1. Gabatarwa
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the AKO AKO-15692 Three-Phase PROPlus Basic Electronic Control Panel with Defrost 10200W. Please read this manual thoroughly before installation and operation.
Hoto na 1: Gaba view of the AKO AKO-15692 control panel. This image displays the front of the AKO AKO-15692 control panel. On the left, a digital display shows '-19.4' with 'ECO' and defrost indicators. Below the display are navigation buttons (up, down, set, escape, power, question mark, light). The right side features a transparent hinged cover, revealing internal circuit breakers and a rotary switch.
2. Bayanin Tsaro
Always observe the following safety precautions to prevent injury and damage to the device:
- Dole ne ma'aikata masu ƙwarewa kawai su yi shigarwa da gyara.
- Disconnect power before performing any work on the control panel.
- Tabbatar da ƙasa mai kyau don hana girgiza wutar lantarki.
- Do not expose the unit to moisture or extreme temperatures outside its operating range.
- Verify all connections are secure and correct before applying power.
3. Samfurin Ya Ƙareview
The AKO-15692 is a three-phase electronic control panel designed for refrigeration systems requiring defrost management. It integrates control, protection, and monitoring functions for optimal performance and energy efficiency.
Mabuɗin fasali:
- Three-phase power compatibility (up to 10200W).
- Integrated defrost control.
- Digital display for temperature and status.
- User-friendly control interface.
- Robust enclosure for industrial environments.
4. Saita da Shigarwa
4.1 Buɗewa
Carefully unpack the control panel and inspect it for any signs of damage. Retain the packaging materials for future transport or storage.
4.2 Haɗawa
The unit is designed for screw-mounted installation. Choose a dry, well-ventilated location away from direct heat sources or excessive vibration. Ensure sufficient space for wiring and ventilation.
- Mark the mounting points on the wall using the panel's dimensions.
- A haƙa ramuka masu dacewa sannan a saka matosai na bango idan ya cancanta.
- Secure the control panel to the wall using suitable screws.
4.3 Haɗin Wutar Lantarki
All electrical connections must comply with local and national electrical codes. Refer to the wiring diagram provided inside the panel cover for specific connections.
- Tushen wutan lantarki: Connect the three-phase power supply to the designated terminals.
- Kwamfuta: Connect the compressor load to the appropriate output terminals.
- Defrost Heaters: Connect defrost heaters to their dedicated output terminals.
- Sensors: Connect temperature sensors to the specified input terminals.
- Kasa: Ensure all grounding connections are properly made.
Warning: Incorrect wiring can lead to severe damage or electrical shock. Consult a qualified electrician if unsure.
5. Umarnin Aiki
5.1 Kunnawa / Kashewa
Danna maɓallin ⏻ (Power) button to turn the unit on or off. The digital display will illuminate upon power-on.
5.2 Nuni da Kewayawa
The digital display shows the current temperature or system status. Use the following buttons for navigation and settings:
- SAITA: Enter/confirm settings.
- ▲ (Up): Increase values or navigate up.
- ▼ (Down): Decrease values or navigate down.
- ESC: Exit menu or cancel operation.
- ?: Access help or information.
- ☀︎ (Light): Control internal light (if applicable) or display brightness.
5.3 Saita Zazzabi
- Danna maɓallin SET button. The current setpoint will flash.
- Yi amfani da ▲ or ▼ maɓalli don daidaita zafin da ake so.
- Latsa SET again to confirm the new setpoint.
5.4 Zagayowar Defrost
The unit features automatic defrost control. Parameters such as defrost interval and duration can be configured through the settings menu. Consult the detailed programming section in the full manual for advanced configurations.
6. Kulawa
Regular maintenance ensures optimal performance and longevity of the control panel.
6.1 Tsaftacewa
- Cire haɗin wuta kafin tsaftacewa.
- Shafa waje da taushi, damp zane. Kada a yi amfani da masu tsabtace abrasive ko sauran ƙarfi.
- Ensure no moisture enters the internal components.
6.2 Dubawa
Bincika waɗannan abubuwan lokaci-lokaci:
- Waya: Bincika sako-sako da wayoyi masu lalacewa.
- Terminals: Ensure all terminal connections are tight.
- Yake: Look for any signs of physical damage or corrosion.
- Samun iska: Tabbatar cewa hanyoyin samun iska a bayyane suke kuma ba tare da wani cikas ba.
7. Shirya matsala
Wannan sashe yana magance matsalolin da aka saba fuskanta. Don ƙarin matsaloli masu rikitarwa, tuntuɓi tallafin fasaha.
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Panel does not power on. | No power supply; Blown fuse/tripped breaker. | Check main power supply; Inspect fuses/breakers and reset if necessary. |
| Karatun zafin jiki mara daidai. | Faulty sensor; Sensor incorrectly placed. | Check sensor connections; Verify sensor placement; Replace sensor if faulty. |
| Defrost not initiating. | Incorrect defrost settings; Defrost heater fault. | Review defrost parameters in settings; Check defrost heater and wiring. |
8. Ƙayyadaddun bayanai
| Siffar | Daki-daki |
|---|---|
| Samfura | AKO-15692 |
| Alamar | AKO |
| Ƙimar Ƙarfi | 10200W |
| Mataki | Mataki na uku |
| Nau'in Shigarwa | Dunƙule-saka |
| Aikin Sanyin Dama | Haɗe-haɗe |
9. Garanti da Tallafawa
9.1 Bayanin Garanti
AKO products are covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official AKO webshafin don cikakkun sharuɗɗa da sharuɗɗa.
9.2 Tallafin Fasaha
For technical assistance, spare parts, or service inquiries, please contact AKO customer support. Have your model number (AKO-15692) and purchase date ready when contacting support.
Contact information (e.g., phone, email, website) can typically be found on the product packaging or the official AKO website.
