Sinotimer Digital Programmable Timer TM618N-2 User Manual

1. Samfurin Ya Ƙareview

The Sinotimer TM618N-2 is a versatile 7-day weekly digital programmable timer designed for automated control of electrical equipment. It allows users to set specific daily or weekly schedules for turning devices on and off, ensuring efficient energy management and convenience. This timer is suitable for a wide range of applications, including controlling lighting, heating, ventilation, and other electrical appliances.

Hoto 1: Gaba view of the Sinotimer TM618N-2 Digital Timer, showing the display and control buttons.

2. Mabuɗin Siffofin

• Za a iya shiryawa a kowane mako: Allows up to 16 ON/OFF programs per day or week.
• Multi-aiki: Includes Clock display, Timer, Countdown, Automatic weekly time deviation correction, and Sleep mode.
• Babban Ƙarfi: Taimakawa 16 Amp / 220 Volt AC loads.
• Faɗin Voltage Daidaituwa: Operates with 220V, 230V, 240V AC.
• Batir da aka Gina: Yana riƙe da saituna yayin wutar lantarkitages (Lithium battery type).
• Aikace-aikace iri-iri: Ideal for controlling dryers, defrosting equipment, swimming pool pumps, gates, lighting, and more.

3. Ƙayyadaddun bayanai

4. Shigarwa

Muhimmiyar Sanarwa na Tsaro: Installation should only be performed by a qualified electrician. Ensure power is disconnected before attempting any wiring.

1. hawa: The TM618N-2 is designed for DIN rail mounting or screw mounting. Secure the timer in a suitable electrical enclosure.
2. Waya: Refer to the wiring diagram on the back of the unit.
   

   Hoto na 2: Baya view of the Sinotimer TM618N-2, showing input/output terminals and wiring diagram.

   • Input (Terminals 1 & 2): Connect your 200-250VAC power supply to these terminals.
   • Output (Terminals 3, 4, & 5):
     • Terminal 3: Common (COM)
     • Terminal 4: Normally Open (NO) - Connect your load here for switched power.
     • Terminal 5: Normally Closed (NC) - (Less commonly used for timer applications, but available).
3. Kunna Wuta: Once wiring is complete and secure, restore power to the circuit. The timer display should illuminate.

Figure 3: Technical drawing showing the dimensions of the Sinotimer TM618N-2 timer.

5. Umarnin Aiki

5.1. Ayyukan Button

• ARGO: Used to set the current time and day.
• PROG: Enters/exits programming mode for ON/OFF schedules.
• SATI: Selects the day(s) of the week during time or program setting.
• SAA: Adjusts the hour during time or program setting.
• MIN: Adjusts the minute during time or program setting.
• TUNA: Recalls or cancels a program setting.
• MANUAL: Manually overrides the timer's current state (ON/AUTO/OFF).
• R (Reset): Small button (requires a pointed object) to reset the timer to factory defaults.

5.2. Setting Current Time and Day

1. Latsa ka riƙe KYAUTA maballin.
2. Yayin rikewa KYAUTA, danna SATI to set the current day (MO, TU, WE, TH, FR, SA, SU).
3. Yayin rikewa KYAUTA, danna SAA don saita lokaci na yanzu.
4. Yayin rikewa KYAUTA, danna MIN don saita minti na yanzu.
5. Saki da KYAUTA maballin don adana saitunan.

5.3. Programming ON/OFF Schedules

The timer supports up to 16 ON and 16 OFF programs. Each program can be set for a specific day or group of days.

1. Danna maɓallin PROG button once. The display will show "1 ON".
2. Latsa SATI repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; etc.).
3. Latsa SAA don saita awa ON da ake so.
4. Latsa MIN don saita lokacin da ake so ON.
5. Latsa PROG again. The display will show "1 OFF".
6. Repeat steps 2-4 to set the desired OFF time for the first program.
7. Latsa PROG to move to the next program ("2 ON", "2 OFF", etc.) and repeat the process for up to 16 programs.
8. To exit programming mode and save settings, press the KYAUTA maballin.

5.4. Kashe Manual

Danna maɓallin MANUAL button to cycle through the output modes:

• A: Output is continuously ON, ignoring programs.
• Auto: Output follows the programmed schedules.
• KASHE: Output is continuously OFF, ignoring programs.

Ensure the timer is in AUTO mode for programmed operation.

5.5. Resetting the Timer

To clear all settings and return the timer to its factory default state, insert a pointed object (like a paperclip) into the small R (Reset) hole and press gently.

6. Kulawa

The Sinotimer TM618N-2 requires minimal maintenance.

• Tsaftace na'urar kuma ba ta da ƙura. Yi amfani da laushi, bushe bushe don tsaftacewa.
• Kada a yi amfani da masu tsabtace abrasive ko sauran ƙarfi.
• Ensure the timer is installed in a dry environment, away from direct moisture or extreme temperatures.
• The internal battery is designed for long life and is not user-replaceable. If the display goes blank or settings are not retained after a power outage, the battery may need professional service.

7. Shirya matsala

8. Garanti da Tallafawa

Don samun bayanai game da garanti da tallafin fasaha, da fatan za a duba takardun da aka bayar tare da siyan ku ko kuma a tuntuɓi dillalin ku. Ajiye shaidar siyan ku don da'awar garanti.

Manufacturer: Sinotimer