aikata.
• Tabbatar an rufe sashin baturin amintacce kafin amfani.

2.2 Tsaron Laser

This device uses a Class 2 laser. Avoid direct eye exposure to the laser beam. The laser power is less than 1mW and the wavelength is 630nm-670nm.

3. Product Components and Display

Familiarize yourself with the main parts of your UT-306C Infrared Thermometer.

Hoto na 3.1: Gaba view of the Unit UT-306C Infrared Thermometer, showing the display, trigger, and function buttons.

Hoto na 3.2: Gede view of the Unit UT-306C, highlighting the ergonomic grip and laser aperture.

Hoto na 3.3: Close-up of the EBTN-LCD display on the UT-306C, showing temperature readings and mode indicators.

3.1 Masu Nuni

The EBTN-LCD display provides clear readings and indicators:

• HI/LO Alarm: Indicates if the measured temperature is above or below set limits.
• RIKE: Shows that the current reading is held on the display.
• °C/F: Alamar naúrar zafin jiki.
• MAX/MIN/AVG/DIF: Indicates the current measurement mode (Maximum, Minimum, Average, or Difference).
• Ƙananan Baturi: Alamar yana bayyana lokacin da ƙarfin baturi ya yi ƙasa.

4. Saita

4.1 Shigar da Baturi

1. Nemo sashin baturi akan ma'aunin ma'aunin zafi da sanyio.
2. Bude murfin baturin.
3. Insert two 1.5V AAA batteries, ensuring correct polarity (+/-).
4. Rufe murfin baturin amintacce.

4.2 Kunnawa / Kashewa

To power on the device, press the trigger. The device will automatically power off after a period of inactivity to conserve battery life.

5. Umarnin Aiki

5.1 Ma'auni na asali

1. Nuna ma'aunin zafi da sanyio a saman da aka nufa.
2. Press and hold the trigger. The laser pointer will activate (if enabled) to indicate the measurement area.
3. The temperature reading will appear on the display.
4. Release the trigger to hold the reading on the display (Data Hold function).

5.2 Unit Selection (°C/°F)

With the device powered on, press the 'SET' button to cycle through settings. Use the up/down arrows to change the temperature unit between Celsius (°C) and Fahrenheit (°F).

5.3 Daidaita asara

Emissivity (ε) is crucial for accurate temperature measurement. The UT-306C allows adjustment from 0.10 to 1.00.

1. Press the 'MODE' button to enter emissivity adjustment mode.
2. Use the up/down arrows to increase or decrease the emissivity value.
3. Press 'MODE' again to confirm and exit.

Refer to a standard emissivity table for common materials to ensure accuracy.

5.4 Measurement Modes (MAX/MIN/AVG/DIF)

Press the 'MODE' button repeatedly to cycle through different measurement modes:

• MAX: Yana nuna matsakaicin zafin da aka auna yayin daukar hoto.
• MIN: Yana nuna mafi ƙarancin zafin jiki da aka auna yayin bincike.
• AVG: Yana nuna matsakaicin zafin jiki da aka auna yayin bincike.
• DIF: Displays the difference between the maximum and minimum temperatures measured during a scan.

5.5 Ƙararrawa Mai Girma/Ƙarancin Zazzabi

The device can be set to alarm when temperatures exceed or fall below predefined limits.

1. Press 'SET' to enter alarm setting mode.
2. Use the up/down arrows to adjust the high or low alarm threshold.
3. Press 'SET' again to switch between high and low alarm settings.
4. Press 'MODE' to exit alarm setting mode.

6. Kulawa

6.1 Tsabtace Na'urar

Don tabbatar da ingantaccen karatu da tsawaita rayuwar ma'aunin zafin jiki:

• Clean the lens with a soft, clean cloth or cotton swab moistened with water or medical alcohol.
• Tsaftace na'urar casing da adamp zane da sabulu mai laushi. Kada a yi amfani da masu tsabtace abrasive ko kaushi.
• Tabbatar cewa na'urar ta bushe gaba ɗaya kafin ajiya ko amfani na gaba.

6.2 Sauya Baturi

When the low battery indicator appears on the display, replace the batteries as described in the "Battery Installation" section (4.1). Always use two new 1.5V AAA batteries.

6.3 Adana

Store the thermometer in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.

7. Shirya matsala

8. Ƙayyadaddun bayanai

9. Garanti da Tallafawa

For warranty information and technical support, please refer to the official Unit website ko tuntuɓi mai rarrabawa na gida. Ajiye rasidin siyan ku azaman shaidar siyan.