Sena 10S Motorcycle Bluetooth Headset Communication System User Manual

1. Samfurin Ya Ƙareview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Mabuɗin fasali:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Hoto 1.1: Gaba view of the Sena 10S Motorcycle Bluetooth Headset.

2. Abubuwan Kunshin

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Saitin Majalisa
• Boom Makirufo
• Microphone mai waya
• Dutsen Clamp Kit
• USB Power & Data Cable
• Audio Cable
• Velcro Pads don Masu Magana
• Sponges Microphone

Figure 2.1: All components included in the Sena 10S package.

3. Saita da Shigarwa

3.1 Cajin Na'urar

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Hoto 3.1: Gefe view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Sake sukurori a bayan clamp naúrar.
2. Zamar da clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Umarnin Aiki

4.1 Kunnawa / Kashewa

• Kunna Wuta: Press and hold the Phone Button and the Jog Dial for 1 second.
• Kashe Wuta: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Sarrafa ƙara

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume.

4.3 Bluetooth Pairing (Smartphone)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Intercom Communication

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Kunna/Dakata Kiɗa: Latsa ka riƙe Jog Dial na daƙiƙa 1.
• Amsa/Ƙarshen Kira: Matsa Maballin Waya.
• Kiran murya: Latsa ka riƙe maɓallin waya na tsawon daƙiƙa 3.

5. Kulawa da Kulawa

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Keep the device dry. Moisture can damage internal circuits.
• Kada a yi amfani da sinadarai masu tsauri, masu kaushi mai tsafta, ko mai ƙarfi don tsaftace na'urar.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Ajiye na'urar a wuri mai sanyi, bushe lokacin da ba a amfani da ita.
• Charge the battery regularly, even if not in use, to maintain battery health.

6. Shirya matsala

If you encounter issues with your Sena 10S, try the following steps:

• Babu Ƙarfi: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Babu Sauti/Ƙarancin Girma: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Intercom Not Connecting: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Kashe haɗin Bluetooth: Ensure your paired device is within range. Try re-pairing the device.
• Sake saita Na'urar: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Bayanan fasaha

8. Bidiyon Samfur na hukuma

9. Garanti da Tallafawa

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.