CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller User Manual

Gabatarwa

This manual provides detailed instructions for the installation, operation, and maintenance of your CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller. Please read this manual thoroughly before use to ensure proper functionality and safety.

Bayanin Tsaro

• Tabbatar da wutar lantarki voltage (DC12V-24V) matches the controller's requirements to prevent damage.
• Do not expose the controller to moisture or extreme temperatures.
• Disconnect power before making any connections or performing maintenance.
• An tsara wannan na'urar don amfanin cikin gida kawai.
• A kiyaye nesa da yara.

Abubuwan Kunshin

Kunshin ya kamata ya ƙunshi abubuwa masu zuwa:

• 1 x CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller (Model: Tuya-mini-WIFI)

Note: LED light strips and power supply are sold separately.

Samfurin Ƙarsheview

The CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller allows you to control your RGB LED light strips wirelessly via the Tuya Smart Life APP.

Hoto na 1: Gaba view of the CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller, showing the main control unit, the DC input cable, and the 4-pin output connector for RGB LED strips. A separate 4-pin male header is also visible, likely for connecting to the LED strip.

Hoto na 2: Na baya view of the CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller, illustrating the DC power input jack and the DC power output plug, along with the main control unit.

Mabuɗin fasali:

• WiFi 2.4GHz connectivity for smart control.
• Compatible with Tuya Smart Life APP.
• Supports DC12V-24V input voltage.
• Designed for RGB LED light strips.
• Compact mini design.

Ƙayyadaddun bayanai

Saita

1. Haɗin Waya

1. Connect LED Strip: Connect your RGB LED light strip to the 4-pin output connector of the controller. Ensure the polarity (R, G, B, V+) matches correctly.
2. Haɗa Kayan Wuta: Connect a compatible DC12V-24V power supply (not included) to the DC input jack of the controller.
3. Kunna Wuta: Plug the power supply into a wall outlet. The LED strip should briefly light up, indicating power.

Muhimmi: Always ensure the power supply is disconnected before making or changing any wiring connections.

2. Shigar App

1. Zazzage App: Bincika "Tuya Smart" or "Smart Life" in your mobile device's app store (App Store for iOS, Google Play Store for Android) and download the application.
2. Yi rijista/Shigo: Bude app ɗin kuma yi rajista don sabon asusu ko shiga tare da wanda yake.

3. Haɗin Na'ura

1. Shigar da Yanayin Haɗawa: With the controller powered on, press and hold the button on the controller for approximately 5-10 seconds until the LED strip starts flashing rapidly. This indicates the controller is in pairing mode.
2. Ƙara Na'ura a cikin App: Open the Tuya Smart/Smart Life app. Tap the "+" icon in the top right corner to add a device.
3. Zaɓi Nau'in Na'ura: Choose "Lighting" or "Light Source (Wi-Fi)" from the device list.
4. Haɗa zuwa Wi-Fi: Confirm that the LED strip is flashing rapidly. Enter your 2.4GHz Wi-Fi network name and password. (Note: 5GHz Wi-Fi networks are not supported.)
5. Haɗin kai: The app will begin searching for the device. Once found, the LED strip will stop flashing and remain steadily lit.
6. Sake suna na'ura: After successful pairing, you can rename the controller for easier identification (e.g., "Living Room LED Strip").

Umarnin Aiki

1. Using the Tuya Smart / Smart Life App

Once the controller is paired with the app, you can access various control functions:

• Zaɓin Launi: Choose from a wide spectrum of colors using the color wheel or predefined color palettes.
• Daidaita Haske: Adjust the intensity of the light from 0% to 100%.
• Yanayin Yanayin: Select from various dynamic scene modes (e.g., Party, Reading, Relax) or create custom scenes.
• Timer/Schedule: Set schedules for the LED strip to turn on/off or change modes at specific times.
• Sarrafa Rukuni: If you have multiple Tuya-compatible devices, you can group them for simultaneous control.
• Ikon murya: Integrate with voice assistants like Amazon Alexa or Google Assistant for hands-free control (requires additional setup within the app).

2. Manual Control (Button on Controller)

The physical button on the controller provides basic control:

• Danna Guda: Toggles the LED strip On/Off.
• Long Press (5-10 seconds): Enters pairing mode (LED strip flashes rapidly).

Kulawa

• Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning.
• Kada ku yi amfani da sunadarai masu tsauri ko masu tsabtace abrasive.
• Ensure proper ventilation around the controller to prevent overheating.

Shirya matsala

Garanti da Taimako

For warranty information or technical support, please refer to the retailer or manufacturer's official website where the product was purchased. Please have your purchase receipt and product model number (Tuya-mini-WIFI) available when contacting support.