Littafin Jagorar Mai Amfani da Wurin Wanka na INTEX Prism lita 8,592

Gabatarwa

This manual provides essential instructions for the safe assembly, operation, and maintenance of your INTEX Prism 8,592 Liters Structural Pool. Please read all instructions carefully before setup and use to ensure proper function and safety. Retain this manual for future reference.

Image: The INTEX Prism Structural Pool, showcasing its complete setup including the pool, filter pump, and safety ladder, with individuals enjoying the pool.

Bayanin Tsaro

GARGADI: Rashin bin waɗannan umarnin na iya haifar da mummunan rauni ko mutuwa.

• Ana Bukatar Kulawar Manya: Always provide active adult supervision to children and individuals with disabilities in and around the pool.
• Babu Ruwa: This pool is not designed for diving. Shallow water can cause serious injury.
• Share Yanki: Keep children away from the pool cover to avoid entanglement. Ensure the area around the pool is clear of obstacles.
• Amfanin sinadarai: Handle pool chemicals according to manufacturer instructions. Improper use can cause skin and eye irritation.
• Tsaron Wutar Lantarki: Connect the filter pump to a grounded 110v outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not use extension cords.
• Tsaron Tsani: Use the ladder only for entering and exiting the pool. Do not allow children to play on the ladder.

Abubuwan Kunshin

Tabbatar cewa duk abubuwan da aka gyara suna nan kafin fara taro:

• 1 x INTEX Prism Structural Pool Liner (8,592 Liters capacity)
• 1 x INTEX Filter Pump (2,006 Liters/hour, 110v)
• 1 x INTEX Safety Ladder
• Complete Metal Frame Components (legs, horizontal beams, pins)
• Hoses and Clamps for Filter Pump Connection
• Ground Cloth (may be included or recommended separately)

Saita Umarnin

1. Zaɓin Yanar Gizo: Choose a firm, level surface for pool installation. The area must be free of sharp objects, debris, and have adequate drainage. Ensure the ground can support the weight of the filled pool.
2. Sanya Tufafin Ƙasa: Lay the ground cloth (if included) on the selected site. This protects the pool liner from punctures.
3. Tsarin Tsari: Following the diagrams provided in the separate assembly guide, connect all metal frame components. Ensure all T-joints, horizontal beams, and vertical legs are securely interlocked with the spring-loaded pins.
4. Shigar da Liner: Carefully spread the pool liner within the assembled frame. Position the drain plug away from the main traffic area. Smooth out any major wrinkles in the bottom of the liner.
5. Haɗin famfo: Connect the filter pump to the designated inlet and outlet ports on the pool liner using the provided hoses and clamps. Tabbatar cewa duk hanyoyin haɗin gwiwa sun matse don hana yaɗuwa.
6. Majalisar Tsani: Assemble the safety ladder according to its specific instructions. Place the ladder securely against the pool.
7. Cika Pool: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the liner from the center outwards. Stop filling when the water reaches the recommended level, typically just below the top frame rail.

Image: The INTEX Prism Structural Pool fully assembled and filled with water in a garden setting, with individuals enjoying the pool.

Image: The INTEX Prism Structural Pool fully assembled and filled with water, situated in a garden environment.

Umarnin Aiki

1. Aiki na farko na famfo: Ensure the filter pump is properly connected to the pool and a grounded 110v GFCI outlet. Open all valves to allow water flow. Turn on the pump. It may take a few moments for water to circulate and air to purge from the system.
2. Aiki na yau da kullun: Run the filter pump for 2-4 hours daily to maintain water circulation and filtration. The exact duration may vary based on pool usage, water clarity, and environmental conditions.

Kulawa

• Kimiyyar Ruwa: Regularly test your pool water's pH and chlorine levels using a pool test kit. Maintain pH between 7.2 and 7.6, and chlorine levels between 1-3 ppm. Adjust as needed with appropriate pool chemicals.
• Tsaftacewa: Skim debris (leaves, insects) from the water surface daily. Vacuum the pool floor as necessary to remove settled dirt and particles.
• Tace harsashi: Turn off and unplug the filter pump before cleaning or replacing the filter cartridge. Clean or replace the filter cartridge every 2 weeks, or more frequently with heavy pool use or if water appears cloudy.
• Lokacin hunturu: For regions with freezing temperatures, consult local guidelines for proper pool winterization procedures to prevent damage to the pool and equipment.

Shirya matsala

Ƙayyadaddun bayanai

Garanti da Taimako

For detailed warranty information, product registration, or customer support, please refer to the documentation included with your INTEX Prism Structural Pool. It is recommended to keep your original purchase receipt as proof of purchase for any warranty claims. You may also visit the official INTEX website for further assistance and contact information.