FLARING Plasma Cutter Instruction Manual

1. Bayanin Tsaro

Always prioritize safety when operating the FLARING Plasma Cutter. Failure to follow safety guidelines can result in serious injury or property damage.

• Kayan Kariyar Keɓaɓɓen (PPE): Always wear appropriate PPE, including a welding helmet with a suitable shade, flame-resistant clothing, heavy-duty gloves, and safety shoes.
• Samun iska: Ensure adequate ventilation in the work area to disperse fumes and gases produced during cutting. Avoid working in confined spaces.
• Hadarin Wuta: Keep flammable materials away from the cutting area. Have a fire extinguisher readily available. Sparks and molten metal can travel significant distances.
• Tsaron Wutar Lantarki: Connect the machine to a properly grounded power supply. Do not operate in wet conditions. Inspect cables and connections for damage before each use.
• Matsa iska: Use clean, dry, oil-free compressed air. Ensure air pressure is within the recommended range.
• Zafafan Filaye: The torch and workpiece will become extremely hot during operation. Allow them to cool before handling.

2. Samfurin Ya Ƙareview

The FLARING FC650D is a versatile and portable 65 Amp plasma cutter designed for efficient and clean cutting of various metal types. It features advanced IGBT inverter technology and dual voltage capability for flexible power options.

The FLARING FC650D Plasma Cutter and its included accessories.

Illustration of key features including large capacitance, dual voltage, strong heat dissipation, fast cutting, and ease of use.

Mabuɗin fasali:

• High Efficiency Cutting: Max severance cut up to 4/5" (20 mm), ideal clean cut 1/2" (12.7mm) with 60% duty cycle.
• Dual Voltage: Operates on both 120V and 240V (50/60 Hz) power sources without manual relinking.
• Faɗin Aikace-aikacen: Suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, titanium, and other metal materials.
• Mai šaukuwa da nauyi: Weighs only 8.4 pounds, making it easy to transport.
• Stable and Durable: Features automatic arc control for consistent cutting, reducing user fatigue.

The plasma cutter utilizes an Original IGBT chip for reliable performance.

An efficient cooling fan ensures strong heat dissipation during operation.

3. Components and Panel Introduction

Your FLARING FC650D Plasma Cutter comes with the following components:

• FC650D Plasma Cutter Unit
• PT31 Torch (9.9ft)
• Heavy-duty ground clamp da kebul
• Air regulator and hose
• 7 Electrodes
• 7 Tips
• Gas Hose
• Conversion line 120V to 240V

A visual representation of the upgraded FC650D accessories included with your plasma cutter.

Gabatarwa Panel:

Dalla-dalla view of the plasma cutter's control panel and connections.

1. Dijital Nuni LED
2. Current Adjustable Knob
3. Mai Haɗa Torch
4. Canja Wuta
5. Duniya Clamp Mai haɗawa
6. Canjin Wuta
7. Wutar Wuta
8. Knob Control Matsi
9. Mai Sanyi Fan
10. Ma'aunin Matsi

4. Saita

1. Haɗin Wuta: Connect the power cable to a suitable 120V or 240V (50/60 Hz) power outlet. The machine automatically detects the voltage. Use the provided conversion line if necessary.
2. Haɗin Samar da Jirgin Sama: Connect your compressed air source to the air regulator. Attach the air hose from the regulator to the plasma cutter's air inlet. Ensure the air supply is clean, dry, and oil-free. Set the air pressure using the Pressure Control Knob and monitor with the Pressure Gauge.
3. Haɗin Torch: Connect the PT31 Torch to the Torch Connector on the front panel. Ensure it is securely fastened.
4. Kasa Clamp Haɗin kai: Attach the heavy-duty ground clamp to the Earth Clamp Connector. Securely clamp kasa clamp to the workpiece or a clean, bare metal part of the work table, ensuring good electrical contact.
5. Consumables Check: Verify that the torch tip and electrode are correctly installed and in good condition. Replace if worn.

5. Umarnin Aiki

Follow these steps for effective and safe plasma cutting:

1. Kunna Wuta: Flip the Power Switch to the 'ON' position. The LED Digital Display will illuminate.
2. Daidaita Wutar Lantarki: Use the Current Adjustable Knob to set the desired cutting current (Amps) based on the material type and thickness. Refer to the specifications table for recommended settings.
3. Daidaita Hawan iska: Ensure the air pressure is set correctly for optimal cutting performance. The recommended range is typically indicated on the machine or in the specifications.
4. Shirya Kayan Aiki: Ensure the workpiece is clean and free of rust, paint, or other contaminants that could interfere with the arc.
5. Initiate Arc: Position the torch nozzle close to the edge of the workpiece. Press the Torch Switch to initiate the pilot arc.
6. Fara Yanke: Once the pilot arc is established, move the torch steadily across the material. Maintain a consistent travel speed and standoff distance for a clean cut. The machine's automatic arc control helps maintain the arc, even over expanded metal.
7. Cutting Various Materials: The FC650D is capable of cutting a wide range of metals, including steel, stainless steel, aluminum, copper, brass, and cast iron. Adjust current and speed accordingly.

Examples of plasma cutting on different metal thicknesses (5mm, 10mm, 15mm).

The plasma cutter is suitable for a wide range of applications, including various metals and alloys.

Bidiyon Muzaharar:

6. Kulawa

Kulawa akai-akai yana tabbatar da tsawon rai da kuma ingantaccen aikin na'urar yanke plasma.

• Consumable Replacement: Regularly inspect and replace worn torch tips and electrodes. Worn consumables can lead to poor cut quality and damage to the torch.
• Air Filter/Regulator: Periodically check and drain any moisture from the air filter/regulator. Ensure the filter element is clean to prevent contaminants from entering the torch.
• Tsaftacewa: Keep the machine clean and free of dust and metal particles. Use compressed air to blow out internal components if necessary, ensuring the machine is unplugged.
• Duban Kebul: Inspect all cables (power, torch, ground) for cuts, abrasions, or loose connections. Repair or replace damaged cables immediately.

7. Shirya matsala

If you encounter issues with your plasma cutter, refer to the following common problems and solutions:

If problems persist after attempting these solutions, please contact FLARING customer support.

8. Ƙayyadaddun bayanai

Detailed technical specifications for the FLARING FC650D Plasma Cutter:

Official specification chart for the FC650D model.

9. Garanti da Tallafawa

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact FLARING customer service directly. You can often find contact details on the manufacturer's official website ko ta wurin siyan ku.