TechCare Massager Plus 24 Electronic Pulse Massager User Manual
Model: Plus 24
Gabatarwa
The TechCare Massager Plus 24 is a rechargeable electronic pulse massager designed for temporary relief of pain associated with sore and aching muscles. It is suitable for use on the shoulder, waist, back, upper extremities, and lower extremities, often due to strain from exercise or normal household work activities.
Image: The TechCare Massager Plus 24 device, shown with various electrode pads and accessories.
Mabuɗin Siffofin
- Yanayin Tausa guda 24: Includes stimulation options such as Tapping, Acupuncture, Deep Tissue, Foot, Cupping, and Combo.
- Daidaita lokaci: Set treatment duration from 10 to 60 minutes using the "T" button.
- Baturi Mai Caji: Features an internal lithium battery providing up to 20 hours of continuous use.
- Dual Output (A-B): Allows for simultaneous use by two separate users or on two different body areas.
- Babban allo LCD: Provides an easy-to-read interface, enhancing usability for all users.
Image: Visual representation of the 24 available massage modes.
Jagorar Saita
- Cajin Na'urar: Before first use, fully charge the internal lithium battery using the provided USB cable and AC wall plug.
- Attach Electrode Pads: Snap the electrode pads onto the pad cables. Ensure the device is turned OFF before connecting the cables.
- Apply Pads to Skin: Place the electrode pads firmly on clean, dry skin in the desired treatment area. Refer to the included pad placement guide for optimal positioning.
- Kunna Na'ura: Locate the ON/OFF switch on the side of the device and slide it to the 'ON' position.
- Zaɓi Yanayin: Use the 'M' button to cycle through the 24 available massage modes.
- Daidaita Ƙarfi: Use the '+' and '-' buttons to increase or decrease the intensity level until a comfortable sensation is achieved.
- Saita Mai ƙidayar lokaci: Press the 'T' button to adjust the treatment duration (10-60 minutes).
Image: Step-by-step visual guide for setting up and using the TechCare Massager Plus 24.
Umarnin Aiki
Kunna/Kashe Wuta
To turn the device on, slide the power switch located on the side of the unit to the 'ON' position. The LCD screen will illuminate. To turn off, slide the switch back to the 'OFF' position.
Zaɓin Yanayin
Press the 'M' button to cycle through the 24 pre-programmed massage modes. Each press will advance to the next mode. The selected mode will be displayed on the LCD screen.
Daidaita Ƙarfi
Use the '+' button to increase the intensity of the pulse and the '-' button to decrease it. Adjust the intensity gradually until you feel a comfortable, stimulating sensation. Avoid setting the intensity too high, which may cause discomfort.
Saitin Mai ƙidayar lokaci
The device has an adjustable timer. Press the 'T' button to select the desired treatment duration, ranging from 10 to 60 minutes. The remaining time will be displayed on the screen.
Dual Channel Operation (A-B Output)
The A-B output feature allows for two sets of electrode pads to be used simultaneously, either on different body parts or by two individuals. Each channel (A and B) can have its intensity adjusted independently.
Image: The device's display showing various massage modes and intensity levels.
Kulawa
- Tsaftace Na'urar: Goge na'urar da taushi, damp zane. Kada a yi amfani da masu tsabtace ƙura ko nutsar da na'urar a cikin ruwa.
- Electrode Pad Care: After each use, place the electrode pads back onto their protective film to maintain their adhesive quality. Store them in a cool, dry place. Replace pads when they lose their stickiness.
- Cajin: Yi cajin na'urar lokacin da alamar baturi ya nuna ƙaramin ƙarfi. A guji yin cajin da yawa na tsawon lokaci.
Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| No sensation or weak pulse | Pads not properly attached; low battery; intensity too low; faulty cable. | Ensure pads are firmly on skin; recharge device; increase intensity; check cable connections or replace if damaged. |
| Na'urar baya kunna | Battery is completely drained; power switch is off. | Charge the device for at least 30 minutes; ensure power switch is in the 'ON' position. |
| Pads losing stickiness | Pads sun yi datti ko sun lalace. | Clean skin before application; gently wipe pads with a damp cloth (do not soak); replace pads if stickiness is not restored. |
Ƙayyadaddun bayanai
- Samfura: Farashin 24
- Tushen wutar lantarki: 1 baturin lithium ion (an haɗa)
- Girma: 5.67 x 3.54 x 3.11 inci
- Nauyi: 1.04 fam
- Mai ƙira: TechCare Massager
- ASIN: B0CGCFW8QB
Garanti & Taimako
The TechCare Massager Plus 24 comes with a limited lifetime warranty. To activate your warranty, please visit www.techcaremassager.com/pluswarranty.
For any questions or concerns, you may contact TechCare Massager directly:
- Imel: wecare@techcaremassager.com
- Lambar Kyauta: (888) 489-6116
Bayani game da kayan abinci na abinci FDA ba ta kimanta su ba kuma ba a yi niyya don ganowa, magani, warkewa, ko hana kowace cuta ko yanayin lafiya ba.
