Gabatarwa
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber 60 cm 1500 m³/hr Autoclean Kitchen Chimney, model HOOD DAZZLE BLDC FL HC BK 60. Please read these instructions carefully before using the appliance and retain them for future reference.
Image: Front angled view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showcasing its overall design.
Muhimman Umarnin Tsaro
- Ensure the chimney is installed by a qualified technician according to local regulations.
- Do not operate the chimney if the power cord is damaged. Contact authorized service personnel for repairs.
- Maintain adequate ventilation in the room when the chimney is in use, especially if other fuel-burning appliances are present.
- Clean the chimney regularly to prevent grease buildup, which can be a fire hazard.
- Do not flambé under the chimney.
- Keep children away from the appliance during operation and cleaning.
- Disconnect the power supply before any cleaning or maintenance.
Saita da Shigarwa
The Faber HOOD DAZZLE BLDC FL HC BK 60 is a wall-mounted kitchen chimney. Proper installation is crucial for optimal performance and safety.
Cire kaya da abubuwan da aka gyara
Carefully unpack the chimney and check for any damage. The package should contain:
- 1 x Faber Kitchen Chimney unit
- 1 x Manhajar mai amfani
- Installation hardware (screws, wall plugs, etc. - typically included)
Yin hawa
This chimney is designed for wall-mounted installation. Ensure the wall is strong enough to support the appliance's weight (approximately 18 kg). The recommended mounting height above the cooking surface should be followed as per local safety standards and the chimney's specifications to ensure effective suction and safety.
Hoto: Gaba view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showcasing ta baƙar fata zane da kuma kula da panel.
Image: Side angled view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showing its profile and exhaust duct cover.
Hoto: Kasa view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showing the filterless intake area.
Haɗin lantarki
The chimney operates on 230 Volts. Ensure the electrical outlet is properly grounded and meets the required specifications. It is recommended to have a dedicated circuit for the appliance.
Umarnin Aiki
Your Faber chimney features advanced controls for ease of use, including touch, gesture, and remote control options.
Control Control Overview
The control panel is located on the front of the chimney. It includes touch-sensitive buttons for various functions and an LED display.
Hoto: Angled view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, highlighting the touch and gesture control panel.
Image: Close-up of the control panel on the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showing power, light, and speed settings.
Ayyuka
- Kunnawa/Kashewa: Use the dedicated power button on the control panel or remote.
- Suction Speed Adjustment: Adjust the suction power up to 1500 m³/hr using touch controls, gestures, or the remote. Higher speeds are recommended for heavy cooking.
- Hasken LED: The chimney is equipped with LED lights to illuminate your cooking area. Activate them via the control panel or remote.
- Heat Auto Clean: This feature automatically cleans the internal components by heating and melting grease, which then collects in an oil collector. Refer to the Maintenance section for details.
Ikon nesa
The included remote control allows for convenient operation from a distance. It typically includes buttons for power, light, and suction speed adjustment.
Image: A hand holding the remote control for the Faber chimney, demonstrating its use for simplified cooking.
Image: Illustration of gesture control functionality for the Faber chimney, showing hands interacting with the sensor area.
Kulawa da Tsaftacewa
Regular maintenance ensures the longevity and optimal performance of your Faber chimney. Always disconnect the power supply before cleaning.
Heat Auto Clean Function
The Heat Auto Clean feature is designed to simplify internal cleaning. When activated, a heating element melts accumulated grease, which then flows into a removable oil collector. It is recommended to run the auto-clean cycle periodically, depending on your cooking frequency.
- To activate, press the dedicated Auto Clean button on the control panel or remote.
- The cycle duration may vary. Do not interrupt the process.
- After the cycle, carefully remove and empty the oil collector. Clean it with warm soapy water.
Image: Illustration depicting the auto-clean technology of the Faber chimney, showing grease being collected in the oil collector.
Tsabtace Waje
Goge saman waje na bututun hayaki da zane mai laushiampened with mild detergent. Avoid abrasive cleaners or scouring pads, as they can damage the matte black finish.
Fasaha maras Tace
This chimney utilizes filterless technology, reducing the need for frequent filter cleaning or replacement. The internal design and auto-clean function manage grease collection efficiently.
Jagoran Shirya matsala
Kafin tuntuɓar sabis na abokin ciniki, da fatan za a duba batutuwan gama gari da mafita:
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Chimney does not turn on. | No power supply; loose connection; power outage. | Check power cord connection. Verify power outlet functionality. Check household circuit breaker. |
| Ƙarfin tsotsa. | Oil collector full; obstruction in ducting; incorrect speed setting. | Empty and clean the oil collector. Ensure ducting is clear. Increase suction speed. |
| Hayaniyar da ba ta dace ba yayin aiki. | Abubuwan da aka sako-sako; Abu na waje a cikin fan; batun mota. | Ensure all parts are securely fastened. If noise persists, contact service. |
| Auto Clean function not working. | Power issue; sensor malfunction. | Ensure power supply is stable. If issue persists, contact service. |
Idan matsalar ta ci gaba bayan an gwada waɗannan hanyoyin, tuntuɓi tallafin abokin ciniki na Faber.
Ƙayyadaddun samfur
| Sunan Samfura | HOOD DAZZLE BLDC FL HC BK 60 |
| Alamar | Faber |
| Nau'in hawa | Jikin bango |
| Nisa | 60 cm |
| Ƙarfin tsotsa | 1500 m³/hr (Cubic Meters Per Hour) |
| Nau'in Tace | Filterless |
| Nau'in Aiki | Heat Auto Clean |
| Gama | Matte Black |
| Sarrafa | Touch & Gesture with Remote control |
| Girman samfur (WxDxH) | 59.7 x 45.5 x 51.2 cm (597x455x512 MM) |
| Voltage | 230 Volts |
| Nauyin Abu | 18 kilogiram |
| Matsayin Surutu | 56 Decibel |
| Nau'in Tushen Haske | LED |
| Amfanin Makamashi na Shekara-shekara | 180 kilowatts |
| Mai ƙira | Kamfanin Franke Faber na Indiya Ltd. |
Bayanin Garanti
Your Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney comes with a comprehensive warranty:
- Garanti na samfur: shekaru 5
- Garanti na Motoci: shekaru 12
Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects under normal use conditions. For detailed terms and conditions, refer to the warranty card included with your product or contact Faber customer service.
Tallafin Abokin Ciniki
For any queries, technical assistance, or service requests regarding your Faber kitchen chimney, please contact Faber customer support. You can find contact details on the Faber official website or your warranty card.
Manufacturer: Franke Faber India Pvt Ltd