Instruction Manual for Bravilor Bonamat HWA 14 Hot Water Dispenser

1. Gabatarwa

Thank you for choosing the Bravilor Bonamat HWA 14 Hot Water Dispenser. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before using the dispenser and keep it for future reference.

2. Umarnin Tsaro

To ensure safe operation and prevent damage to the appliance or injury to users, please observe the following safety precautions:

• Tsaron Wutar Lantarki: Always connect the dispenser to a grounded power outlet. Do not operate with a damaged power cord or plug. Keep the power cord away from hot surfaces.
• Hot Surfaces and Water: The dispenser produces hot water and surfaces may become hot during operation. Exercise extreme caution to avoid burns. Do not touch hot surfaces directly.
• Matakan Ruwa: Never operate the dispenser without sufficient water in the tank. This can cause damage to the heating element.
• Tsaftacewa: Disconnect the power supply before cleaning. Do not immerse the appliance in water or other liquids. Use only recommended cleaning agents.
• Yara da Kulawa: Wannan na'urar ba a yi niyya don amfani da mutane ba (ciki har da yara) tare da rage ƙarfin jiki, hankali ko tunani, ko rashin ƙwarewa da ilimi, sai dai idan an ba su kulawa ko umarni game da amfani da na'urar ta wurin mutumin da ke da alhakin amincin su. Ya kamata a kula da yara don tabbatar da cewa ba sa wasa da na'urar.
• Gyara: Do not attempt to repair the appliance yourself. All repairs should be performed by qualified service personnel.

3. Samfurin Ya Ƙareview

The Bravilor Bonamat HWA 14 is a robust and efficient hot water dispenser designed for various applications. Familiarize yourself with its main components:

3.1 Abubuwan

• Babban Rukunin Gidaje (Gidaje)
• Water Tank (internal, 13.1 L capacity)
• Rarraba Taɓa
• Tray Drip
• Power Switch / Indicator Lights
• Igiyar Wutar Lantarki

3.2 Samfura Views

Hoto na 1: Gaba view of the Bravilor Bonamat HWA 14, showing the main body, dispensing tap, and drip tray.

Hoto na 2: Angled view of the dispenser, highlighting its compact design and side panel.

Hoto na 3: Gede view of the dispenser, illustrating its depth and overall dimensions.

4. Saita

4.1 Buɗewa

1. A hankali a cire na'urar rarrabawa daga cikin marufinta.
2. Cire duk kayan tattarawa, gami da kowane fim ɗin kariya ko kaset.
3. Inspect the appliance for any signs of damage. If damaged, do not use and contact your supplier.

4.2 Wuri

• Place the dispenser on a stable, level, and heat-resistant surface.
• Ensure adequate ventilation around the unit. Do not place it directly against a wall or in an enclosed cabinet.
• Keep the dispenser away from direct sunlight, heat sources, and areas with high humidity.
• Ensure the power outlet is easily accessible.

4.3 Farkon Tsaftacewa

1. Before first use, clean the water tank and dispensing tap.
2. Fill the tank with clean water and dispense a few liters to flush the system. Discard this water.
3. Shafa waje da tallaamp zane.

5. Umarnin Aiki

5.1 Cika Tankin Ruwa

1. Ensure the dispenser is unplugged or powered off.
2. Bude murfin tankin ruwa.
3. Fill the tank with fresh, cold drinking water up to the maximum fill line. Do not overfill.
4. Rufe murfin amintacce.

5.2 Kunnawa

1. Toshe igiyar wutar lantarki cikin mashin wutar lantarki.
2. Turn on the main power switch, usually located on the back or side of the unit.
3. The indicator light will illuminate, signaling that the heating process has begun. The water will heat to the optimal temperature. This may take several minutes depending on the initial water temperature and tank capacity.

5.3 Rarraba Ruwan Zafi

1. Once the water has reached the desired temperature (indicated by a change in the indicator light or a ready signal), place a cup or container under the dispensing tap.
2. Press or pull the dispensing lever/button to release hot water.
3. Release the lever/button to stop the flow.
4. Tsanaki: Hot steam may be released during dispensing.

5.4 Kashe Wuta

• When not in use for extended periods, turn off the main power switch.
• Cire na'urar rarraba wutar lantarki daga wurin fitar da wutar lantarki.

6. Kulawa

Regular maintenance ensures the longevity and optimal performance of your hot water dispenser.

6.1 Tsabtace Kullum

• A kwashe da tsaftace tiren ɗigo akai-akai.
• Shafa saman waje da taushi, damp zane. Kada a yi amfani da masu tsabtace abrasive ko sauran ƙarfi.
• Clean the dispensing tap with a soft brush or cloth to remove any residue.

6.2 Zubewar ciki

Depending on water hardness, limescale can build up inside the tank and heating elements. Descale the unit regularly (e.g., every 1-3 months) using a suitable descaling agent for hot water appliances. Follow the descaling agent's instructions carefully.

1. Ensure the dispenser is unplugged and cooled down.
2. Prepare the descaling solution according to the product instructions.
3. Zuba maganin a cikin tankin ruwa.
4. Allow it to sit for the recommended time.
5. Drain the solution completely.
6. Rinse the tank thoroughly by filling and draining with fresh water several times to remove all descaling residue.

6.3 Adana

If storing the dispenser for an extended period, ensure it is clean, dry, and empty of water. Store it in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Shirya matsala

Duba teburin da ke ƙasa don ganin matsalolin da aka saba fuskanta da kuma hanyoyin magance su. Idan matsalar ta ci gaba, tuntuɓi tallafin abokin ciniki.

8. Ƙayyadaddun bayanai

9. Garanti da Tallafawa

For warranty information and customer support, please refer to the documentation provided with your purchase or contact your local Bravilor Bonamat distributor. Keep your proof of purchase for any warranty claims.

For further assistance, visit the official Bravilor Bonamat website ko tuntuɓi sashen sabis na abokin ciniki.