Orient Japanese Automatic 40mm Diver Style Watch Instruction Manual

Gabatarwa

This manual provides essential instructions for the proper use and care of your new Orient Japanese Automatic 40mm Diver Style Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

Gaba view of the Orient Japanese Automatic 40mm Diver Style Watch, showcasing the blue dial and stainless steel bracelet.

Saita

1. Naɗaɗɗen Farko

Your Orient watch is powered by an F6722 automatic movement, which is also hand-windable. To start the watch or if it has stopped, gently wind the crown clockwise approximately 30-40 times. This builds up the initial power reserve.

2. Saita Lokaci da Kwanan Wata

1. Buɗe Kambin: Kambin yana da nau'in da ba ya jure ruwa. Juya kambin a akasin agogo har sai ya fito zuwa matsayi na 1.
2. Saita Kwanan Wata: Pull the crown out to position 2. Rotate the crown clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
3. Saita Lokaci: Pull the crown out to position 3. The second hand will stop (hacking feature). Rotate the crown to set the hour and minute hands. To ensure accurate time, set the time a few minutes ahead, then push the crown back to position 1 when a time signal (e.g., from a radio or phone) reaches the desired time.
4. Tabbatar da Crown: Push the crown back to position 1 and screw it down clockwise firmly against the case to maintain water resistance.

Na baya view of the watch, showing the screw-down case back and the stainless steel bracelet clasp.

Aiki Agogon ku

Motsi ta atomatik

The F6722 movement is an automatic, self-winding caliber. It winds itself through the motion of your wrist. Regular wear will keep the watch powered. If the watch is not worn for an extended period, it will stop and require manual winding as described in the "Initial Winding" section.

Juyawa Juyawa Unidirectional

The watch features a unidirectional rotating bezel. This bezel can be used to measure elapsed time, typically for diving or other timed activities. To use it, align the triangle marker on the bezel with the minute hand at the start of your activity. The minute hand will then indicate the elapsed time against the bezel's markings.

Resistance Ruwa

This watch is water resistant to 200 meters (660 feet). This rating makes it suitable for professional marine activity and serious surface water sports. It is not suitable for scuba diving. Koyaushe a tabbatar an rufe kambin gaba ɗaya kafin a fallasa agogon ga ruwa.

Kulawa da Kulawa

• Tsaftacewa: Wipe the watch regularly with a soft, dry cloth to remove dust and smudges. For stainless steel parts, a slightly damp za a iya amfani da zane, sannan a bushe nan da nan.
• Lu'ulu'u mai launin shuɗi: The watch is equipped with a scratch-resistant sapphire crystal. While highly durable, it is not entirely impervious to damage. Avoid extreme impacts.
• Matsananciyar Zazzabi: Ka guji fallasa agogonka ga yanayin zafi mai tsanani ko canjin yanayin zafi kwatsam, domin hakan na iya shafar motsi da rufewa.
• Sinadaran: Keep the watch away from chemicals, solvents, and detergents, which can damage the case, seals, and strap materials.
• Filayen Magnetic: Strong magnetic fields can affect the accuracy of mechanical watches. Keep your watch away from strong magnets (e.g., speakers, refrigerators, certain electronic devices).
• Sabis: For optimal performance, it is recommended to have your automatic watch serviced by a qualified watchmaker every 3-5 years.

Shirya matsala

• Agogon Ba Ya Aiki: If the watch has stopped, ensure it is sufficiently wound. Manually wind the crown 30-40 times. If it still does not start, gently shake the watch side-to-side to engage the rotor.
• Lokacin da Ba daidai ba ne: Minor variations in accuracy are normal for mechanical watches. If the watch is consistently gaining or losing significant time, it may require adjustment by a professional watchmaker. Exposure to strong magnetic fields can also cause inaccuracy.
• Ranar da Ba ta Canzawa ba: Ensure the crown is fully pulled out to position 2 when setting the date. If the date is stuck, try advancing the time past midnight to see if it changes. If not, consult a watchmaker.
• Agogon Ruwa na Ciki: If you notice condensation or water inside the watch, immediately take it to a qualified watchmaker for inspection and repair to prevent further damage.

Ƙayyadaddun bayanai

Garanti da Taimako

For information regarding warranty coverage, service centers, or additional support, please refer to the official Orient webshafin yanar gizo ko tuntuɓi dillalin da aka ba ku izini. Ajiye shaidar siyan ku don buƙatun garanti.

Ƙarin Albarkatu

Below are some videos that may provide further insight into the watch's features and operation: