1. Gabatarwa
The Muzata U116 LED Channel is engineered to deliver a spotless neon lighting effect when used with compatible LED strips. This black aluminum channel, featuring a milky white cover, provides an elegant and high-end lighting appearance. Its innovative hanging design offers versatile installation options, expanding creative lighting possibilities for various indoor spaces.
For optimal 'spotless' effect, it is recommended to use LED strips with a density of at least 96 LEDs per meter, such as Muzata AC1L, AC1T, or SH3L LED strips. The channel is 17mm wide, accommodating LED strips up to 17mm, including waterproof variants.
Figure 1: Muzata U116 LED Channel components and an example of hanging LED lighting.
2. Abubuwan Kunshin
Tabbatar cewa duk abubuwan da aka gyara suna nan a cikin kunshin ku:
- 5 x LED Channel (3.3FT/1M each)
- 5 x LED Cover (Milky White)
- 10 x Hanging Wire Rope
- 5 x End Cap
- 5 x End Cap with Hole
- 10 x Shirye-shiryen hawa
- 10 x Skru
Figure 2: All included components for the Muzata U116 LED Channel system.
3. Ƙayyadaddun bayanai
| Siffar | Daki-daki |
|---|---|
| Lambar Samfura | U116 |
| Launi | Black Channel, Milky White Cover |
| Kayan abu | Aluminum |
| Tsawon Tashar | 3.3 FT (1 Meter) per piece |
| Nisa Cikin gida | 17mm (fits LED strips within 17mm) |
| Amfani | Cikin gida |
| Siffa ta Musamman | Spotless Effect, Heat Dissipation, Dust/Moisture Protection |
| Nauyin Abu | Fam 3.09 (don fakiti 5) |
4. Saita & Shigarwa
Follow these steps to install your Muzata U116 LED Channel system:
- Prepare the LED Strip: Ensure your LED strip is clean and ready for installation. For a spotless effect, use LED strips with at least 96 LEDs/meter.
- Insert LED Strip: Carefully stick the LED light strip into the aluminum channel.
- Haɗa Murfin: Press the milky white cover firmly into the channel until it snaps securely into place.
- Install End Caps: Attach the appropriate end caps to both ends of the channel. Use the end cap with a hole for the hanging wire side.
- Prepare Hanging Wire: Pass the fixed end of the hanging wire rope through the designated hole in the end cap.
- Secure Wire to Channel: Slide the wire's attachment mechanism into the channel's groove and tighten it to secure the channel.
- Daidaita Tsayin Rataye: If necessary, use a cable cutter (CR12 recommended) to trim the hanging wire rope to your desired length.
- Haɗawa zuwa Rufi: Insert the screws into the sleeve of the ceiling mount and securely fasten it to the ceiling.
- Connect Wire to Ceiling Mount: Insert the free end of the wire rope into the fixing parts of the ceiling mount. To adjust the wire rope length, simultaneously press the end and the protruding part of the fixing mechanism to disengage the cable.
Figure 3: Visual guide for hanging installation.
Jagorar Bidiyo na shigarwa
Video 1: Official Muzata installation guide for the hanging LED channel, demonstrating the steps for creating ambient lighting.
5. Umarnin Aiki
Once installed, connect your LED strip to a compatible power source and controller (not included with the channel system). The channel itself is a passive component designed to house and diffuse light from your LED strips.
For the best 'spotless' effect, ensure your chosen LED strips have a high density of LEDs, ideally 96 LEDs per meter or more. Lower density strips may still show individual LED dots through the milky white cover.
Figure 4: Achieving a truly spotless neon effect with appropriate LED strip density.
6. Kulawa
To ensure longevity and optimal performance of your LED channel and strips:
- Tsaftacewa: Gently wipe the aluminum channel and milky white cover with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp cloth can be used, ensuring no moisture enters the channel where the LED strip is housed.
- Kariya: The aluminum channel is anodized, providing excellent heat dissipation to prolong the lifespan of your LED strips. The thicker LED cover also protects your LED strip from dust, hair, and moisture, which can cause discoloration or damage over time.
- Dubawa: Periodically check the hanging wires and mounting points for any signs of wear or loosening to ensure secure installation.
7. Shirya matsala
- LEDs ba sa haskakawa: Ensure the LED strip is correctly connected to its power supply and controller. Check all electrical connections.
- Uneven light or visible spots: This typically indicates that the LED strip used has a low LED density. For a spotless effect, use strips with 96 LEDs/meter or higher.
- Channel not securely hanging: Re-check the tightening mechanism of the hanging wire within the channel and the ceiling mount. Ensure screws are firmly in place.
- Cover not fitting: Ensure the LED strip is properly seated within the channel and not obstructing the cover's grooves. Apply even pressure when pressing the cover into place.
8. Garanti & Tallafi
Muzata products are designed for quality and durability. For specific warranty information, please refer to the product packaging or contact Muzata customer service directly.
If you encounter any issues or have questions regarding your Muzata U116 LED Channel, please contact Muzata customer support. You can typically reach us by clicking on the 'Sold by Muzata' link on the product page and using the messaging or phone contact options provided.
